2016 Citroen BERLINGO MULTISPACE 2016

143
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
143
ISOFIx MOUNTINGS
Your vehicle has been approved in
accordance with the latest ISo FIX
regulation.
The
  mountings   comprise   three   rings   for  
each

  seat.
Two front rings A, located between
the
  vehicle   seat   backrest   and   cushion,  
indicated

  by   a   marking.a rear ring B,   located   on   the   back  of
  the   vehicle's   seat   backrest,   for  
securing the upper strap referred to as
the

 
T
op  
T
ether.
The Top Tether is used to secure the
upper strap of child seats that have
one.
 
This
  arrangement   limits   the  
forward tipping of the child seat in the
event

  of   a   frontal   impact.
This
  ISOFIX   mounting   system  
guarantees you fast, reliable and safe
fitting

  of   the   child   seat   in   your   vehicle.
The
  ISOFIX   child   seats   are   fitted   with  
two latches which are secured on the
two front rings

A.
Some
  also   have   an   upper   strap   which  
is attached to the rear ring

B.Follow strictly the instructions for
fitting
  child   seats   contained   in   the  
manufacturer's

  installation   guide.
To secure the child seat to the
Top Tether:
-
 
remove
  and   stow   the   head   restraint  
before installin

g the child seat in
this   seating   position   (refit   it   once  
the

  child   seat   has   been   removed),
-
pass the upper strap of the child
seat over the top of the seat
backrest,

  between   the   apertures   for  
the head restraint rods,
-
 secure   the   hook   on   the   upper   strap  to the rear ring,
-
 
tighten
  the   upper   strap.
The incorrect installation of a child
seat
  in   a   vehicle   compromises   the  
protection of the child in the event
of

  an   accident.
Refer
  to   the   table   for   information   on  
the installation of IS

o FIX child seats in
your
  vehicle.
SaFETY
5
Child safety

144
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
144
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In  this   case,   it   must   be   attached   to   the   vehicle   seat   using   the   three   point   seat  
belt.
Follow the instructions for fitting the child seat given in the

seat
manufacturer's installation guide.
Recommended ISOFIx seat
"ISOFIx RÖMER DUO plus"
(size category B1)
Group 1: from 9 to 18 kg
Installed
  only   in   the   forward   facing   position.
Secured to rings A, as well as ring B, called the Top Tether, using
  an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,   lying.
Child safety

145
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
145
LOCATIONS FOR CHILD SEATS ISOFIx
*  In  the   7   seat   version,   all   three   seats  in
  row   2   must   be   present   when   child  
seats

  are   installed.
**
  
A 
child   seat   with   support   leg   must  
never be installed on an outer
passenger seat in row 2, unless you
are able to install it in line with the
recommendations

  under   "Installing   a  
child

  seat   with   a   support   leg".
In accordance with European regulations, this table indicates the option\
s for the installation of IS
o FIX child seats on the
vehicle   seats   fitted   with   ISOFIX   mountings.
In   the   case   of   the   universal   and   semi-universal   ISOFIX   child   seats,   the   child   seat's   ISOFIX   size   category,   determined   by   a  
letter

  from   A to G,   is   indicated   on   the   child   seat   next   to   the   logo   ISOFIX.
Weight of the child   /   indicative   age
Less than 10 kg
(group 0)
Up   to   6   months  
approx
Less than 10 kg

(group 0)
Less than 13 kg (group 0+)
Up to 1 year approx From 9 to 18 kg
(group 1)
From   1   to   3   years   approx
Type of ISOFI x child seat Infant car seat rearward facing
rearward
facing forward facing
ISOFI x size category
F G C D E C D A B B1
Row 2
(5   and   7*   seats)
o
uter
seats** IL-SU
IL-SUIL-SUIUF, IL-SU
Centre seat Not ISOFI x
Row 3
(7

  seats)
a
ll seats
Not ISOFI xIUF:
seat suitable for the installation
of an IS o FIX Universal child seat,
Forward facing and secured with an
upper
  strap.
IL-SU: seat suitable for the installation
of a IS
o FIX Semi-Universal child seat,
either.
-

rearward facing equipped with an
upper strap or a support leg,
-


forward facing equipped with a
support leg, Remove

  and   stow   the   head  
restraint before installin

g a
child
  seat   with   a   backrest   on   a  
passenger

  seat.
Refit
  the   head   restraint   once   the   child  
seat

  has   been   removed.
-
a cot equipped with an upper strap
or
  a   support   leg.
To attach the upper strap, refer to
chapter
  5,   "ISOFIX   mountings"   section.
SaFETY
5
Child safety

