2016 CITROEN DS3 CABRIO light

The heating / ventilation or air conditioning systems operates with the engine running, as well as in STOP mode with Stop & Start.
1. Temperature adjustment
F Turn  the   dial   from   blue  (
cold)   to   red   (hot)   to   adjust  
t

he   temperature   to   your  
r

equirements.
2. Air flow adjustment
F Turn   the   dial   from   position   1
to position 5 to obtain a
comfortable
  air   flow.
F

I

f you place the air flow control
in position 0
  (deactivation   of   the  
s

ystem),   the   temperature   is   no  
l

onger   maintained   at   a   comfortable  
l

evel.   However,   a   slight   flow   of   air,  
d

ue  
t
o  
t
he  
m
ovement  
o
f  
t
he  
v
ehicle,  
c

an   still   be   felt.
3. Air distribution adjustment
Windscreen and side windows.
W indscreen,   side   windows   and  
f

ootwells.
Footwells.
Central
  and   side   vents.
The
  air   distribution   can   be  
a

dapted   by   placing   the   dial  
i

n   an   intermediate   position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air insulates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
Return
  to   exterior   air   intake   as   soon   as   possible  
t

o   prevent   deterioration   of   the   air   quality   and  
t

he   formation   of   mist.
Manual control panel F
 
M
ove   the   manual   control   to  
t

he   left   to   be   in   the   "recycling  
i

nterior   air"   position.
F
 
M
ove   the   manual   control   to   the  
r

ight   to   return   to   the   "fresh   air  
i

ntake"   position.

6. Air distribution adjustment
Pressing this button several times in succession enables the air flow to be
directed
  in   turn   towards:
-
 
t

he
 
windscreen   and   the   side   windows  
(

demisting   or   defrosting),
-
 
t

he
 
windscreen,   side   windows   and   air  
ve

nts,
-
 
t

he
 
windscreen,   the   side   windows,   the   air  
v

ents
  and   the   footwells,
-
 
t

he
 
windscreen,   the   side   windows   and   the  
f

ootwells,
-
 
t

he
 
footwells,
-
 
t

he
 
air   vents   and   the   footwells,
-
 
t

he
 
air   vents.
Avoid driving for long periods with the air c onditioning   switched   off   (risk   of   misting a

nd   reduction   of   the   air   quality   in   the   cabin).
Press the "full fan" button to
increase   the   air   flow.
7. Air flow adjustment
The air flow symbol, the fan, fills progressively according   to   the   value   requested.
Press the "empty fan" button to
decrease
  the   air   flow.
Switching the system off
Press the air flow "empty fan"
button 7   until   the   fan   symbol  
d

isappears.
This action switches off all of the functions of
the
 
air
 
conditioning   system.
Thermal
 
comfort   is   no   longer   controlled.  
A s

light
 
flow   of   air   resulting   from   the   movement  
o

f
 
the
 
vehicle,   remains   perceptible   however.
Pressing
 
the   air   flow   "full fan" button 7 or
on "AUTO"
 

reactivates   the   system   with   the  
v

alues
 
set   before   it   was   switched   off.

101
To remove the shelf:
F  u nhook   the   two   cords,
F
 
r
aise   the   shelf   slightly,   then   unclip   it   on  
e

ach   side.
Rear parcel shelf
F Raise   the   boot   carpet   by   pulling   the   strap  u
pwards   to   gain   access   to   the   storage   box.
Storage box
F Refit  the   boot   floor   carpet   by   folding   it  s
lightly   in   the   middle.
This
 
has
 
areas
 
for
 
storing
 
a
 
temporary
 
puncture
 
r

epair
 
kit,
 
a
 
box
 
of
 
spare
 
bulbs,
 
a
 
first
 
aid
 
kit,
 
t

wo
 
warning
 
triangles,
 
...
Comfort

A few driving recommendations
Observe the driving regulations at all times and remain vigilant whatever the traffic conditions.
P ay   close   attention   to   the   traffic   and   keep   your   hands   on   the   wheel   so   that   you   are   ready   to   react   at  
a

ny   time   to   any   eventuality.
On
  a   long   journey,   a   break   every   two   hours   is   strongly   recommended.
In
  difficult   weather,   drive   smoothly,   anticipate   the   need   to   brake   and   increase   the   distance   from  
o

ther
 v
ehicles.
driving on flooded roads
We strongly advise against driving on flooded roads,   as   this   could   cause   serious   damage  
t

o   the   engine   or   gearbox,   as   well   as   to   the  
e

lectrical   systems   of   your   vehicle.
Important!
Never drive with the parking brake applied   -   Risk   of   overheating   and  
d

amage   to   the   braking   system!
Do
  not   park   or   run   the   engine   when  
s

tationary   in   areas   where   inflammable  
s

ubstances   and   materials   (dry   grass,  
d

ead   leaves...)   might   come   into   contact  
w

ith   the   hot   exhaust   system   -   Risk   of  
f

ire!
Never
  leave   a   vehicle   unsupervised  
w

ith   the   engine   running.   If   you   have  
t

o   leave   your   vehicle   with   the   engine  
r

unning,   apply   the   parking   brake  
a

nd   put   the   gearbox   into   neutral   or  
p

osition

n or P,
  depending   on   the   type  
o

f   gearbox.
-
 
c

heck
 
that
 
the
 
depth
 
of
 
water
 
does
 
not
 
e

xceed
 
15
 
cm,
 
taking
 
account
 
of
 
waves
 
t

hat
 
might
 
be
 
generated
 
by
 
other
 
users,
-
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system,
-
 
d

rive
 
as
 
slowly
 
as
 
possible
 
without
 
s

talling.
 
