2016 Citroen C4 PICASSO reset

37
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Service indicator
System which informs the driver when the
next  service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vice
 s
chedule.
The point at which the service is due is
calculated from the last indicator zero reset,
according
  to   the   mileage   covered   and   the   time  
e

lapsed   since   the   last   service.
For
  BlueHDi   Diesel   versions,   depending   on   the  
c

ountry   of   sale,   the   degree   of   deterioration   of  
t

he   engine   oil   may   also   be   taken   into   account.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the spanner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   and   trip   distances.5
  seconds   after   the   ignition   is   switched   on,  
t

he distance recorder resumes its normal
operation.
 T

he spanner remains on to
indicate that a service must be carried out
soon.
Gauges and indicators
1
Instruments

39
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Resetting the service indicator
If you have to disconnect the battery
following  this   operation,   lock   the   vehicle  
a

nd wait at least 5 minutes for the reset
to
  be   registered.
After each service, the service indicator must
be
 
reset
 
to
 
zero.
If you have carried out the service on your
vehicle
 y

ourself:
F
 
s

witch
 
off
 
the
 
ignition,
F

p

ress and hold the trip distance recorder
reset button,
F
 
s

witch
 
o

n
 
t

he
 
i

gnition;
 
t

he
 
d

istance
 
r

ecorder
 
d

isplay
 
begins
 
a
 
countdown,
F

w

hen the display indicates "=0" , release
the
 
button;
 
the
 
spanner
 
disappears.
Retrieving the service
information
You can access the service information at any
time.
F
P
ress the trip distance recorder reset
button.
T

he service information is displayed for a
few
  seconds,   then   disappears.
1
Instruments

45
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Distance recorders
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
When
  travelling   abroad,   you   may  
h

ave   to   change   the   units   of   distance:  
t

he display of road speed must be in
the
  official   units   (miles   or   km)   for   the  
c

ountry.   The   change   of   units   is   done   via  
t

he   screen   configuration   menu,   with   the  
v

ehicle   stationary.
Trip distance recorder
It measures the distance travelled since it was
reset  to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Total distance recorder
It measures the total distance travelled by the
vehicle  since   its   first   registration.
1
Instruments

48
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Type 1 instrument panel
System that gives you information on the journey in progress (range, fuel consumption…).
Information display in the touch screen tablet
Permanent display:
F Sel ect the " Trip computer " in the
Applications
 

menu.
The trip computer information is displayed in
tabs.
F

P
ress one of the buttons to display the
desired
 t

ab. The
  current   fuel   consumption   tab   with:
-  
t
he   range,
-
t
he current fuel consumption,
-  
t
he   Stop   &   Start   time   counter.
The trip "1"
 
tab   with:
-
t
he distance travelled,
-  
t
he   average   fuel   consumption,
-  
t
he   average   speed,  
 
f
or   the   first   trip.
The trip "2"  tab   with:
-

t
he distance travelled,
-
 
t
he   average   fuel   consumption,
-
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When the desired trip is displayed, press the reset button or on the end of the wiper
control
  stalk.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
The information is accessible in the Driving
 

menu.
Temporary
 
display
 
in
 
a
 
new
 
window:
F
 
P

ress
 
the
 
end
 
of
 
the
 
wiper
 
control
 
stalk
 
for
 
a

ccess to the information and display the
different
 
tabs.
Instruments

49
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Type 2 instrument panel
Information display in the instrument panel
F Press the button on the end of the wiper control stalk to display the various tabs in
succession. -
 
