2016 AUDI S8 low beam

Instruments and indicator lights
Other indicator ligh ts
D
--------------
Turn signa ls
c::> page22
USA mod els: C ruise co ntro l*
c::> page 88
Canada m odels: C ruise contro l*
<=:> page 88
Adaptive cruise control*
c::> page 92
Adaptive cruise control*
c::> page 92
Adaptive cruise control*
c::> page 92
Audi active lane assist*
c::> page 100
Start-Stop-System*
c::> page 85
Start-Stop-System*
c::> page 85
High beam assist* <=:> page 49
High beam
c::> page 48
BRAKE /C©) Brake system
If
the indicator light turns on, there is a malfunc­
tion in the brake system.
1111 (USA models )!II (Canada models ) Stop
v ehicle and check brake fluid level
Stop the vehicle and che ck the brake fluid level.
See yo ur autho rized Audi dealer or qualified re ­
pair facility, if necessary .
Brakes: malfun ction! Plea se st op vehicle saf ely
If t he ABS indicator light ~ (USA mode ls)/ 11]
(Canada models) , the ESC indicator light
Ji] and
the bra ke system ind icator light
1111 ( U SA mod­
e ls)/ . (C anada models) turn on and the mes­
sage appears, the ABS, ESC and brak ing distribu ­
tion are not working
c::> .&, .
Stop the car and get professiona l ass istance
c::> .&. .
14
1111 (USA models )!II (Canada model s) Park­
ing b rake : system fault! Plea se contact deale r
-If the ind icator light and the message appea r
when stati on ary or aft er swit ching the igni­
t ion on ,
check if you can release the parking
brake . After releasing the parking brake, care­
fully drive to your author ized A udi dealer im ­
mediately to have the malfunct ion corrected. If
you cannot release the park ing brake, seek pro­
fessional assistance.
- If the ind icator light and the message appear
while d riving , the emergency brak ing funct ion
may not be available. It may not be poss ible to
set the parking brake or re lease it once it has
been set . Seek profess ional assistance .
(USA mode ls) : If the warning light
1111 and the
warning light
IIJ appear together, immediately
contact your author ized Audi dealer or qualified
workshop to have all brake pads inspected
c::> page 19 .
When the light comes on, an audible warning sig­
nal is also given .
A WARNING
-Always observe the warnings i n
c::> page 220, before opening the hood and
checking the bra ke fluid.
- Dr iving with low brake fluid is a safety haz­
ard. Stop the car and get profess ional assis­
tance .
-If the 1111 (USA models)/ . (Canada mod­
e ls) brake system indicato r light turns on to­
gethe r wi th the A BS and ESC indic ator
lights, the A BS/ ES C r egu lating function may
have fa iled . Functions that stabilize the ve ­
hicle are no longer availab le. T his co uld
cause the vehicle to swerve and increase the
risk of slid ing . Stop the car and get profes­
sional ass istance.
- If the brake warning/indicator light does
not go out after a few seconds and the park­
ing brake is released, or lights up wh ile you
are driving, the fluid level in the brake f luid
reservoir is too low . If yo u be lieve that i t is
safe to do so, proceed immediately at low
spee d to the ne arest a uthori zed Audi dealer
~

