2016 Citroen C4 PICASSO ignition

209
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Operation of the rear foglamps is inhibited   with   the   tailgate   open.
Opening
  the   tailgate   when   these   lamps  
a

re on causes them and their indicator
lamp
  in   the   instrument   panel   to   go   off.
They
  do   not   come   back   on  
a

utomatically   when   the   tailgate   is  
c

losed:   they   must   be   switched   on   again  
u

sing   the   control   stalk. In
  good   or   rainy   weather,   by   both   day  a
nd   night,   the   front   foglamps   and   the  
r

ear   foglamps   are   prohibited.   In   these  
s

ituations, the power of their beams
may
  dazzle   other   drivers.   They   should  
o

nly   be   used   in   fog   or   falling   snow.
In these weather conditions, you should
switch
  on   the   foglamps   and   dipped  
b

eam headlamps manually, as the
sunshine sensor may detect sufficient
light.
Do
  not   forget   to   switch   off   the   front   and  
r

ear   foglamps   when   they   are   no   longer  
n

ecessary.Switching off the lighting
when switching off the ignition
When the ignition is switched off, all of the lamps   switch   off   immediately,   except   for   the d

ipped   beam   headlamps   if   automatic   guide-
me-home
  lighting   is   activated.
Switching on the lighting when
switching on the ignition
To reactivate the lighting control stalk, turn the   ring   A to position "0" 
-   lighting   off,   then t

o   the   position   of   your   choice.
When the driver's door is opened, a temporary   audible   signal   warns   you   that  
t

he   vehicle's   lighting   is   on.
They switch off automatically after a period
which  depends   on   the   state   of   charge   of   the b

attery   (entry   to   energy   economy   mode).
5
Lighting and visibility

210
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Automatic
When the automatic illumination of headlamps
is  activated   (lighting   control   stalk   at   the  
A

UTO   position),   if   the   ambient   light   level   is  
l

ow, the dipped beam headlamps come on
automatically
  when   switching   off   the   ignition.
Activation or deactivation of the system, as well
as
  the   period   of   operation   of   the   guide-me-
home
  lighting   is   set   in   the   touch   screen   tablet.
F

I
n the Driving menu, select the " Settings"
tab, then " Lighting" and "Guide-me-home
lighting ".
To
  adjust   the   period   of   operation,   select   the  
s

ymbol for the " Guide-me-home lighting "
function.
Parking lamps Guide-me-home lighting
Manual
Deactivation
The
  manual   guide-me-home   lighting   switches  
o

ff   automatically   after   a   set   time.
The temporary illumination of the dipped beam
headlamps
  after   the   vehicle's   ignition   has   been  
s

witched   off   makes   the   driver's   exit   easier  
w

hen   the   light   is   poor.
Side
 
markers
 
for
 
the
 
vehicle
 
by
 
illumination
 
of
 
t

he
 
sidelamps
 
on
 
the
 
traffic
 
side
 
only.
F
 
D

epending
 
on
 
version,
 
within
 
one
 
minute
 
o

f
 
switching
 
off
 
the
 
ignition,
 
operate
 
the
 
l

ighting
 
control
 
stalk
 
up
 
or
 
down
 
depending
 
o

n
 
the
 
traffic
 
side
 
(for
 
example:
 
when
 
p

arking
 
on
 
the
 
left;
 
lighting
 
control
 
stalk
 
u

pwards;
 
the
 
right
 
hand
 
sidelamps
 
are
 
on).
This
 
is
 
confirmed
 
by
 
an
 
audible
 
signal
 
and
 
i

llumination
 
of
 
the
 
corresponding
 
direction
 
i

ndicator
 
warning
 
lamp
 
in
 
the
 
instrument
 
panel.
To
 
switch
 
off
 
the
 
parking
 
lamps,
 
return
 
the
 l
ighting
 
control
 
stalk
 
to
 
the
 
central
 
position. Activation
F
 
W
ith   the   ignition   off,   "flash"   the   headlamps  
u

sing   the   lighting   stalk.
F
A f
urther "headlamp flash" switches the
function   off.
Lighting and visibility

