2016 Citroen C4 CACTUS Air con

122
Starting
The parking brake must be applied.
F
 
W

ith
 
a   manual   gearbox,   place   the   gear  
l

ever
 
in   neutral   then   depress   the   clutch  
p

edal
 f
ully.
F
 
W

ith
 
an   electronic   gearbox,   place   the  
c

ontrol at N   then   press   the   brake   pedal  
f

i r m l y.
F
 
I

nsert
  the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code.
F
 
U

nlock   the   steering   column   by   simultaneously
 t

urning   the   steering   and   the   key.
In
 
certain   cases,   you   may   have   to   apply  
m

ore   force   to   the   steering   (wheels   on  
f

ull
  lock,   for   example).
F
 
W

ith
 
a   petrol   engine,   operate   the   starter  
m

otor
  by   turning   the   key   to   position 3
without
  pressing   the   accelerator   pedal,  
u

ntil
 
the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key.
Starting-switching off the engine
It has 3 positions:
-  p osition   1 (Stop):
  insert   and   removing  
the
  key,
-
 
p
osition   2 (Ignition on) :
  steering   column  
u

nlocked,   ignition   on,   Diesel   preheating,  
e

ngine
 r
unning,
-
 
p
osition   3 (Starting).
Ignition switch
Switching off the engine leads to a loss o
f   braking   assistance.
Ignition on position (2)
It allows the use of the vehicle's electric equipment   or   portable   devices   to   be   charged.
Once
  the   state   of   charge   of   the   battery   drops  
t

o   the   reserve   level,   the   system   switches   to  
e

nergy   economy   mode:   the   power   supply   is  
c

ut   off   automatically   to   preserve   the   remaining  
b

attery   charge.
Avoid
  attaching   heavy   objects   to   the  
k

ey,   which   would   weigh   down   on   its  
b

lade   in   the   ignition   switch   and   could  
c

ause   a   malfunction.
It
  could   adversely   affect   the   deployment  
o

f   the   front   airbag.
Driving

151
Under-inflation detection
The system monitors the pressures in the four t
yres,   once   the   vehicle   is   moving.
It
  compares   the   information   given   by   the   four  
w

heel   speed   sensors   with   reference values,
which must be reinitialised ever y time the
tyre pressures are adjusted or a wheel
changed .
The
  system   triggers   an   alert   as   soon   as   it  
d

etects   a   drop   in   the   inflation   pressure   of   one  
o

r   more   tyres. The
  under-inflation   detection   system  
d

oes   not   replace   the   need   for   vigilance  
o

n   the   part   of   the   driver.
This
  system   does   not   avoid   the   need   to  
c

heck   the   tyre   pressures   (including   the  
s

pare   wheel)   every   month   as   well   as  
b

efore   a   long   journey.
Driving
  with   under-inflated   tyres   impairs  
r

oad   holding,   extends   braking   distances  
a

nd   causes   premature   tyre   wear,  
p

articularly   under   arduous   condition  
(

high   loading,   high   speed,   long   journey).
System
  which   automatically   checks   the   pressures   of   the   tyres   while   driving.
The   inflation   pressures   defined   for  
y

our   vehicle   can   be   found   on   the   tyre  
p

ressure   label.
For
  more   information   on   the  
i

dentification   markings,   refer   to   the  
c

orresponding
 s
ection.
Tyre
  pressures   should   be   checked  
w

hen   the   tyres   are   "cold"   (vehicle  
s

topped   for   1   hour   or   after   a   journey   of  
l

ess   than   6   miles   (10   km)   at   moderate  
s

peeds).
Other wise
  (when   hot),   add   0.3   bar   to  
t

he   pressures   shown   on   the   label.
Driving
  with   under-inflated   tyres  
i

ncreases   fuel   consumption.
6
Driving

161
Load reduction mode
System which manages the use of certain functions   according   to   the   level   of   charge  
r

emaining   in   the   battery.
When
  the   vehicle   is   being   driven,   the   load  
r

eduction   function   temporarily   deactivates  
c

ertain   functions,   such   as   the   air   conditioning,  
t

he   heated   rear   screen...
The
  deactivated   functions   are   reactivated  
a