T
he   current   information   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
- Trip
"1"
 w
ith:
●  
t
he   average   speed,
●  
t
he   average   fuel   consumption,
●  t he   distance   travelled, f
or   the   first   trip.
-
Trip "2"
 w

ith:
●
 
t
he   average   speed,
●
 
t
he   average   fuel   consumption,
●
 
t
he   distance   travelled,
 f

or   the   second   trip.
Trip reset
F When the trip required is displayed, press the control for more than two seconds
or use the left hand thumbwheel of the
steering
  mounted   controls.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
For
 
all
 
other
 
display
 
modes,
 
pressing
 
the
 
end
 
o

f
 
the
 
wiper
 
stalk
 
displays
 
this
 
information
 
in
 
a
 
n

ew
 
window.
The display of trip computer information is
permanent when you select the "Dials" or
"Personal"
 
display
 
mode.
1
Instruments

50
C4-Picasso-II_en_Chap01_instruments-bord_ed01-2016
Tr i p c o m p u t e r
Range
(miles or km)
T he distance which can still be
travelled
  with   the   fuel   remaining   in  
t

he   tank   (related   to   the   average   fuel  
c

onsumption over the last few miles
(kilometres)
 t

ravelled).
This
  value   may   vary   following   a   change  
i

n
 
the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
 
the
  range   falls   below   20   miles   (30   km),  
d

ashes
 
are   displayed.   After   filling   with   at   least  
5

 
litres
 
of
 
fuel,   the   range   is   recalculated   and   is  
d

isplayed
  when   it   exceeds   60   miles   (100   km).
If dashes are displayed continuously
while
  driving   in   place   of   the   digits,  
c

ontact a CITROËN dealer or a
qualified
 w

orkshop. This function is only displayed from
20 mph
  (30   km/h).
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip   reset.
Average speed
(mph or km/h)
C alculated   since   the   last   trip   reset.
Distance travelled
(miles or km)
C alculated   since   the   last   trip   reset.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I
f your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
A few definitions
Instruments

146
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument
panel  and   the   engine   goes   into   standby  
au

tomatically:
-

w
ith a manual gearbox , at speeds below
12
  mph   (20   km/h),   or   vehicle   stationary  
(

with   PureTech   130,   THP   165   and  
B

lueHDi 100, 115 and 120 versions), when
you
  place   the   gear   lever   in   neutral,   and   you  
r

elease the clutch pedal,
-

w
ith an automatic gearbox , with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres, STOP mode is not
available for a few seconds after
coming
  out   of   reverse   gear.
The Stop & Start system does not affect
the functionality of the vehicle, such as
for
  example,   braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(10
  km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   selected,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, this indicator lamp flashes
for  a   few   seconds   then   goes   off.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If your vehicle is fitted with the system, a time
counter calculates the sum of the periods in
STOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t
he
 
START/STOP
 
button.
Driving

150
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Speed limit recognition
This system allows the speed limit detected by
the camera to be displayed in the instrument
panel.
Specific speed limits, such as those for heavy
goods
  vehicles,   are   not   displayed.
The display of the speed limit in the instrument
panel
  is   updated   as   you   pass   a   speed   limit   sign  
i

ntended   for   cars   (light   vehicles).
The units for the speed limits (mph or
km/h)
  depend   on   the   country   you   are  
d

riving   in.
It
  should   be   taken   into   account   so   that  
y

ou   observe   the   speed   limit.
For the system to operate correctly
when
  you   change   country,   the   units   for  
s

peed in the instrument panel must be
those
  for   the   country   you   are   driving   in. The
  automatic   reading   of   road   signs   is   a  
d

riving   assistance   system   and   does   not  
a

lways   display   speed   limits   correctly.
The
  speed   limit   signs   present   on   the  
r

oad   always   take   priority   over   the  
d

isplay   by   the   system.
The system cannot in any
circumstances replace the need for
vigilance
  on   the   part   of   the   driver.
The
  driver   must   observe   the   driving  
r

egulations   and   must   adapt   the   speed  
o

f the vehicle to suit the weather and
traffic.
It is possible for the system to not
display the speed limit if it does not
detect
  a   speed   limit   sign   within   a   preset  
p

eriod.
The
  system   is   designed   to   detect   signs  
t

hat conform to the Vienna Convention
on
  road   signs.
To maintain correct operation of the
system:
  regularly   clean   the   area   in   front  
o

f   the   camera.Principles
Using a camera at the top of the windscreen, this system detects and reads speed limit and
end
  of   speed   limit   signs.
The
  system   also   takes   account   of   information  
o

n   speed   limits   from   the   navigation   system  
ma

pping.
Driving