2016 Citroen C1 RHD Owner's Manual

103
Headlamp beam 
h
eight
 ad
justment
To avoid causing a nuisance to other road u
sers,   the   height   of   the   headlamp   beams  
s

hould   be   adjusted   according   to   the   load   in   the  
v

ehicle.
0.
 D

river   only.
0.5.
 D

river   +   front   passenger.
1.5 .
 
4
  people.
3.
 4

  people   +   maximum   authorised   load.
3.5.
 D

river   +   maximum   authorised   load.
The
  initial   setting   is   position   "0".
Direction indicators
F Left:   lower   the   lighting   stalk   passing   the  p
oint   of   resistance.
F
 
R
ight:   raise   the   lighting   stalk   passing   the  
p

oint   of   resistance.
Three flashes of the direction
indicators
F Press  briefly   upwards   or   downwards,  w
ithout   going   beyond   the   point   of  
r

esistance;   the   direction   indicators   will  
f

lash   3   times.
5
Lighting and visibility

104
Wiper control stalk
Manual controls
The wipers are controlled directly by the driver.
Windscreen wipers
Wiping speed control stalk: raise or lower the stalk   to   the   desired   position.
Single
  wipe.
Park.
Intermittent
  wipe.
Normal
  wipe   (moderate   rain).
Fast
  wipe   (heavy   rain).
Do
 
not
 
operate
 
the
 
wipers
 
on
 
a
 
dry
 
w

indscreen.
 
Under
 
extremely
 
hot
 
or
 
c

old
 
conditions,
 
ensure
 
that
 
the
 
wiper
 
b

lades
 
are
 
not
 
stuck
 
to
 
the
 
windscreen
 
b

efore
 
operating
 
the
 
wipers.
In
 
wintry
 
conditions,
 
remove
 
snow,
 
ice
 
o

r
 
frost
 
present
 
on
 
the
 
windscreen,
 a
round
 
the
 
wiper
 
arms
 
and
 
blades
 
and
 t
he
 
windscreen
 
seal,
 
before
 
operating
 
t

he
 
wipers.
For
  a   single   wipe   of   the   windscreen,   raise   and  
r

elease   the   control   stalk.
Lighting and visibility

105
Rear wiperRear screenwash
Wiper off, turn the control stalk towards you to o
perate   the   rear   screenwash,   accompanied   by  
s

everal   sweeps   of   the   rear   wiper.
Windscreen wash
Turn the ring to this position for a steady   wipe.
Pushing
 
the   stalk   away   from   you   operates   the  
w

ash
 
during   wiping.
Pull
 
the
 
wiper
 
stalk
 
towards
 
you.
 T
he windscreen
 
wash,
 
then
 
the
 
windscreen
 
w

ipers,
 
operate
 
for
 
a
 
pre-determined
 
time.
Do not use the front or rear screenwash
when the screenwash reservoir is
empty.
  You   risk   damaging   the   pump.
5
Lighting and visibility

106
Horn
Audible warning to alert other road users to an imminent d anger.
When
  manoeuvring   the   vehicle,  
t

ake   care   not   to   operate   the   horn  
u

nintentionally.
F
 
P
ress   one   of   the   steering   wheel   spokes.F
 
P
ress   the   central   part   of   the   steering  
w

heel.
Hazard warning lamps
Visual warning with of all the direction i
ndicators   flashing   to   alert   other   road   users   to   a  
v

ehicle   breakdown,   towing   or   accident.
F
 
P
ress   this   button,   all   of   the   direction  
in

dicators
 f
lash.
They
  can   operate   with   the   ignition   off.
Safety

107
Electronic Stability Control (ESC) incorporating the   following   systems:
-
 
a
nti-lock   braking   system   (ABS)   and   the  
e

lectronic   brake   force   distribution   (EBFD),
-
 em

ergency
 b
raking
 a
ssistance,
-
 
t
raction   control   (TRC),
-
 
d
ynamic   stability   control   (DSC).
Electronic stability control (ESC)
Definitions
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
These systems improve the stability and manoeuvrability   of   your   vehicle   when   braking  
a

