2016 Citroen JUMPER key

134
jumper_en_Chap07_Verifications_ed01-2015
Low fuel level
rEF

u
ELLI
n
G
In low temperatures
In mountainous and/or cold areas, it is
advisable to use a "winter" type fuel suited
to low or minus temperatures. With Stop & Start, never refuel with
the system in ST
o

P mode; you must
switch off the ignition with the key. When the fuel tank level E
(Empty) is reached, this warning
lamp comes on.
You then have around 10 to
12 litres in the reserve, depending on the
capacity of the tank, the engine type, the
driving conditions and the profile of the road.
r
efuel without delay to avoid running out of
fuel.
The capacity of the fuel tank is
approximately 90 litres.
Fuel tanks of different capacities, 60 and
120 litres, may be fitted. The fuel tank must be filled with the engine
off.
- o pen the fuel filler flap.
-
Support the black cap with one hand.
-

With the other hand, insert the key
, then
turn it anticlockwise.
- r emove the black cap and hook it onto
the clip located on the inside of the flap.
A label affixed to the inside of the flap
reminds you of the type of fuel to be used.
When filling the fuel tank, do not continue
after the 3rd cut-off of the nozzle. This could
cause malfunctions.
-
After filling the fuel tank, lock the black

cap and close the flap.
BlueH d i and AdBlue additive
The blue cap is only present on BlueHDi
Diesel versions.
For more information, refer to the "AdBlue
additive section". To understand the significance of the
precautions mentioned on the labels,
refer to the "Quick help - Label glossary"
section.
Fuel

164
jumper_en_Chap08_Aide-rapide_ed01-2015
tOWBAr WItH QuIcKLY dE -
t
A
c HABLE t
OWBALL
Presentation
This towball can be fitted and removed
quickly and easily without the use of tools. For information on the maximum
trailer weight and the recommended
nose weight, refer to the "Technical data -
Weights" section.
For information on safely towing a trailer,
refer to the "Accessories - Towing a trailer"
section.
1.
Carrier
2.

Connector socket.
3.


Safety eye.
4.


Detachable towball.
5.


Locking / unlocking wheel.
6.


Key lock.
7.


Key reference label. A.


Locked
position; the locking wheel is in
contact with towball (no gap).
B.
u
nlocked position; the locking wheel
and towball are no longer in contact
(gap of about 5 mm). Before each use
Check that the towball is correctly
locked and verify the following points:
- the green mark on the locking wheel
is in line with the green mark on the
towball,
-

the locking wheel is in contact with the

towball,
-

the key lock is on and the key removed;

the locking wheel can no longer be
operated,
-

the towball must no longer move at all in

its carrier; try to shake it by hand.
d

uring use
n

ever unlock the device when a trailer or
load carrier is fitted to the towball.
n

ever exceed the maximum authorised
weight for the vehicle (the Gross Vehicle
Weight - GVW), the trailer, or the sum of the
two (the Gross Train Weight - GTW).
o

bserve the legislation in force in the
country in which you are driving. After use
For journeys made without a trailer or load
carrier, the towball must be removed and
the blanking plug inserted in the carrier. This
measure applies particularly if the towball
could hinder visibility of the number plate or
lighting.
Transport solutions

165
jumper_en_Chap08_Aide-rapide_ed01-2015
Fitting the towball
Below the rear bumper, remove the
protective plug from the towball carrier.
i
nsert the end of the towball 4
into the
carrier 1 and push upwards; it locks in place
automatically. Check that the mechanism has correctly
locked in to place (position A
).
Close the lock 6 using the key.
The locking wheel 5 turns a quarter of a turn
anti-clockwise; take care to keep your hands
clear. Always remove the. The key cannot be
removed when the lock is open.
Clip the cap onto the lock.
Transport solutions
QUiCK HELP
8