In
 
all
 
cases,
 
do
 
not
 
exceed
 
6
 
mph
 
(

10 km/h),
-
 
d

o
 
not
 
stop
 
and
 
do
 
not
 
switch
 
off
 
the
 
e

ngine.
If
 
you
 
are
 
obliged
 
to
 
drive
 
through
 
water: On
 
leaving
 
the
 
flooded
 
road,
 
as
 
soon
 
as
 
c

ircumstances
 
allow,
 
make
 
several
 
light
 
brake
 
a

pplications
 
to
 
dry
 
the
 
brake
 
discs
 
and
 
pads.
If
 
in
 
doubt
 
on
 
the
 
state
 
of
 
your
 
vehicle,
 
contact
 
a

 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.

There is a risk of damage to the gearbox:
-  i f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   selector   in
 t

he
n  

position   and   apply   the   parking   brake.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from  n to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop
 
as   soon   as   possible.
F
Sel
ect position M for sequential c
hanging o
f
 
the
 
four
 
gears.
F
 
P

ush
 
the
 
selector
 
towards
 
the
 
+
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F
 
P

ull
 
the
 
selector
 
towards
 
the
 
-
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
n 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Per fect
  for   urban   use,   the   Stop   &   Start   system   reduces   fuel   consumption   and   exhaust   emissions   as   well   as   the   noise   level   when   stationary.
Operation
going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "ECO" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-
 
w

ith a manual gearbox ,
 
at
 
speeds
 
below
 
1

2
 
mph
 
(20
 
km/h),
 
when
 
you
 
put
 
the
 
gear
 
l

ever
 
into
 
neutral,
 
and
 
you
 
release
 
the
 
c

lutch
 
pedal.
-
 
w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
y

ou
 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
s

elector in position
n
.
A

 
time
 
counter
 
calculates
 
the
 
sum
 o

f
 
the
 
periods
 
in
 
STOP
 
mode
 
during
 a

 
journey.
 
It
 
rests
 
itself
 
to
 
zero
 
every
 t

ime
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t

he
 
key. STOP
  mode   is   not   invoked   when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   key,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
Special cases: STOP mode not
available
The "ECO" warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.

Lighting controlsSystem for selection and control of the various front and rear lamps providing the vehicle's lighting.
T he   various   front   and   rear   lamps   of   the   vehicle  
a

re   designed   to   adapt   the   driver's   visibility  
p

rogressively   according   to   climatic   conditions:
-
 
s
idelamps,   to   be   seen,
-
 
d
ipped   beam   headlamps   to   see   without  
d

azzling
 o
ther
 d
rivers,
-
 
m
ain   beam   headlamps   to   see   clearly   when  
t

he   road   is   clear.
Main lighting
Other lamps are installed to fulfil the requirements   of   particular   conditions   of  
v

isibility:
-
 
a
  rear   foglamp   to   be   seen   from   afar,
-
 
f
ront   foglamps   for   improved   vision,
-
 
L
ED   lamps   to   be   seen   during   the   daytime.
Additional lighting
Various automatic lighting control modes are   also   available   according   to   the   following  
op

tions:
-
 
g
uide-me-home   lighting,
-
 
a
utomatic   illumination   of   headlamps.
Programming
In some weather conditions (e.g. low temperature   or   humidity),   the   presence  
o

f   misting   on   the   internal   sur face   of   the  
g

lass   of   the   headlamps   and   rear   lamps  
i

s   normal;   it   disappears   after   the   lamps  
h

ave   been   on   for   a   few   minutes.

135
Model without AUTO lighting
Model with AUTO lighting
Manual controls
The lighting is controlled directly by the driver by   means   of   the   ring   A   and   the   stalk   B.
Automatic
  illumination   of   headlamps.
B.
 S

talk   for   switching   the   headlamp   beam:  
p

ull   the   stalk   to   switch   between   dipped   and  
m

ain   beam   headlamps.
In
  the   lamps   off   and   sidelamps   modes,  
t

he   driver   can   switch   on   the   main   beam  
h

eadlamps   temporarily   ("headlamp   flash")   by  
m

aintaining   a   pull   on   the   stalk.
A.
 M

ain   lighting   mode   selection   ring:   turn   it  
t

o   position   the   symbol   required   facing   the  
ma

rk.Lighting
  off   /   daytime   running   lamps.
Sidelamps
 o

nly.
Dipped headlamps or main beam headlamps.
displays
Lighting of the corresponding indicator lamp on the   instrument   panel   confirms   the   switching   on  
o

f   the   lighting   selected.
The
  instrument   panel   has   permanent   back-
lighting.
  Illumination   of   the   instrument   panel   is  
t

herefore   not   linked   to   the   exterior   lighting.
Visibility