105
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
LOAD SPACE COVER (5 SEAT VERSION)
This rigid shelf conceals the objects stored in the boot. Removing
Fold
the load space cover.
Detach it from the notches A and B
pulling
it towards you.
Raise
it and remove the assembly.
Refitting
Place the load space cover in front
of A and B.
Push it forwards to insert the lugs in
the
notches.
Unfold and clip into the notches C.
Folding
From
the boot, fold the half-shelf,
raising
it to detach it from the notch C. Storing (according to version)
A
location is provided in the back of the rear
seats to accommodate the load
space
cover folded onto itself.
Slide it vertically between the side
guides
located at mid seat back height.
Insert
the hinge first, with the free flaps
turned
upwards.
This rigid load space cover can
form
a shelf. However, as a safety
measure,
do not place objects
on
it which could become dangerous
projectiles
in the event of sharp braking
or
rear impact.
EaSE oF USE and CoMFoRT
4
Practical information
109
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
BLIND, LOAD SPACE COVER
Position the load space screen so as to
present the rear load space cover flaps
towards
you.
Engage the left-hand lug of the roller in
the support A.
The load space cover is the roller blind
type.
T
ake
care
not
to
place
heavy
objects
on
the
load
space
cover
when
unreeled.
Compress
then place the right-hand lug facing the support
B.
Release to engage the roller in its
support.
Unroll the load space cover to the rear
side
pillars.
Engage the ends in the rear notches to
keep
it taut.
To install it
Place the row 3 seats in the fully folded
position.
Raise
the
storage
flap
at
the
boot
sill.
Take
hold
of
the
roller
in
the
centre
and
compress
it
towards
the
left-hand
pillar.
Raise
the
assembly.
EASE OF USE and COMFORT
4
Practical information
11 0
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
To remove it
From the boot, pull the load space
cover
towards you to release it from
the
side pillars.
Guide
the load space cover as it rolls up.
Remove
the clips of the three flaps
from
the base of each row 2 head
restraint.
Compress
the roller to the left to
remove
it from the support B.
Raise
it and pivot it forwards. To store it
Store it in the recess at the boot sill,
with
the two rear flaps uppermost.
First,
compress the load space screen
to
the left.
Release.
Arrange
the two flaps and close the
storage
flap.
The
roller
is
fitted
with
three
flaps
permitting
concealment
of
the
boot, whether the row 2 seats
are
in
the
normal
position
or
the
comfort
position.
Each
flap
has
two
clips
which
are
hooked
on
the
base
of
each
head
restraint.
Practical information
11 2
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
SURVEILLANCE MIRROR
This mirror, placed on top of the central mirror, enables the driver or
front passenger to observe all the rear
seats.
Fitted
on its own ball joint, it's manual
adjustment
is simple and provides a
view
of the rear interior of the vehicle.
It
can also be adjusted for improved
visibility
during manoeuvres or when
overtaking.
REAR WINDOWS
To partially open the rear windows, tilt
the lever and push it fully to lock the
windows
in the open position.
Manual rear view mirror
The rear view mirror has two positions:
-
day
(normal),
-
night
(anti-dazzle).
To
change from one to the other, push
or pull the lever on the lower edge of
the
mirror.
Mirrors and windows
127
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
Recommendations for children:
-
use a suitable child seat if the
passenger is less than 12 years old
or
shorter than one metre fifty,
-
never allow a child to travel on
your lap, even with the seat belt
fastened. For
more information on child
seats, refer to the "Child safety"
section
of chapter 5.
Clean the seat belt straps with
soapy water or a textile cleaning
product, sold by CITR
o Ë n
dealers.
In accordance with current safety
regulations, your CITR
o Ë n dealer can
guarantee
all work or any checks, from
testing
to maintenance, on your seat
belt
equipment.
Have
the seat belts checked regularly
(even
after a minor impact) by a
CITROËN
dealer or a qualified
workshop:
they must not show any
signs of wear
, cutting or fraying
and
they must not be converted or
modified.
The
force
limiter
reduces
the
pressure
of the seat belt against the body of the
occupants.
The pretensioning seat belts are active
when
the
ignition
is
switched
on.
The
inertia
reels
are
fitted
with
a
device
which
automatically
locks
the
strap
in
the
event
of
a
collision
or
emergency
braking
or
if
the
vehicle
rolls
over.
You can unfasten the seat belt by
pressing
the
red
button
on
the
buckle.
Guide
the
seat
belt
after
unfastening.
The
airbag
warning
lamp
comes
on
if
the
pretensioners
are
deployed.
Contact a CITR
o
Ë
n
dealer or a
qualified
workshop.
In
order
to
be
effective,
a
seat
belt:
-
must
restrain
one
person
only,
-
must
not
be
twisted,
check
by
pullin
g in front of you with an even
movement,
-
must
be
tightened
as
close
to
the
body
as
possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as
possible
on
the
pelvis.
d
o not interchange the seat belt
buckles
as
they
will
not
fulfil
their
role
properly
.