Instruments and indicator lights
§0 Adaptive Light
Applies to: vehicles with Adaptive Light
m;J Audi adaptive light : system fault
If the indicator light turns on and th is message
appears, there is a malfunction in the adaptive
light system . The head lights st ill function .
Go to an authorized dea lership to have the head­
lights or the control unit for the Adaptive Light
repaired .
~D Light /rain sensor
!;I Automatic headlights /automatic wipers:
s y stem fault
If the ind icator lig ht t urns on and th is message
appears, the light/ra in sensor is no t funct ioning
correct ly.
For safety reasons the low beams are turned on
permanently with the switch in
AUTO . However,
you can continue to turn the lights on and off us­
i n g the light swi tch. You can still con trol a ll func­
tions th at are in dependen t of t he rain senso r
through t he w indshie ld w iper lever.
Contact your author ized Audi dealer as soo n as
possible to have the prob le m corrected.
I-: Sport differential
1,11 Sport differential : sy stem fault
There is a malfunc tion wi th t he sport differential.
Drive to yo ur authori zed Aud i dea le r i mmediately
to have the malfunct ion corrected.
1,11 Sport differential: overheating
T he t ransm iss ion tempe rature h as increased s ig­
n ificant ly due to the spor ty driv in g manne r. Dr ive
in a less sporty ma nner un til the tem perature re ­
turns to the normal range and the indicator light
sw itches o f.
A WARNING
Contact your authorized Audi dealer or a
qualified workshop if the sport differentia l is
faulty or malfunctioning . The repair m ust be
22
performed by t rained personnel using the cor­
rect oil in order to ensure safety .
¢ Q Turn signals
The indicator light blinks when you use either
turn signal.
Wheneve r yo u use the left II or the r ight B
turn s ignal, the indicator light blinks . When you
u se the emergency flashers, both indicator lights
flash.
I f one of the turn sign al light bulb s bu rn o ut, the
turn s ignal will b link twice as fast as no rma l.
Caref ully drive to yo ur authorized Aud i dea le r im ­
med iate ly to have the malfunction corrected. The
i ndicato r light does not indicate a ma lfunction if
a turn signal on the trailer or on the vehicle fails i n trailer towing mode.
(D Tips
Fo r more informati on on the t urn signa ls, re­
fer to
¢ page 48.

Lights and Vision
Lights and Vision
Exterior lighting
Switching the headlights on and off
Fig. 42 Instrument panel : lig ht sw it c h with all -weather
l igh ts
The headlights only wo rk when the igni tion is
sw itched on. Whi le sta rting the engine or when
switching off the ignition, the headlights will go
off and only th e side marker lights will be on.
I f the sys tem i s not operating p roperly, a warning
symbo l in the drive r informat ion d isplay is dis­
p layed
c::> page 21 .
Light switch -'t;f;
T urn the switch ~ fig. 42 to the corresponding
position . When the lights are sw itched on, the
:oo:
symbo l turns on .
0 - The l ights are off or the daytime runni ng
lights are on :
-USA mode ls: The daytime running lights will
come on automatically when the ignition is on
and the light sw itch
c::> fig . 42 is in the O posi­
tion or the
AUTO position (only i n daylight con­
di tions). The
Daytime running li ght s func tion
can be turned on and off in the MM I
c::> page 47, c::> &.
- Canada mo del s: T he daytime runn ing lights
will come on automa tically when the ignit io n is
o n and the light switch
c::> fig . 42 is in the O po­
s ition, the
:oo : pos ition or the AUTO position
(on ly in daylight conditions)
c::> & .
AUTO -Automatic head light s switch on a nd off
depending on br igh tness , for example i n tw ilight,
du ring ra in or in tunne ls
c::> & .
46
:oo : -Side marker lights
gD -Low beam headlig hts
~ - All-weather lig hts
@il -Rear fog lights *. When the rear fog lights are
on, the symbol
0$ on the switch will illuminate .
All-weather lights
The front lights a re adjus ted au toma tica lly so
that you are less likely to see g la re from your own
headlights, for example whe n driving on a wet
road.
Automatic dynamic headlight range control*
Yo ur vehicle is equipped wi th a headlight range
contro l system so that the head lights do not
bl ind oncoming t raffic if the vehicle load
changes. The head light range also adjusts auto­
matically when brak ing and acce lerating .
Light functions
The following ligh t fu nct ions are available de­
pend ing on vehicle e quipment and o nly fu nction
whe n the light switc h is in the AUTO position.
You can deactivate these fu nctions in the M MI
unde r
Audi adapti ve light c::> page 47.
Static cornering light* -the corne ring ligh t
switches on automat ically when the steering
whee l is turned at a certain angle at speeds up to
app roximately 44 mph (70 km/h) and when the
turn s ignal is activated at speeds up to approxi­
ma tely 25 mph (40 km/h) . The area to the side of
the ve hicle is illuminated better when turning .
Dynamic curve light* -the curve light adapts it­
self to the curves in the road .
Highway light fun ction* -this funct ion adapts
the lighti ng for highway d riving based on vehicle
speed .
A WARNING
--Automatic headlig hts are only intended to
assist the driver . They do not relieve the
driver of his responsibi lity to check the
headlights and to turn them o n manually
according to the cur rent light and vis ib ility
co ndi tion s. For example, fog cannot be