214
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
To make your approach to the vehicle easier, these   illuminate:
-
 
t
he   zones   facing   the   driver’s   and  
p

assenger’s
 do
ors,
-

t
he zones for ward of the door mirrors and
rear ward
  of   the   front   doors.
Door mirror spotlamps
Switching on
Switching off
They go off automatically after 30 seconds.
Exterior welcome lighting
Switching on
F Press  the   open   padlock   on   the  r
emote control or one of the front
door handles with Keyless Entry
and
 S

tarting.
Front daytime running
lamps
(light-emitting diodes)
They come on automatically when the engine is   started,   when   the   lighting   control   stalk   is   in  
p

osition " 0" or " AUTO ".
In
  some   weather   conditions   (e.g.   low  
t

emperature or humidity), the presence
of
  misting   on   the   internal   sur face   of   the  
g

lass   of   the   headlamps   and   rear   lamps  
i

s   normal;   it   disappears   after   the   lamps  
h

ave   been   on   for   a   few   minutes. The
  remote   switching   on   of   the   lighting   makes  
y

our approach to the vehicle easier in poor
light.   It   is   activated   when   the   lighting   control  
i

s in the "
AUTO"   position   and   the   level   of   light  
d

etected   by   the   sunshine   sensor   is   low.
Switching off
The exterior welcome lighting switches off a
utomatically   after   a   set   time,   when   the   ignition  
i

s   switched   on   or   on   locking   the   vehicle.
When the courtesy lamp is in this
position, the spotlamps come on
automatically:
-
 w
hen
 
you
 
unlock
 
the
 
vehicle,
-
 
w

hen
 
you
 
remove
 
the
 
electronic
 
key
 
from
 
t

he reader,
-

w

hen you open a door,
-

when you use the remote control to locate the vehicle.
The dipped beam headlamps and sidelamps
come   on;   your   vehicle   is   also   unlocked.
Lighting and visibility

222
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Special position of the windscreen wipers
To maintain the effectiveness of the
"flat-blade" type of wiper blades, it is
advisable
 t
o:
-

h
andle them with care,
-
 
c
lean   them   regularly   using   soapy  
w

ater,
-
 
a
void   using   them   to   retain  
c

ardboard on the windscreen,
-
 
r
eplace   them   at   the   first   signs   of  
w

e a r.
This position permits release of the windscreen
wiper
 
blades.
It
 
is
 
used
 
for
 
cleaning
 
or
 
replacement
 
of
 
the
 
w

iper
 
blades.
 
It
 
can
 
also
 
be
 
useful,
 
in
 
winter,
 
to
 
d

etach
 
the
 
wiper
 
blades
 
from
 
the
 
windscreen.
On
 
switching
 
off
 
the
 
ignition:
F
 
a

ny
 
action
 
on
 
the
 
wiper
 
stalk
 
in
 
the
 
minute
 
a

fter
 
switching
 
off
 
the
 
ignition
 
places
 
the
 
w

iper
 
blades
 
vertically
 
on
 
the
 
screen.
When
 
the
 
system
 
is
 
no
 
longer
 
powered
 
-
 
at
 
l

east
 
one
 
minute
 
after
 
switching
 
off
 
the
 
i

gnition -
 
it
 
is
 
possible
 
to
 
move
 
the
 
arms
 
m

anually.
F
 
T

o
 
park
 
the
 
blades
 
again,
 
switch
 
on
 
the
 
i

gnition
 
and
 
operate
 
the
 
wiper
 
stalk. Replacement of the arms must only
be done by a CITROËN dealer or a
qualified
 w

orkshop.
Lighting and visibility

224
C4-Picasso-II_en_Chap06_securite_ed01-2016
Hazard warning lamps
Visual warning with all of the direction i
ndicators   flashing   to   alert   other   road   users   to   a  
v

ehicle   breakdown,   towing   or   accident.
F

P
ress this button, all of the direction
indicators
 f

lash.
They
  can   operate   with   the   ignition   off.
Automatic operation of
hazard warning lamps
When braking in an emergency, depending on the   deceleration,   the   hazard   warning   lamps  
c

ome   on   automatically.
They switch off automatically the first time you
accelerate.
F
 
Y
ou   can   also   switch   them   off   by   pressing  
t

he   button.
Horn
F Press   the   central   part   of   the   steering  w
heel. This
  system   allows   you   to   make   an   emergency  
o

r   assistance   call   to   the   emergency   services   or  
t

o   the   dedicated   CITROËN   service.
Emergency or 
a

ssistance call
For more information on the use of this
function, refer to the "Audio and telematics"
section.
Safety

