2016 CITROEN DS3 CABRIO headlamp

Exterior
Customising kits
These expressive stickers form part   of   a   range   of   kits,   very  
d

ifferent   one   from   another,   which  
a

llow   you   to   create   a   unique  
a

nd   attractive   exterior   for   your  
v

ehicle.
guide-me-home lighting
After switching off the ignition, under low lighting conditions the headlamps remain   on   for   a   few   seconds   to   help   you   leave   the   vehicle.
Active City Brake
The purpose of this system is to avoid a frontal   collision   or   reduce   the   speed   of   impact  
i

f   the   driver   does   not   react   or   does   not   react  
s

ufficiently.
237
137 157
Stop & Start
This system puts the engine t
emporarily   on   standby   during  
s

tops   in   the   traffic   (red   lights,   traffic  
j

ams,   etc...).   The   engine   restarts  
a

utomatically   as   soon   as   you   want   to  
m

ove   off.   Stop   &   Start reduces   fuel  
c

onsumption,   exhaust   emissions   and  
n

oise   levels   when   stationary.
120

Before moving off, if the passenger compartment is too warm, ventilate   it   by   opening   the   windows   and   air   vents   before   using   the   air  
c

onditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents  
ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the   temperature
 i

n   the   passenger   compartment   down   (sunroof   and   window   blinds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as  
s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
The
  gear   efficiency   indicator   invites   you   engage   the   most   suitable   gear:  
a

s   soon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
Control the use of your electrical
equipment
If your vehicle has cruise control, make use of the system at speeds a bove   25   mph   (40   km/h)   when   the   traffic   is   flowing   well.As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  c
onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect   your   portable   devices   before   leaving   the   vehicle.

23
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
W arning /indicator lampis on Cause Action / Observations
Left-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   down.
Right-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   up.
Sidelamps fixed. The
  lighting   stalk   is   in   the   "Sidelamps"  
p

osition.
di

pped beam
headlamps fixed.
The
  lighting   stalk   is   in   the   "Dipped  
b

eam   headlamps"   position.
Main beam
headlamps fixed.
The
  lighting   stalk   is   pulled   towards  
yo

u. Pull
  the   stalk   to   return   to   dipped   beam   headlamps.
Front foglamps fixed. The
  front   foglamps   are   switched   on  
u

sing   the   ring   on   the   lighting   control  
st

alk. Turn
  the   ring   on   the   lighting   control   stalk   rear ward  
t

wice   to   switch   off   the   front   foglamps.
Rear foglamps fixed. The
  rear   foglamps   are   on.Turn
  the   ring   on   the   stalk   rear ward   to   switch   off   the  
r

ear
 fo
glamps.
Hazard warning
lamps
flashing
  with   audible  
s

ignal. The
  hazard   warning   lamps   switch,  
l

ocated   on   the   dashboard,   has   been  
ope

rated. The
  left-hand   and   right-hand   direction   indicators   and  
t

heir   associated   indicator   lamps   flash   simultaneously.
Monitoring

Lighting controlsSystem for selection and control of the various front and rear lamps providing the vehicle's lighting.
T he   various   front   and   rear   lamps   of   the   vehicle  
a

re   designed   to   adapt   the   driver's   visibility  
p

rogressively   according   to   climatic   conditions:
-
 
s
idelamps,   to   be   seen,
-
 
d
ipped   beam   headlamps   to   see   without  
d

azzling
 o
ther
 d
rivers,
-
 
m
ain   beam   headlamps   to   see   clearly   when  
t

he   road   is   clear.
Main lighting
Other lamps are installed to fulfil the requirements   of   particular   conditions   of  
v

isibility:
-
 
a
  rear   foglamp   to   be   seen   from   afar,
-
 
f
ront   foglamps   for   improved   vision,
-
 
L
ED   lamps   to   be   seen   during   the   daytime.
Additional lighting
Various automatic lighting control modes are   also   available   according   to   the   following  
op

tions:
-
 
g
uide-me-home   lighting,
-
 
a
utomatic   illumination   of   headlamps.
Programming
In some weather conditions (e.g. low temperature   or   humidity),   the   presence  
o

f   misting   on   the   internal   sur face   of   the  
g

lass   of   the   headlamps   and   rear   lamps  
i

s   normal;   it   disappears   after   the   lamps  
h

ave   been   on   for   a   few   minutes.

135
Model without AUTO lighting
Model with AUTO lighting
Manual controls
The lighting is controlled directly by the driver by   means   of   the   ring   A   and   the   stalk   B.
Automatic
  illumination   of   headlamps.
B.
 S

talk   for   switching   the   headlamp   beam:  
p

ull   the   stalk   to   switch   between   dipped   and  
m

ain   beam   headlamps.
In
  the   lamps   off   and   sidelamps   modes,  
t

he   driver   can   switch   on   the   main   beam  
h

eadlamps   temporarily   ("headlamp   flash")   by  
m

aintaining   a   pull   on   the   stalk.
A.
 M

ain   lighting   mode   selection   ring:   turn   it  
t

o   position   the   symbol   required   facing   the  
ma

rk.Lighting
  off   /   daytime   running   lamps.
Sidelamps
 o

nly.
Dipped headlamps or main beam headlamps.
displays
Lighting of the corresponding indicator lamp on the   instrument   panel   confirms   the   switching   on  
o

f   the   lighting   selected.
The
  instrument   panel   has   permanent   back-
lighting.
  Illumination   of   the   instrument   panel   is  
t

herefore   not   linked   to   the   exterior   lighting.
Visibility

137
The temporary illumination of the dipped beam headlamps   after   the   vehicle's   ignition   has   been  
s

witched   off   makes   the   driver's   exit   easier  
w

hen   the   light   is   poor.
Switching on
F With  the   ignition   off,   "flash"   the   headlamps  u
sing   the   lighting   stalk.
F
 