146
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
146
ADVICE ON CHILD SEATS
At the rear, always leave sufficient space  between   the   front   seat   and:
-

a rearward facing child seat,
-


the feet of a child seated in a
forward

  facing   child   seat.
For
  this,   move   the   front   seat   forward  
and, if necessary

, straighten its
backrest
  as   well.
The incorrect installation of a child seat
in
  a   vehicle   compromises   the   child's  
protection

  in   the   event   of   an   accident.
Check   that   there   is   no   seat   belt   or   seat  
belt

  buckle   under   the   child   seat,   as   this  
could

  destabilise   the   seat.
Remember   to   fasten   the   seat   belts   or  
the child seat harnesses

keeping the
slack relative to the child's body to a
minimum,   even   for   short   journeys.
For the installation of a child seat using
the seat belt, ensure that the seat belt
is well tensioned on the child seat
and that it is holding the child seat
firmly   against   the   vehicle's   seat.   If   the  
passenger

  seat   is   adjustable,   move   it  
forward

  if   necessary. For   the   optimum   installation   of   a  
forward facing child seat, ensure that
the

  back   of   the   child   seat   is   as   close   as  
possible

  to   the   backrest   of   the   vehicle's  
seat,

  or   in   contact   if   possible.
The   head   restraint   must   be   removed  
before installin

g a child seat with a
backrest   on   the   passenger   seat.
Ensure that the head restraint is
stowed or attached securely so that it
is not thrown around the vehicle in the
event   of   sharp   braking.
Refit   the   head   restraint   as   soon   as   the  
child

  seat   is   removed.Children at the front
The legislation on carrying a child on
the
  front   passenger   seat   is   specific   to  
each

  country.   Refer   to   the   legislation   in  
force

  in   your   country.
d

eactivate the passenger's airbag
when a rearward facing child seat is
installed
  on   the   front   seat.
Otherwise,
  the   child   would   risk   being  
seriously

  injured   or   killed   if   the   airbag  
were

  deployed.
Installing a booster seat
The chest part of the seat belt must be positioned on the child's shoulder
without   touching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a  
booster

  seat   which   has   a   back,   fitted  
with

  a   seat   belt   guide   at   shoulder   level.
As
  a   safety   precaution,   never   leave:
-
 
one
  or   more   children   alone   and  
unsupervised in a vehicle,
-

 
a
  child   or   an   animal   in   a   vehicle  
which is exposed to the sun, with
the windows closed,
-

 
the
  keys   within   reach   of   children  
inside

  the   vehicle.
To prevent accidental opening of the
doors,
  use   the   "Child   Lock".
Take
 
care
 
not
 
to
 
open
 
the
 
rear
 
windows
 
by

  more   than   one   third.
To
  protect   young   children   from   the   rays  
of

  the   sun,   fit   side   blinds   to   the   rear  
windows.
For an installation in row 3, put the
backrests

 
of
 
the
 
outer
 
and
 
centre
 seats in row 2 in the table position, or
remove
 
these
 
seats
 
in
 
row
 
2,
 
so
 
that
 
the child seat or the child's legs do not
touch

 
the
 
seats
 
in
 
row
 
2.
Child safety

 147
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
 147
CHILD LOCK
This prevents opening of the siding
side  doors   from   the   inside.
Manual Electric
With the ignition on, press
this
  button   in   the   middle   of  
the

  dashboard.
Indicator
  lamp   on   =   child   lock  
on.
Please

 
note:   this   system   is  
independent

  of   the   central   locking  
control.Always

  remove   the   ignition   key  
when leaving the vehicle, even for
a

 
short   time.
It
 
is
 
advisable   to   check   the   state   of  
the

 
child
 
lock   each   time   the   ignition   is  
switched

  on.
In
 
the
 
event   of   a   serious   impact   the  
electric

 
child   lock   is   deactivated  
automatically

.
a label indicates the position of the
lever

 
and
 
the
 
state
 
of
 
the
 
child
 
lock.
-
o
pen fully past the point of
resistance.
-

T

ilt the lever, located on the rear
section
 
of
 
the
 
door.
SaFETY
5
Child safety

148
Towing a trailer
Berlingo-2-VP_en_Chap06_accessoire_ed01-2016
For more information about weights and towed loads, refer to
chapter  9,   "Weights"   section.
TOWING A TRAILER , A CARA VAN ...
Distribution of loads
d