If
the
seats
are
fitted
with
armrests,
the
lap
part
of
the
seat
belt
should
always
pass
under
the
armrest.
Check
that
the
seat
belt
is
fastened
correctly
by
pulling
the
strap
firmly.Front seat belts
The front seats are fitted with pretensioners and force limiters.
Rear seat belts
(5 seat version)
The rear seats are fitted with three-
point inertia reel seat belts.
SaFETY
5
Seat belts
128
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
128
Rear seat belts
(7 seat version)
In row 2
The three seats are fitted with three-
point
inertia reel seat belts.
When folding the side seats or the
seat
backs to the table position, avoid
trapping the strap of the centre seat
belt.
When handling the side seats
(removing/installin
g) or when
accessing
row 3, avoid hooking the
centre
seat belt.
Ensure that the centre seat belt is
rolled up correctly in its strengthener
on
the roof. In row 3
The
two seats are fitted with three-
point inertia reel seat belts.d
o not attach the seat belts to the
stowing
rings marked with a red cross,
represented
on the label.
Take
care to hook the seat belts
correctly on the rings provided for this
purpose.The row 3 seat belts which are not in
use can be stored to clear the load
space
and make use of the load space cover
easier.
Hook the snap hook in the location provided
on the rear pillar trim.
Seat belts
130
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
130
Advice
Sit in a normal upright position.
Wear
a correctly adjusted seat belt.
Do
not
allow
anything
to
come
between
the occupants and the airbags
(a
child, pet, object...), do not attach or
fix
anything near to the airbags or their
trajectories
when inflating as this could
cause
injuries when the airbags are
deployed.
Never
modify the original definition of
your vehicle, particularly in the area
directly
around the airbags.
a
fter an accident or if the vehicle has
been
stolen or broken into, have the
airbag
systems checked.
All
work on the airbag system must be
carried out by a CITR
o Ë n dealer or a
qualified
workshop.
Even if all of the precautions
mentioned
are observed, a risk of
injury
or of minor burns to the head,
chest
or arms when an airbag is
deployed
cannot be ruled out.
The
bag
inflates
almost instantly (within a few
millis
econds) then deflates within the
same
time discharging the hot gas via
openings
provided for this purpose.Front airbags
d
o not drive holding the steering wheel
by
its spokes or resting your hands on
the
centre part of the wheel.
Passengers
must not place their feet
on
the dashboard.
Do
not smoke as deployment of the
airbags
can cause burns or the risk of
injury
from a cigarette or pipe.
Never
remove or pierce the steering
wheel
or hit it violently.
Do
not fit or attach anything to the
steering wheel or dashboard, this could
cause
injuries with deployment of the
airbags.
Lateral airbags
Use only approved covers on the
seats,
compatible with the deployment
the
lateral airbags. For information
on the range of seat covers suitable
for your vehicle, you can contact a
CITROËN dealer
.
For
more information on accessories,
refer to "
o ther accessories" in
section 6.
Do
not fix or attach anything to the seat
backs
(clothing...).
This
could cause
injury
to the chest or arms if the lateral
airbag
is deployed.
d
o not sit with the upper part of the
body any nearer to the door than
necessary.
Airbags only operate when the
ignition is switched on.
This
equipment
only
operates
once.
If
a
second
impact
occurs
(during
the
same
or
a
subsequent
accident),
the
airbag
will
not
operate.
The
deployment
of
an
airbag
or
airbags
is
accompanied
by
a
slight
discharge
of
smoke
and
a
noise,
due
to
the
activation of the pyrotechnic cartridge
incorporated
in
the
system.
This
smoke
is
not
harmful,
but
sensitive
individuals
may
experience
some
irritation.
The
noise
of
the
detonation
may
result
in a slight loss of hearing for a short
time. The
passenger's
front
airbag
must
be deactivated if a child seat is
installed
rearward
facing.
Chapter
5,
"Child
safety"
section.
airbags
133
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
133
CARRYING CHILDREN
General pointsCITROËN recommends that
children should travel in the rear
seats of your vehicle:
-
rearward facing
up to the age of 3,
-
forward facing
over the age of 3.
Although
one
of
CITROËN's
main
criteria when designing your vehicle,
the safety of your children also
depends
on
you.
*
The regulations on carrying children
are
specific
to
each
country.
Refer
to
the
legislation
in
force
in
your
country.
For
maximum
safety,
please
observe
the
following
recommendations:
-
in accordance with European
regulations,
all children under the
age of 12 or less than one and
a half metres tall must travel in
approved child seats suited to
their weight,
on
seats
fitted
with
a
seat
belt
or
ISOFIX
mountings*,
-
statistically
, the safest seats in
your vehicle for carrying children
are the rear seats,
-
a child weighing less than 9
kg
must travel in the rearward
facing position both in the front
and in the rear.
SaFETY
5
Child safety