2016 Citroen JUMPER ESP

145
jumper_en_Chap08_Aide-rapide_ed01-2015
The three fuseboxes are located in the
dashboard on the left-hand side, in the
right-hand side pillar and in the engine
compartment.
The descriptions provided cover only the
fuses that can be replaced by the user. For
any other replacement, go to a Ci T roën

dealer or a qualified workshop.
removing and fitting a fuse
Before changing a fuse, the cause of the
fault must be found and rectified. The fuse
numbers are indicated on the fusebox.
Always replace a faulty fuse with a fuse
of the same rating.
cHAnGInG A F u SECiTroën does not accept any
responsibility for expenses incurred
by repairs to your vehicle or for any
malfunctions resulting from the installation
of additional accessories which are not
supplied or recommended by C
i T roën

and which are not installed in accordance


with its instructions, in particular when
the combined consumption of all of the
additional equipment connected exceeds
10

milliamperes.
Good
Failed
Information for technicians: for
complete information on the fuses and
relays, refer to the wiring diagrams in the
workshop procedures via the C
i
T
roën

dealer network.
dashboard, left-hand side,
fuses
remove the bolts and tilt the box to access
the fuses.
Failed fuse
QUiCK HELP
8

153
jumper_en_Chap08_Aide-rapide_ed01-2015
rear lamps
Carry out these operations in reverse order
to fit the new bulb.
1.
Brake lamps


t
ype B,

P21W - 21W
2.

Brake/sidelamps


t
ype B,

P21/5W - 21W and 5W
3.
d
irection indicators

t
ype B,

PY 21W - 21W
4.
r
eversing lamps

t
ype A,

W16W - 16W
5.

Foglamp


t
ype A,

W16W - 16W -
i dentify the failed bulb then open the
rear doors.
- r emove the corresponding access cover
by removing the seven fixing screws
(van) or


r emove the corresponding access cover
by pulling on its grip to unclip it (combi).
-

Disconnect the electrical connector by

pressing on its central tongue.
-
r emove the two fixing nuts of the lens.
-

Pull the lens from the outside.-

r emove the six bulb holder fixing
screws.
-
Spread the three retaining tongues and

remove the bulb holder from its housing.
-
Change the bulb.
For more information on the bulbs,

refer to the table "Types of bulb or
lamp".
Failed bulb or lamp
QUiCK HELP
8

169
jumper_en_Chap08_Aide-rapide_ed01-2015
E
1 - CAUTion
oriGinAL LUBriCAnTS AnD FLUiDS
Engine oil T
ransmission
r

adiater Brake system
Windscreen Washer Power steering
r

EFE
r
T
o


o
W
n
E
r
HA n DB oo K WEA
r EYE P ro TECT ion
2 - SAFETY
The use of original parts, fluids and original lubrificants and respecti\
ng scheduled


maintenance guarantees your cars reliability and safety overtime.
3 - DA
n
GE
r
KEEP oUT oF CHiLDrEn'S
r
EACH KEEP AWAY F
ro M
FLAMES D
o no T To UCH
D
o no T o PE n CAP W i TH
E
n G in E WA r MEXPL
o S ion
C
orro S i VE L i QU i D
MAY STA
r
T
AUT
o
MAT i CALLY EVE n W i TH E n G in E o FFH
i GH P r ESSU r E GAS D o

no

T o PE n
AUTo

MAT i C E n G in E r ESTA r
T
. EXT r ACT THE KEY
F
ro M DASHB o A r D WHE n B onn ET H oo D i S o PE n EDH
i GH V o LTAGE
Precautions...
QUiCK HELP
8

173
jumper_en_Chap09_Caracteristiques-Techniques_ed01-2015
dIMEnSIOnS
The dimensions are given in millimetres.
This model is available in 4 lengths (L1...) and 3 heights (H1...); refer to the corresponding tables:VA
n
L1L2L3L4
H1 H2 H1 H2 H2 H3 H2 H3
L
o

verall length 4
9635
4135
9986
363
H
o

verall height 2
254 2 524 2 254 2 524 2 524 2 764 2 524 2 764
A Wheelbase 3
0003
4504
035
B Front overhang 948
cr

ear overhang 1
0151
380
dOverall width (incl./excl. mirrors)2 508 / 2

050
E Width of front track 1
810
F Width of rear track 1
790
G Height of load floor 535 to 565
I Length of interior floor 2
6703
1203
7054
070
jMaximum interior load height1