nd   contribute   towards   better   control   in  
c

orners,   in   particular   on   poor   or   slippery   road  
su

rfaces.
The
  ABS   prevents   wheel   lock   in   the   event   of  
em

ergency
 b
raking.
The
  electronic   brake   force   distribution   system  
m

anages   the   braking   pressure   wheel   by   wheel.
Emergency braking assistance
In an emergency, this system enables you to reach   the   optimum   braking   pressure   more  
q

uickly   and   therefore   reduce   the   stopping  
di

stance.
It
  is   triggered   according   to   the   speed   at   which  
t

he   brake   pedal   is   pressed.   This   is   felt   by   a  
r

eduction   in   the   resistance   of   the   pedal   and   an  
i

ncrease   in   the   effectiveness   of   the   braking.
Traction control (TRC)
This system optimises traction in order to limit wheel   slip   by   acting   on   the   brakes   of   the   driving  
w

heels   and   on   the   engine.   It   also   improves  
t

he   directional   stability   of   the   vehicle   on  
a

cceleration.
Dynamic stability control (DSC)
If there is a difference between the path followed   by   the   vehicle   and   that   required   by   the  
d

river,   this   system   monitors   each   wheel   and  
a

utomatically   acts   on   the   brake   of   one   or   more  
w

heels   and   on   the   engine   to   return   the   vehicle  
t

o   the   required   path,   within   the   limits   of   the   laws  
o

f   physics.
6
Safety

108
Illumination of this warning lamp, accompanied   by   an   audible   signal,  
i

ndicates   that   there   is   a   fault   with   the  
e

lectronic   brake   force   distribution  
(

EBFD),   which   could   cause   loss   of  
c

ontrol   of   the   vehicle   when   braking.
Operation
Illumination of this warning lamp, accompanied   by   an   audible   signal,  
i

ndicates   that   there   is   a   fault   with  
t

he   ABS   system,   which   could   cause  
l

oss of control of the vehicle when
braking.
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)When changing  w heels  ( tyres  a nd  r ims),  m
ake   sure   that   these   are   approved   for  
y

our   vehicle.
Normal
  operation   of   the   ABS   may   make  
i

tself   felt   by   slight   vibration   of   the   brake  
ped

al.
In emergency braking, press
very firmly without releasing
the


pressure.
Yo u must
 

stop
 
as
 
soon
 
as
 
it
 
is
 
safe
 
to
 
do
 
so.
Contact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
w

orkshop
 
as
 
soon
 
as
 
possible.
Dynamic stability control (DSC)
and traction control (TRC)
Activation
These systems are activated automatically e ach   time   the   vehicle   is   started.
As
  soon   as   they   detect   a   problem   of   grip   or  
t

rajectory,   these   systems   act   on   the   operation   if  
t

he   engine   and   brakes.
Activation
  of   the   DSC   system   is
 s

ignalled   by   the   flashing   of   this
 i

ndicator   lamp   in   the   instrument   panel,
 a

ccompanied   by   an   audible   signal.
Activation
  of   the   TRC   system   is
 s

ignalled   by   the   flashing   of   this
 i

ndicator   lamp   in   the   instrument   panel.
Drive
 
carefully
 
at
 
reduced
 
speed,
 
and
 
contact
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Safety

109
The TRC and DSC systems offer increased   safety   in   normal   driving,   but  
s

hould   not   encourage   the   driver   to   take  
e

xtra   risks   or   drive   at   high   speed.
The correct operation of these
systems
  depends   on   observation   of  
t

he
 ma
nufacturer's
 r
ecommendations
 r

egarding   the   wheels   (tyres   and   rims),  
t

he   braking   components,   the   electronic  
c

omponents   and   the   assembly   and  
r

epair   procedures   used   by   CITROËN  
d

ealers.
After
  an   impact,   have   the   system  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate   the  
D

SC   and   TRC   systems,   so   that   the   wheels   can  
s

pin   freely   and   regain   grip.
Operating fault
However, it is recommended that these systems   be   reactivated   as   soon   as   possible.
F
 