227
C4-Picasso-II_en_Chap06_securite_ed01-2016
Anti-slip regulation (ASR)
Activation
This system is activated automatically each
time  the   vehicle   is   started.
It comes into operation in the event of a
problem
  of   grip.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate  
t

he DSC and ASR, so that the wheels can turn
freely
  and   regain   grip.
This
 
is
 
indicated
 
by
 
the
 
flashing
 
of
 
t

his
 
warning
 
lamp
 
in
 
the
 
instrument
 
pan

el. Reactivate the systems as soon as the level of
grip
  permits.
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Anti-slip
regulation ".
This indicator lamp comes on in the
instrument
 pan

el.
The
  ASR   system   will   no   longer   act  
o

n   the   operation   of   the   engine   and  
o

n   the   brakes   in   the   event   of   an  
i

nvoluntary   change   of   trajectory.
After
 
an
 
impact,
 
have
 
the
 
system
 
checked
 
by
 
a
 C
ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Operating fault
Reactivation
The system is reactivated automatically every
time
  the   ignition   is   switched   back   on   or   from  
3

0 mph   (50   km/h).
Below
  30   mph   (50   km/h),   you   can   reactivate   it  
m

anually:
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Anti-slip
regulation ".
Illumination
  of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message,   indicate   a   fault   with  
t

he   system.
Contact a CITROËN dealer or a qualified
workshop
  to   have   the   system   checked.
6
Safety

228
C4-Picasso-II_en_Chap06_securite_ed01-2016
Seat belts
Front seat belts
The front seat belts are fitted with a
pretensioning  and   force   limiting   system.
This system improves safety in the front
seats
  in   the   event   of   a   front   or   side   impact.  
D

epending   on   the   severity   of   the   impact,   the  
p

retensioning   system   instantly   tightens   the   seat  
b

elts   against   the   body   of   the   occupants.
The
  pretensioning   seat   belts   are   active   when  
t

he   ignition   is   on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, so
improving
  their   protection.
Front seat belt anchorage height
adjustment
F To  adjust   the   height   of   the   anchorage   point,  s
queeze the control and slide it up or down
to
  the   desired   notch.
Fastening
F Pull  the   strap,   then   insert   the   tongue   in   the  buc
kle.
F
 
C
heck   that   the   seat   belt   is   fastened  
c

orrectly   by   pulling   the   strap.
Unfastening
F Press  the   red   button   on   the   buckle.
F  G uide   the   seat   belt   as   it   reels   in.
Safety

231
C4-Picasso-II_en_Chap06_securite_ed01-2016
Seat belt not fastened and unfastened alerts
Rear seat belts not fastened
alert
The instrument panel includes a seat belt not-
fastened w
arning lam p A as well as an indicator
of the location of the non-fastened belts B .
When the system detects a non-fastened
or
  unfastened   seat   belt,   the   warning   lamp   A
comes
  on   as   well   as   the   corresponding   points  
i

n the indicator B .
On
  switching   on   the   ignition,   engine   running  
o

r the vehicle at a speed of up to 12 mph
(20
  km/h),   the   warning   lamp   A as well as the
corresponding
  points   in   the   indicator   B come
on for about thirty seconds, if one or more rear
passengers
  have   not   fastened   their   seat   belt.
Seat belts unfastened alert
Front seat belts not fastened
alert
On switching on the ignition, the warning lam p A comes on, as well as the
corresponding points
  in   the   indicator   B, if the
driver
  and/or   front   passenger   have   not   fastened  
t

heir   seat   belt. At
  speeds   above   12   mph   (20   km/h),   these  
a

lerts   flash,   accompanied   by   an   audible   signal  
f

or   two   minutes.   After   this   period,   these   alerts  
r

emain   on   fixed,   while   the   front   seat   belts   are  
n

ot   fastened.
On   switching   on   the   ignition,   the   warning  
lam

p

A remains on, as well as the
corresponding   points   in   the   indicator   B
, if the
driver   and/or   one   or   more   passengers   have   not  
f

astened   their   seat   belt.
At   speeds   above   12   mph   (20   km/h),   these  
a

lerts   flash,   accompanied   by   a   message   and  
a

n   audible   signal   for   two   minutes.   After   this  
p

eriod,   these   alerts   remain   on   fixed,   while   the  
s

eat   belts   are   not   fastened.
6
Safety