662 1 932 1 662 1 932 1 932 2 172 1 932 2 172
K Maximum interior width 1
870
M
i

nterior width between wheel arches 1
422
Volume (m
3) 89.5 10 11.5 13 15 15 17
9
TECHniCAL DATA
Dimensions

185
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Screen off / on.
Activate, deactivate, adjust certain
system and vehicle functions. Eject CD.
Mute / restore volume (mute / pause).
Abandon the current operation.
Go up one level (menu or folder). Press: on / off.
Rotate: adjust the volume
(each source is independent).
Radio, rotate: search for a radio
station.
Media, rotate: select the previous /
next track.
Press: confirm the option displayed in
the screen.The screen is of the "resistive" type, it
is necessary to press firmly, particularly
for "flick" gestures (scrolling through a
list, moving the map...). A simple wipe
will not be enough. pressing with more
than one finger is not recognised.
The screen can be used when wearing
gloves. This technology allows use at
all temperatures.
To clean the screen, use a soft
non-abrasive cloth (spectacles cloth)
without any additional product.
Do not use pointed objects on the
screen.
Do not touch the screen with wet
hands.
Glossary
Menu
item Significance /
co rresponding
action
V
o
LU
ME Adjust the volume by rotation.
rA

D io
A
ccess the radio menu.
MED
iA A

ccess the media menu and the
different audio sources.
nAV A

ccess the navigation menu.
PH
o

n
E A

ccess the telephone menu.
M
or
E A

ccess vehicle information.
B
r

o
W
SE
TU
n E
SC
roL

LTurn the button to:
-

m
ove in a menu or a list.
-

s
elect a radio station.
E
nT

E r
C
onfirm an option displayed in
the screen by pressing.
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10

189
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Level 1Level 2 Level 3co mment
rAd

IO Briefly press the buttons for an automatic search.
Press and hold the buttons for a quick search.
rAd

IO
Preset Make a long press on the button to present the
current radio station.
The current station is highlighted.
Press the "All" button to display all of the preset
radio stations in the waveband selected.
rAd

IO
n

avigate List of stations
Selection a station with a press.
Update the list according to reception.
Press these buttons to scroll through the radio
stations received.
Go directly to the desired letter in the list.
rAd

IO
AM/FM/
d
A
B
ch
oose the waveband Choose the waveband
rAd

IO
Adjustment
dir

ect adjustment The screen virtual keypad can used to enter a
single number corresponding to a station.
The symbols allow precise adjustment of the
frequency.
rAd

IO
Info Information
Display information on the current radio station.
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10

193
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Select the "navigate" tab.
Press repeatedly on "
rAd
IO
" to
display the "DAB r
a
dio".
Select a list from the filters offered:
" All ", "Genres ", Multiplex " then
select a radio station.
Press the "
upd

ate" button to update
the list of "DAB
r
a
dio" stations
received.
dAB / FM auto trackingdi
gital radio
"DAB" does not cover 100% of the
te r r i to r y.
When the digital radio signal is weak,
the " AF" (alternative frequencies)
option allows you to continue listening
to the same station, by automatically
switching to the corresponding "FM"
analogue station (if there is one).
When the system switches to analogue
radio, there is a difference of few
seconds with sometimes a change in
volume.
When the digital signal is restored, the
system automatically changes back to
" DA B ".
Digital radio provides higher quality
reception and also the graphical display
of current information on the radio
station being listened to.
The range of multiplexes available is
displayed in alphabetical order.
if t

he "DAB" station being listened to
is not available, the sound will cut out
while the digital signal is too weak.
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10

213
jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015
Level 1Level 2 Level 3co mment
Settings
d

isplay Brightness
Set the brightness of the screen.
d

isplay mode Manual
Set the display mode.
Auto
Language Deutsch
Choose the desired language.
English
Español
Français
it

aliano
ne

derlands
Polski
Português
Türkçe
un

its of measurement Fuel consumption
Set the units used for the display of fuel
consumption, distance and temperature.
Distances
Temperature
to

uch screen sound
o
nActivate or deactivate the audible signal when
touching a screen button.
of

f
di

splay trip B
o
nDisplay Trip B in the driver's screen.
of

f
Touch Screen Audio - Telematic System
AUDio and TELEMATiCS
10