2016 Citroen C1 RHD Owner's Manual

199
Press on "Audio source "   to   display  t
he   carousel   of   audio   sources.
Select the " USB"
  auxiliary   source.
Select the " A/V"
  auxiliary   source.
Use
 
the
 
play   settings   at   the   bottom   of   the  
sc

reen.
Selection of source
OR Pressing   the   "
MODE " button at the
steering   mounted   controls   changes   to  
t

he   next   media,   available   if   the   source  
i

s   active.
.
Audio and Telematics

200
Information and advice
The system accepts USB mass storage devices o r A pple® players via the
USB
 
ports.
 
The
 
adaptor   cable   is   not  
sup

plied.
Control
 
of
 
the
 
peripheral   device   is   with  
t

he
 
audio
 
system
 
controls.
Other
 
peripherals,   not   recognised   on  
c

onnection,
 
must
  be   connected   to   the  
a

uxiliary
 
socket
 
using   a   Jack   cable  
(

not supplied).
It
 
is
 
advisable
 
to
 
restrict
 
file
 
names
 
to
 
2

0 characters,
 
without
 
using
 
of
 
special
 
c

haracters
 
(e.g.:
 
"
 
"
 
?
 
;
 
ù)
 
to
 
avoid
 
any
 
playing
 
a

nd
 d

isplaying
 pro

blems.
Use
 
only
 
USB
 
memory
 
sticks
 
formatted
 
FAT32
 
(

File
 
Allocation
 
Table).
The
 
audio
 
system
 
plays
 
files
 
with
 
the
 
extension:
".wma",
 
type
 
Ver7
 
and
 
Ver8
 
with
 
bit
 
rate
 b
etween
 
48
 
and
 
192
 
Kbps
 
and
 
type
 
Ver9
 
with
 
b

it
 
rate
 
between
 
48
 
and
 
320
 
Kbps.
".aac",
 
with
 
bit
 
rate
 
between
 
16
 
and
 
320
 
Kbps.
".mp3
 
-
 
MPEG1"
 
with
 
bit
 
rate
 
between
 
32
 
and
 
3

20
 
Kbps
 
and
 
".mp3
 
-
 
MPEG2"
 
with
 
bit
 
rate
 
b

etween
 
8
 
and
 
160
 
Kbps.
The
 
sampling
 
rates
 
supported
 
are
 
11,
 
22,
 
44
 
a

nd
 
48
 
KHz. The
 
system
 
can
 
alternatively   read   files  
v

ia the Bluetooth
® system and the USB po
rt.
It
 
is
 
recommended   that   the   USB   cable  
f

or
 
the
 
portable
 
device   is   used.
Audio and Telematics

201
Audio streaming
Once connected for streaming, the telephone   is   considered   as   a   media  
s

ource.
It
  is   recommended   that   "Repeat "
  mode  
b

e   activated   in   the   Bluetooth   device.
Streaming
  allows   audio   files   on   your  
t

elephone   to   be   played   via   the   vehicle's  
s

peakers.
Connect   the   telephone:   see   the   "
Telephone "
section, then " Bluetooth".
Choose either " Connect all" or " Connect as
audio player "
 pro
file.
If
 
play
  does   not   start   automatically,   it   may  
b

e
 
necessary   to   start   audio   play   from   the  
t

elephone.
Control   is   from   the   peripheral   device   or   by  
u

sing
 
the   audio   system   controls.
Connecting Apple® players
Connect the Apple® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system. The
  version   of   software   in   the   audio  
s

ystem   may   not   be   compatible   with   the  
g

eneration   of   your   Apple
® player.
T
he classifications available are those
of
 
the
 
portable
 
device
 
connected  
(

artists
 
/
 
albums
 
/
 
genres
 
/   tracks   /  
p

laylists
 
/
 
a

udio
 
books /
 
podcasts).
The
 
default
 
classification
 
used   is   by  
a

rtist.
 