166
jumper_en_Chap08_Aide-rapide_ed01-2015
removing the towball
Disconnect the trailer harness from the
socket 2 on the carrier.
Detach the cable on the trailer from the
safety ring 3 on the carrier.
Unhook the trailer from the towball.
r

efit the protective cover to the towball.
r

emove the protective cover from the
towball.
Attach the trailer to the towball.
Attach the cable on the trailer to the safety
ring 3 on the carrier.
Connect the trailer harness to the socket 2
on the carrier.
r
emove the cap from the lock and press it
onto the head of the key.i nsert the key into the lock 6.
o

pen the lock using the key.
Transport solutions

168
jumper_en_Chap08_Aide-rapide_ed01-2015
GLOSSArY OF LABELS
This section groups together all of the texts that appear on labels pres\
ent on the vehicle.under the bonnet
A
o

riginal painting
Colour
Code
r

EF ini SH in G C o DE
B
A
ir C on D i T ion ED VEH i CLE - r 134A -
"CFC" F
r EE
QTY
r 134A (kg)
c
on

LY F or JUMP STA r
T
d
DA

n GE r
AUTo

MAT i C E n G in E r ESTA r
T
. EXT r ACT
THE KEY F
ro M DASHB o A r D WHE n

H

oo D i S o PE n ED
For the vehicle identification labels, refer to the "Technical data" section.
Precautions...

169
jumper_en_Chap08_Aide-rapide_ed01-2015
E
1 - CAUTion
oriGinAL LUBriCAnTS AnD FLUiDS
Engine oil T
ransmission
r

adiater Brake system
Windscreen Washer Power steering
r

EFE
r
T
o


o
W
n
E
r
HA n DB oo K WEA
r EYE P ro TECT ion
2 - SAFETY
The use of original parts, fluids and original lubrificants and respecti\
ng scheduled


maintenance guarantees your cars reliability and safety overtime.
3 - DA
n
GE
r
KEEP oUT oF CHiLDrEn'S
r
EACH KEEP AWAY F
ro M
FLAMES D
o no T To UCH
D
o no T o PE n CAP W i TH
E
n G in E WA r MEXPL
o S ion
C
orro S i VE L i QU i D
MAY STA
r
T
AUT
o
MAT i CALLY EVE n W i TH E n G in E o FFH
i GH P r ESSU r E GAS D o

no

T o PE n
AUTo

MAT i C E n G in E r ESTA r
T
. EXT r ACT THE KEY
F
ro M DASHB o A r D WHE n B onn ET H oo D i S o PE n EDH
i GH V o LTAGE
Precautions...
QUiCK HELP
8

189
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Level 1Level 2 Level 3co mment
rAd

IO Briefly press the buttons for an automatic search.
Press and hold the buttons for a quick search.
rAd

IO
Preset Make a long press on the button to present the
current radio station.
The current station is highlighted.
Press the "All" button to display all of the preset
radio stations in the waveband selected.
rAd

IO
n

avigate List of stations
Selection a station with a press.
Update the list according to reception.
Press these buttons to scroll through the radio
stations received.
Go directly to the desired letter in the list.
rAd

IO
AM/FM/
d
A
B
ch
oose the waveband Choose the waveband
rAd

IO
Adjustment
dir

ect adjustment The screen virtual keypad can used to enter a
single number corresponding to a station.
The symbols allow precise adjustment of the
frequency.
rAd

IO
Info Information
Display information on the current radio station.
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10

207
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Level 1Level 2 Level 3co mment
PHO
nE M

obile phone
Display and call contacts present in the mobile
phone.
Press these buttons to scroll through the list of
contact names.
Go directly to the desired letter in the list.
PHOnE
re

cent calls All callsDisplay and call contacts from the recent calls log.In
Out
Missed
PHO
nE
The system memory contains predefined text
messages, which can be sent to reply to a message
received or as a new message.
on r

eceipt of a text message (depending on the
telephone), the system also allows the message in
question to be sent.
PHOnE
S ettingste l. connected DisconnectAssociate up to 10 telephones/audio devices to
simplify and speed up access and connection.
Delete device
Save favourites
Te x t s
o
n
D

ownload
Add device
Audio connect.
PHO
nEc

all
Dial the telephone number using the vir tual keypad
in the screen.
PHOnE
tr
a n s f .tr a n s f .Transfer calls from the system to the mobile phone
and vice versa.
MuteSwitches of the system microphone for private
conversations.
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10