P
ress   this   button   briefly.
This
  warning   lamp   comes   on:   the  
T

RC   system   no   longer   acts   on   the  
o

peration   of   the   engine.
Reactivation
The TRC and DSC control systems are reactivated   automatically   every   time   the   engine  
i

s   started. F
 
P
ress   the   button   again   to  
r

eactivate   it   manually. Illumination
  of   this   warning   lamp,  a
ccompanied   by   an   audible   signal,  
i

ndicates   a   fault   with   the   system.
Drive
  carefully   at   reduced   speed   and   contact  
a

  CITROËN   dealer   or   a   qualified   workshop   to  
h

ave   the   system   checked.
Deactivation of the TRC system only
Deactivation of the TRC and DSC systems F

V

ehicle stationary , press this
button
 
for
 
at
 
least
 
than
 
3
 
seconds.
These
 
warning
 
lamps
 
come
 
o

n:
 
the
 
TRC
 
and
 
DSC
 
s

ystems
 
no
 
longer
 
act
 
on
 
t

he
 
operation
 
of
 
the
 
engine. When
  the   TRC   system   only   is   deactivated,   it   is  
r

eactivated   as   the   vehicle's   speed   increases.
When
  both   the   TRC   and   DSC   systems   are  
d

eactivated,   they   do   not   reactivate   themselves  
e

ven   if   the   speed   of   the   vehicle   increases.
6
Safety

110
Active City Brake
Active City B rake  i s  a  d riving  a ssistance  s ystem  t
hat   aims   to   avoid   a   frontal   collision   or   reduce  
t

he   speed   of   an   impact   if   the   driver   does   not  
r

eact   or   reacts   too   late   (brake   application   too  
l

ate). This
  system   is   designed   to   improve  
d

riving   safety.
It
  remains   the   driver's   responsibility   to  
c

ontinuously   monitor   the   state   of   the  
t

raffic   and   to   assess   the   distances   and  
r

elative   speeds   of   other   vehicles.
Active
  City   Brake   can   in   no  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
Never
  look   at   the   laser   sensor   through  
a

n   optical   instrument   (magnifying   glass,  
m

icroscope...)   at   a   distance   of   less   than  
1

0   centimetres:   risk   of   eye   injury.Automatic
  braking   occurs   later   than   if  
d

one   by   the   driver,   so   as   to   intervene  
o

nly   when   there   is   a   high   risk   of  
c

ollision.Principle
Using a laser sensor and a camera located at the   top   of   the   windscreen,   this   system   detects  
a

  vehicle   running   in   the   same   direction   or  
s

tationary   ahead   of   your   vehicle.
When
  necessary,   the   vehicle's   braking   system  
i

s   operated   automatically   to   reduce   the   speed  
o

f   impact   or   to   help   avoid   a   collision   with   the  
v

ehicle
 a
head.
Conditions for activation
Active City Brake only operates if the following
c onditions   are   met:
●
 
t
he   engine   is   running,
●
 
t
he   vehicle   is   in   a   for ward   gear,
●
 
t
o   trigger the pre-collision alert :
-
 
t
he   speed   is   between   9   and   87   mph  
(

15 and   140   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   9   mph   (15   km/h),
●
 
f
or   braking assistance :
-
 
t
he   speed   is   between   about   18   and  
5

0 mph   (30   and   80   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   18   mph   (30   km/h),
●
 
f
or   automatic pre-collision braking:
-
 
t
he   speed   is   between   about   6   and  
5

0 mph   (10   and   80   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   6   mph   (10   km/h),
●
 
t
he   braking   assistance   systems   (ABS,  
E

BFD,   EBA)   are   not   faulty,
●
 
t
he   trajectory   control   systems   (TRC,   DSC)  
a

re   not   deactivated   or   faulty,
●
 
t
he   vehicle   is   not   in   a   tight   corner,
●
 
t
he   system   has   not   been   triggered   during  
t

he   previous   10   seconds.
Safety