utomatically   as   soon   as   conditions   permit.System
  which   manages   the   duration   of   use   of  c
ertain functions to conserve a sufficient level
of
  charge   in   the   battery.
After
  the   engine   has   stopped,   you   can  
s

till   use   functions   such   as   the   audio   and  
t

elematics   system, windscreen   wipers,   dipped  
b

eam   headlamps, courtesy   lamps,   etc.   for  
a

  maximum   combined   duration   of   about  
f

orty minutes.
Energy economy mode
Switching to economy mode
A message then appears in the instrument p
anel   screen   indicating   that   the   vehicle   has  
s

witched   to   economy   mode   and   the   active  
f

unctions   are   put   on   standby.
If
  a   telephone   call   is   being   made   at   this   time,   it  
w

ill   be   maintained   for   around   10   minutes   with  
t

he   Bluetooth   hands-free   system   of   your   audio  
s

ystem.
Exiting economy mode
These functions are reactivated automatically n ext   time   the   vehicle   is   driven.
In
  order   to   restore   the   use   of   these   functions  
i

mmediately,   start   the   engine   and   let   it   run:
-
 
f
or   less   than   ten   minutes,   to   use   the  
e

quipment   for   approximately   five   minutes,
-
 
f
or   more   than   ten   minutes,   to   use   the  
e

quipment   for   up   to   approximately  
t

hirty minutes.
Let
  the   engine   run   for   the   duration   specified   to  
e

nsure   that   the   battery   charge   is   sufficient.
Do
  not   repeatedly   and   continuously   restart   the  
e

ngine   in   order   to   charge   the   battery.
A
  flat   battery   prevents   the   engine   from  
s

tarting.
For
  more   information   on   the   battery,  
r

efer   to   the   corresponding   section.
7
Practical information

174
Checks
12 V battery
The battery does not require any maintenance.
H owever,   check   regularly   that   the   terminals  
a

re   correctly   tightened   (versions   without   quick  
r

elease   terminals)   and   that   the   connections  
a

re   clean.Refer to the manufacturer's service   schedule   for   details   of   the  
r

eplacement   intervals   for   these  
c

omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
Oil filter
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise,   have   them   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
Depending
  on   the   environment   (e.g.   dusty  
a

tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.
Particle filter (Diesel)
The start of saturation of the
particle  filter   is   indicated   by   the  
f

ixed   illumination   of   this   warning  
l

amp   accompanied   by   a   warning  
m

essage.
As
 
soon
 
as
  the   traffic   conditions   permit,  
r

egenerate
 
the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph   (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   this   indicates   a  
l

ow
 
additive   level.
Refer
 
to
 
the   "Diesel   additive   level"   section.
On a new vehicle, the first particle
filter
 
regeneration   operations   may   be  
a

ccompanied   by   a   "burning"   smell,  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle   at   very   low   speed   or   at   idle,  
y