To
 
modify
 
the
 
classification   used,  
r

eturn
 
to
 
the
 
first
 
level
 
of
 
the   menu  
t

hen
 
select
 
the
 
desired
 
classification  
(

playlists
 
for
 
example)
 
and   confirm   to   go  
d

own
 
through
 
the
 
menu
 
to   the   desired  
t

rack.
.
Audio and Telematics

202
Telephone
Level 1Level 2Level 3
Audio and Telematics

203
Level 1Level 2 Level 3 Comment
Contacts
After
  making   choices,   start   the   call.
Favourites
Call history
Enter a number Call Enter
  a   number   then   start   the   call.
Telephone/ message
configuration Connect the
telephone
Telephone
Select the services to use on the
peripheral
 d

evice.
Audio
  player
Sounds
configuration Ringtone
Choose
  settings,   activate   or  
d

eactivate
 o
ptions.
Ringtone
  volume
Incoming
  SMS/MMS   tone
Incoming
  SMS/MMS   volume
Incoming
  e-mail   tone
Incoming
  e-mail   volume
Incoming
  call   volume
Contacts/
call histor y
configuration Automatic
  transfer
Update
  telephone   contacts
Sort contacts by
Add
  favourite
Remove
  favourite
Message
configuration Display
  of   incoming   calls
Contacts/call
  history   transfer   state
Telephone
display
configuration Display
  of   incoming   calls
Contacts/call
  history   transfer   state
.
Audio and Telematics

204
Press on "Audio source "   to   display  t
he   carousel   of   audio   sources.
Select " Bluetooth audio ".
Select " Bluetooth configuration "
Activate
 
the   telephone's   Bluetooth   function  
a

nd
 
ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration).
Select  the   telephone   in   the   list.
Select "
Connect telephone ".
Select the "
Telephone/message
configuration "   tab.
Select   your   choice.
Select the " Add"
  tab   in   the   system. Press "
OK"
  to   confirm.
If the telephone is not detected, it is recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
As a safety measure and because they require   prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Pairing a Bluetooth® telephone
A waiting screen is displayed with the B
luetooth   settings   of   the   system   and   a   default  
B

luetooth PIN.
Once
  detected,   select   the   name   of   the   system  
i

n   your   telephone.
The
  system   displays   that   the   services   to   be  
u

sed   on   the   telephone   are:   "Telephone "
  and  
"A

udio player ".
The
  system   offers   to   connect   the   telephone:
-
 
w
ith   "Connect all",
-
 
w
ith   "Connect as telephone "
  (hands-free  
k

it,   telephone   only),
-
 
w
ith   "Connect as audio player "
(streaming:
  wireless   play   of   audio   files   on  
t

he
 t
elephone).
Enter
  the   PIN   code   in   the   telephone   then   accept
 t

he   connection   (depending   on   the   telephone).To
  change   the   connection   choice,  Sel
ect "Telephone ".
Audio and Telematics

205
The services available depend on the   network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  profiles   compatible   with   the   system  
a

re:   HFP,   OPP,   PBAP,   A2DP,   AVRCP,  
M

A P. This function allows the connection or
disconnection
  of   a   peripheral   device   as  
w

ell   as   the   deletion   of   a   pairing.
Automatic reconnection
When the ignition is switched on, the last telephone   connected   when   the   ignition   was  
s

witched   off   reconnects   automatically,   if   this  
c

onnection   made   had   been   activated   during   the  
p

airing   procedure   (see   previous   pages).
Connection
  is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Managing paired
telephones
Press "Telephone ".
Select " Telephone/message
configuration ".
Select " Connect telephone " to
display
  the   list   of   paired   devices.
Select " Remove "
  then   select   the   device   in   the  
l

ist
 
and
 
confirm.
.
Audio and Telematics

206
Make a short press on this steering mounted   button   to   accept   an  
inc

oming
 c
all.
Press
  on   this   steering   mounted  
b

utton   to   reject   a   call   or   to   end   a   call.Press on "Telephone ".
Press
  the   keypad   tab.
Enter
  the   phone   number   using   the  
k

eypad   then   press   the   telephone  
b

utton   to   start   the   call.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Making a call
Use of the telephone is not
recommended  while   driving.   We  
r

ecommended   that   you   park   safely  
o

r   make   use   of   the   steering   mounted  
c

ontrols.
Calling a new number
Press on " Telephone ".
Press   this   steering   mounted   button   to  
o

pen   the   list   of   contacts.
OR
Select the " Contacts"
  tab.
Select
  the   desired   contact  
f

rom   the   list   offered   to   start  
t

he   call.
Calling a contact
Audio and Telematics