istribute the load in the trailer so
that
  the   heaviest   objects   are   as  
close as possible to the axle and
the nose weight is close to the
maximum

  authorised   without,   however,  
exceeding

  it.
Cooling
Towing a trailer on a slope increases
the
  coolant   temperature.a s the fan is electrically controlled, its
cooling capacity is not dependent on
the
  engine   speed.
You should therefore use a high gear
to lower the engine speed and reduce
your
  speed.
In all cases, pay attention to the
coolant
  temperature.
Driving advice
A towed   vehicle   must   free   wheel:  gearbox
  in   neutral.

 149
Towing a trailer
Berlingo-2-VP_en_Chap06_accessoire_ed01-2016
Good Practice
In certain cases of particularly arduous
use  (towing   the   maximum   load   up   a  
steep

  slope   in   high   temperatures),   the  
engine

  automatically   limits   its   power.  
In this case, the air conditioning is
automatically

  cut   off   to   save   engine  
power

.
Tyres
Check
  the   tyre   pressures   of   the   towing  
vehicle and of the trailer

, observing the
recommended
  pressures.
Chapter
  7,   "Levels"   section.
If
  the   coolant   temperature  
warning

  lamp   comes   on,   stop  
the vehicle and switch of

f the
engine
  as   soon   as   possible.Brakes
Towing
  increases   the   braking   distance.  Drive
  at   a   moderate   speed,   change  
down

  early   and   brake   gradually.
Towbar
We recommend the use of genuine CITRo Ë n towbars and their wiring
harnesses, which have been tested
and
  approved   from   the   design   stage   of  
your vehicle, and that you entrust the
fitting

  of   this   equipment   to   a   CITROËN  
dealer

.
If
  this   equipment   is   not   fitted   by   a  
CITROËN

  dealer,   it   is   imperative   that  
it

  is   fitted   using   the   electrical   pre-
equipment
  installed   at   the   rear   of   the  
vehicle and in accordance with the
manufacturer's

  instructions.
In accordance with the general
instructions
  a   reminder   of   which   has  
been given above, we draw your
attention

  to   the   risk   associated   with  
fitting

  a   towbar   or   electrical   accessory  
not

  recommended   by   CITROËN.  
Fitting

  such   equipment   could   result   in  
the failure of your vehicle's electronic
system.

  Please   obtain   information   from  
the

  Manufacturer   before   fitting   this   type  
of

  equipment.
Side wind
Sensitivity
 
to
 
side
 
wind
 
is
 
increased.
 
Drive

 
smoothly
 
and
 
at
 
a
 
moderate
 
speed.
ABS/DSC
The

 
ABS

 
or
 
DSC
 
systems
 
only
 
control
 
the

 
vehicle,
 
not
 
the
 
trailer
 
or
 
caravan.
Parking sensors
The
 
rear
 
parking
 
sensors
 
system
 
does
 
not

 
function
 
while
 
the
 
vehicle
 
is
 
towing.
Chapter
 
9,
 
"Identification
 
markings"

 
section.
ACCESSORIES
6

150
Towing a trailer
Berlingo-2-VP_en_Chap06_accessoire_ed01-2016
TOWBAR WITH SWAN NECK T
OWBALL ,
LOCKABLE

AND
QUICKL
Y
DET

ACHABLE
Presentation
This swan neck towbar, delivered assembled,   can   be   removed   and   fitted  
easily

.   No   tools   are   needed.
Instructions for fitting and before
every use
Check
  that   the   swan   neck   is   correctly  
locked

  by   verifying   the   following   points:
-
 
the
  green   mark   on   the   locking  
wheel is visible,
-

 
the
  safety   lock   on   the   locking   wheel  
is directed toward the rear

,
-
 
the
  safety   lock   is   closed   and   the  
key

  removed;   the   locking   wheel   can  
no longer be operated,
-

 
the
  swan   neck   must   no   longer  
move

  at   all   in   its   carrier.
When
  hooking   up   the   trailer,   don't  
forget

  to   connect   the   trailer   harness.
Fitting