ou
 
may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he
 
exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
 
the   environment.
When
 
carrying
 
out
 
any
 
operation
 
on
 
the
 
12
 
V
 
b

attery,
 
refer
 
to
 
the
 
corresponding
 
section
 
for
 
d

etails
 
of
 
the
 
precautions
 
to
 
be
 
taken
 
before
 
s

tarting
 
work.
Versions
 
equipped
 
with
 
Stop
 
&
 
Start
 
are
 
f

itted
 
with
 
a
 
12
 
V
 
lead-acid
 
battery
 
of
 
s

pecific
 t

echnology
 a

nd
 s

pecification.
Its
 
replacement
 
should
 
be
 
carried
 
out
 
o

nly
 

by
 

a
 

CITROËN
 

dealer
 

or
 

a
 

qualified
 w

orkshop.
Practical information

186
The tyre inflation pressures are given on this label.
This
 
k

it
 
i

s
 
i

nstalled
 
i

n
 
t

he
 
s

torage
 
b

ox,
 
u

nder
 
t

he
 
b

oot
 
floor.
This
 
kit
 
consists
 
of
 
a
 
compressor
 
and
 
a
 
sealant
 
c

artridge.
It allows the temporary repair
 

of
 
a
 
tyre.
You
 
are
 
then
 
able
 
to
 
go
 
to
 
the
 
nearest
 
garage.
It
 
is
 
designed
 
to
 
repair
 
most
 
punctures
 
which
 
c

ould
 
affect
 
the
 
tyre,
 
located
 
on
 
the
 
tyre
 
tread
 
o

r
 
shoulder.
Its
 
compressor
 
can
 
be
 
used
 
to
 
check
 
and
 
a

djust
 
the
 
pressure
 
of
 
the
 
tyre.
Temporary pu
ncture r epair k it
Access to the kit
List of tools
These tools are specific to your vehicle and can v
ary   according   to   equipment.   Do   not   use   them  
f

or   other   purposes.
1.
 1

2   V   compressor.
 C

ontains   a   sealant   cartridge   for   the  
t

emporary   repair   of   a   tyre   and   can   also   be  
u

sed   for   adjusting   tyre   pressures.
2.
 T

owing   eye.
For
  more   information   on   towing   refer   to   the  
c

orresponding
 s
ection.
In the event of a breakdown

189
F Switch  on   the   compressor   by   moving  t
he switch B to position "I" until the tyre
pressure
  reaches   2.0   bars.
 T

he   sealant   is   injected   into   the   tyre   under  
p

ressure;   do   not   disconnect   the   pipe   from  
t

he   valve   during   this   operation   (risk   of  
sp

lashing).
If
  after   around   5   to   7   minutes   the  
p

ressure   is   not   attained,   this   indicates  
t

hat   the   tyre   is   not   repairable;   contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   assistance. F
 R emove   the   kit   and   screw   the   cap   back   on  t
he   white   pipe.
 T

ake   care   to   avoid   staining   your   vehicle  
w

ith   traces   of   fluid.   Keep   the   kit   to   hand.
F
 
D
rive   immediately   for   approximately  
t

hree   miles   (five   kilometres),   at   reduced  
s

peed   (between   15   and   35   mph   (20   and  
6

0 km/h)),   to   plug   the   puncture.
F
 
S
top   to   check   the   repair   and   the   tyre  
p

ressure   using   the   kit.
Tyre under-inflation detection
After repair of the tyre, the warning lamp   will   remain   on   until   the   system   is  
r

einitialised.
For
  more   information   on   under-inflation  
d

etection,   refer   to   the   corresponding  
s

ection.
2. Inflation
F Turn the selector A to the "Air" position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
v

alve   of   the   wheel.
8
In the event of a breakdown

196
Fitting a wheel
Fitting the spare wheel
If your vehicle is fitted with alloy wheels, when   tightening   the   bolts   on   fitting,   it   is  
n

ormal  
t
o  
n
otice  
t
hat  
t
he  
w
ashers  
d
o  
n
ot  
c

ome   into   contact   with   the   spare   wheel.  
T

he   wheel   is   secured   by   the   conical  
s

ur face   of   each   bolt.
After changing a wheel
Have the tightening of the bolts and the pressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have
  the   punctured   wheel   repaired  
a

nd   refitted   to   the   vehicle   as   soon   as  
p

ossible.
F
 
R

emove
 
the
 
bolts
 
and
 
store
 
them
 
in
 
a
 
clean
 
p

lace.
F
 R
emove
 
the
 
wheel.
In the event of a breakdown

207
CITROËN will not accept responsibility
for  the   cost   incurred   in   repairing   your  
v

ehicle   or   for   rectifying   malfunctions  
r

esulting   from   the   installation   of  
a

ccessories   not   supplied   and   not  
r

ecommended   by   CITROËN   and  
n

ot   installed   in   accordance   with   its  
in

structions, in particular when the
combined
  consumption   of   all   of   the  
a

dditional   equipment   connected  
e

xceeds
 1
0
 mil
liamperes.
Installing electrical
accessories
Your vehicle's electrical system is designed   to   operate   with   standard   or  
o

ptional
 e
quipment.
Before
  installing   other   electrical  
e

quipment   or   accessories   on   your  
v

ehicle,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
8
In the event of a breakdown