A
  further   "headlamp   flash"   switches   the  
f

unction   off.
Switching off
The manual guide-me-home lighting switches off   automatically   after   a   set   time.
Manual guide-me-home
lighting
The sidelamps and dipped beam headlamps are   switched   on   automatically,   without   any  
a

ction   on   the   part   of   the   driver,   when   a   low   level  
o

f   external   light   is   detected   or   in   certain   cases  
o

f   activation   of   the   windscreen   wipers.
As
  soon   as   the   brightness   returns   to   an  
a

dequate   level   or   after   the   windscreen   wipers  
a

re   switched   off,   these   lamps   are   switched   off  
a

utomatically   and   the   daytime   running   lamps  
c

ome   on.
Automatic illumination of
headlamps
Activation
F Turn   ring   to   the   "AUTO"  position.   The  a
ctivation   of   the   function   is   confirmed   by  
t

he   display   of   a   message.
deactivation
F Turn  ring   to   a   position   other   than   "AUTO".  T
he   deactivation   of   the   function   is  
c

onfirmed   by   the   display   of   a   message.
Operating fault
In the event of a fault with the
sunshine  sensor,   the   lighting   come  
o

n,   this   warning   lamp   is   displayed  
o

n   the   instrument   panel   and/or   a  
m

essage   appears   in   the   screen,  
a

ccompanied   by   an   audible   signal.
Contact
 
a
 
CITROËN   or   a   qualified   workshop  
w

orkshop.
Visibility

LED daytime running lampsThis daytime lighting, a signature of the vehicle, comprises   two   sets   of   light-emitting   diodes  
(

LEDs),   located   in   vertical   housings   below   each  
h

eadlamp.
On
  starting   the   vehicle,   in   daylight   the   daytime  
r

unning   lamps   come   on   automatically,   if   the  
l

ighting   stalk   is   in   position   "0" or "AUTO" .
If
  the   sidelamps   and   headlamps   are   switched  
o

n   manually   or   automatically,   the   daytime  
r

unning   lamps   go   off.
In
 
fog
 
or
 
snow,
 
the
 
sunshine
 
sensor
 
m

ay
 
detect
 
sufficient
 
light.
 
Therefore,
 
t

he
 
lighting
 
will
 
not
 
come
 
on
 
au

tomatically.
Do
 
not
 
cover
 
the
 
sunshine
 
sensor,
 
c

oupled
 
with
 
the
 
rain
 
sensor
 
and
 
l

ocated
 
in
 
the
 
centre
 
of
 
the
 
windscreen
 
b

ehind
 
the
 
rear
 
view
 
mirror;
 
the
 
a

ssociated
 
functions
 
would
 
no
 
longer
 
be c

ontrolled.
Automatic guide-me-home
lighting
When the automatic illumination of headlamps f unctions   is   activated,   if   the   ambient   light   level  
i

s   low   the   dipped   beam   headlamps   remain   on  
w

hen   switching   off   the   ignition.
Settings
Activation and deactivation, as well as the duration   of   the   guide-me-home   lighting   can   be  
s

et   in   the   vehicle   configuration   menu   (except  
f

or   the   monochrome   screen   A,   for   which   the  
d

uration   is   fixed   at   60   seconds).

139
Travelling abroad
LEd / Xenon front lamps
For motoring in countries that drive on the other s
ide   of   the   road,   it   is   necessary   to   adjust   the  
d

ipped   beams   so   as   to   not   dazzle   the   drivers   of  
a

pproaching
 v
ehicles.
F
 
R
aise   the   bonnet   for   access   to   the   adjuster  
(

one   adjuster   per   headlamp).
F
 
I
nsert   a   suitable   allen   key   (not   supplied)  
i

nto   the   hexagonal   head   of   the   adjuster.
F
 
T
urn   the   allen   key   half   a   turn   clockwise.
Headlamp adjustment
To avoid causing a nuisance to other road u
sers,   the   height   of   the   headlamps   should   be  
a

djusted   in   relation   to   the   load   in   the   vehicle.
0.
 
D
river   only   or   driver   +   front   passenger.
-.
 I

ntermediate
 s
etting.
1.
 5

  people.
-.
 
5
  people   +   load   in   the   boot.
2.
 D

river   only   +   maximum   authorised   load   in  
t

he   boot.
This
  position   is   sufficient   to   avoid   causing  
d

azzle.
Higher
  settings   may   limit   the   spread   of   light  
f

rom   the   headlamps.
The
  initial   setting   is   position   "0". On
  your   return,   don't   forget   to  
a

djust   your   headlamps   back   to   their  
i

nitial   setting,   by   carrying   out   these  
o

perations   in   reverse   order.
Visibility