2016 Citroen C4 PICASSO buttons

158
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn thumbwheel 1 to the "0" p osition. T
he display of information related to the
cruise
  control   disappears.
Switching on
Once the cruise control is switched on, you
can  modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F

b
y successive short presses, to modify
the
  speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F

T

urn thumbwheel 1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Pause
You can pause the cruise control at any time
by  pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

159
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Flashing of the dashes indicates a fault with the cruise   control.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating faultWhen the cruise control is switched on,
be careful if you maintain the pressure
on  one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
Do not use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On a steep descent, the cruise control
will not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
The use of mats not approved by
CITROËN may inter fere with the
operation
  of   the   cruise   control.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-

e
nsure that the mat is secured
c o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
4
Driving

162
C4-Picasso-II_en_Chap04_conduite_ed01-2016
1. Select  cruise   control   mode.
2. U se the current speed of the vehicle as
the
  cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
U

se the current speed of the vehicle as
the
  cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
D

isplay the list of memorised speeds, or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
S

elect the inter-vehicle distance (" Close",
" Normal ", "Distant ")
For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Steering mounted controls
Switching on
The active cruise control must be selected in
the Driving  menu.
F

T
urn the thumbwheel 1 to the " CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed of your vehicle becomes the cruise
speed
  setting.
The
  cruise   control   is   activated   (ON).
By default, the inter-vehicle time is set at
2 seconds.
Other wise, the last speed value set will be used
for
  operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F b y successive short presses, to modify
by
  steps   of   +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed in the touch screen tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As a precaution, it is recommended that
you
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Driving

166
C4-Picasso-II_en_Chap04_conduite_ed01-2016
In the event of a fault with the dynamic cruise
control,  you   are   alerted   by   an   audible   signal  
a

nd   the   display   of   the   message   "Driving   aid  
f

unctions
 f
ault".
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop. When
  the   cruise   control   is   working,   take  
c

are   if   making   a   maintained   press   on  
o

ne   of   the   cruise   control   programmed  
s

peed   modification   buttons:   this   can  
l

ead   to   a   very   quick   change   in   the  
s

peed   of   your   vehicle.
Do not use the dynamic cruise control
on
  slippery   sur faces   or   in   heavy   traffic.
When
  descending   a   steep   hill,   the  
c

ruise control may not be able to
prevent
  the   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
When
  ascending   a   steep   hill   or   when  
t

owing,   it   might   not   be   possible   to   attain  
o

r   maintain   the   programmed   speed.
Operating fault
The operation of the radar, located in
the front bumper, may be disturbed by
accumulations  of   grime   (dust,   mud...)  
o

r in certain weather conditions (snow,
ice...).
The
  message   "SYSTEM   INACTIVE:  
V

isibility   reduced"   is   displayed   to   signal  
t

hat the system has been put into
st a n dby.
Clean
  the   front   bumper   regularly.
The use of mats not approved by
CITROËN may inter fere with the
operation
 
of
 
the
 
cruise
 
control.
To
 
avoid
 
any
 
risk
 
of
 
jamming
 
the
 
pedals:
-

e

nsure that mats are secured
c o r r e c t l y,
-
 
n

ever
 
fit
 
one
 
mat
 
on
 
top
 
of
 
another.
Driving

169
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Switching on
The cruise control is switched on manually,
it requires a vehicle speed of between 18 and
112 mph
  (30   and   180   km/h).
An
  automatic   gearbox   must   be   in   position   D
or M . Other wise,
  the   last   setting   made   will   be   used  
w

hen   switching   on   the   system.
Switching   off   the   ignition   cancels   any  
p

rogrammed   speed   setting.
When   the   cruise   control   is   operating,  S
top & Start is automatically
deactivated.
Pause
The dynamic cruise control can be paused
manually b y:
-
 
a
ction   by   the   driver:
●
 
o
n   button   4,
●
 
o
n   the   brake   pedal,
●
 
o
n   the   electric   parking   brake   control,
●
 
w
hen   changing   from   D to N with an
automatic
  gearbox.
-

o
r automatically, if operation of the ESC
system
  is   triggered   for   reasons   of   safety.
Following
  braking   of   the   vehicle  
b

ringing   it   to   a   complete   stop,   the  
s

ystem   holds   the   vehicle   stationary   ;  
t

he   cruise   control   is   paused.   The   driver  
s

hould press the accelerator pedal to
move off, then reactivate the system
by
  exceeding   18   mph   (30   km/h)   and  
p

ressing   button   2, 3 or 4 .
If
  the   driver   takes   no   action   following  
t

his   immobilisation,   the   electric   parking  
b

rake   is   applied   automatically   after   a  
f

ew
 m
inutes.
F
 
W

ith
 
the
 
ignition
 
on,
 
turn
 
the
 
thumbwheel 1
to the " CRUISE "
 
position:
 
cruise
 
control
 
m

ode
 
is
 
selected,
 
but
 
not
 
started
 
(grey).
F
 
V

ehicle
 
moving,
 
press
 
one
 
of
 
the
 
buttons 2
or 3 :
 
the
 
current
 
speed
 
of
 
your
 
vehicle
 
b

ecomes
 
the
 
cruise
 
speed
 
setting.
The
 
cruise
 
control
 
is
 
activated
 
(green).
By default, the inter-vehicle distance is set at
" Normal "
 
(2
 
dashes).
4
Driving

2
FM/87.5 MHz
87.5MHz
12:13
18,5 21,5
23 °C
Audio and Telematics
First steps
With the engine running, a press mutes the sound. With the ignition off, a press turns the system on.
Volume.
Use the buttons either side of or below the touch screen for access to the menus, then press the virtual buttons in the touch screen. All of the touch areas of the screen are white. Press the cross to go back a level. Press "OK" to confirm.
The touch screen is of the "capacitive" type. To clean the screen, use a soft, non-abrasive cloth (spectacles cloth) with no additional product. Do not use sharp objects on the screen. Do not touch the screen with wet hands.

5
.
Audio and Telematics
Steering mounted controls
Media (short press): change the multimedia source. Telephone (short press): call. Call in progress (short press): access to telephone menu. Telephone (long press): reject an incoming call, end call, access to telephone menu.
Decrease volume.
Voice commands : Short press, system voice commands. Long press, smartphone voice commands via the system. Mute / Restore the sound. Or Mute by pressing the volume
increase and decrease buttons simultaneously. Restore the sound by pressing one of the two volume buttons.
Radio (rotate): automatic search for the previous / next station. Media (rotate): previous / next track, move in a list. Short press : confirm a selection; other than selection, access to presets.
Radio : display the list of stations. Media : display the list of tracks. Radio (press and hold): update the list of stations received.
Increase volume.

15
.
Audio and Telematics
Level 1Level 2Level 3Comments
Navigation Select the orientation of the map; north up, vehicle direction up or perspective.
Navigation Display the traffic information available.
Navigation
World map Manually locate an area on the world map or enter the latitude and longitude coordinates.
Around the vehicle
Display the location criteria selected. Around home
Around the destination
2D mode Switch to a 2D map.
Zoom out / zoom in using the touch buttons or with two fingers on the screen.
Start navigation to the current address.
Save the current address.
Zoom out / zoom in using the touch buttons or with two fingers on the screen.