Lights and Vision
Autom atic headli ghts
You can adjust the follow ing settings in the Au ­
tomatic headlight s
menu:
Headlights activation time -You can adjust if the
headligh ts switch on
Early , M ed . or Late accord ­
i n g to the sensitivity of the light se nsor.
Audi adaptive light * -You can switch adaptive
light
On and Off .
Autom atic high beams *
You can switch the high beam ass ist on and off .
Daytime running lights
USA models:
You can switch the daytime r unning
lights
on and off .
Canada m odels:
The function ca nnot be tu rned
off.
It is activ ated au tomatically each time the ig­
n ition is switched on . This menu item is shown
"greyed out" .
Coming home, Leaving home
The com ing home func tion illum ina tes the area
ou tside the ve hicle when yo u sw itch the igni tion
off and ope n the driver's door . To tu rn the f unc­
t ion on, select
Lights when leaving car > On .
The leav ing home function illuminates the area
ou tside the ve hicl e when yo u un lock the vehicle .
T o tur n the function on, select
Lights when un­
locking car > On.
The com ing home and le aving home f unctions
only operate w hen it is dark and the lig ht sw itch
is in t he
AUTO position.
48
Turn signal and high beam lever
The lever on the left side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher .
Fig. 44 T urn signa l an d hi gh beam lev er
The turn signa l and hig h beam lever has the fol­
l owing functions:
Turn signals¢ Q ©@
N 0
9 :I:
~
.,. Push the leve r up as f ar as it ca n go to t urn on
t he rig ht tu rn signa l or down to tur n on t he left
turn signa l
r:!>fig. 44 .
.,. Move th e lever br ie fly u ntil yo u meet r esistance
and release it to flash three times.
.,. Move the lever (up or down) unt il y ou meet re­
sistance and ho ld it there to determine the
flashing time for the turn sig nals .
High beam gD@
.,. Push the lever fo rward to sw itch on the high
beam (vehicles wit h high beam assist*
r:!> page49).
.,. Pull the lever back towards you to switch off
the high beam .
Headlight fla sher gD ©
.,. Pull the lever toward the steering whee l to use
the headlight flasher.
Notes on these features
- The turn signals on ly wor k w it h the ignition
sw itc hed on. The ind icator lights
II or H in
the instrument cluster ¢ page 11 also blink.
- After you h ave t urned a corner, the turn signa l
sw itches o ff automat ica lly.
- Th e
high beam works only when the head ligh ts
are on. The ind icator light
Bl in the instrumen t Iii>

.... N
cluster illuminates when the high beams are
on.
- The
headlight flash er works only as long as you
hold the lever -even if there are no lights
turned on. The indicator light
& in the instru­
ment cluster illum inates when you use the
headlight flasher.
A WARNING
Do not use the high beam or headlight flasher
if you know that these could bl ind oncoming
traffic.
High beam assist
App lies to: vehicles with high beam assist
The high beam assist automatically switches the
high beams on or off, depending on the sur­
roundings and traffic conditions.
Fig. 45 Turn s ignal and h igh bea m lever : Turning on and
off the high beam assist
Activating high beam assist g
,.._ 0 ± .,. a,
Requirement:
The light switch must be in the AU­
TO pos ition, the low beam headlights must be on
and the high beam assist must be switched on in
the Infota inment ~
page 47 .
.. Press the lever forwards (Din order to activate
the high beam assist. The indicator light
II
turns on in the instrument cluster display and
the high beams switch on or off automatically.
T he ind icator light
B turns on if the high
beams were switched on.
Switching the high beams on/off manually
a Requirement: High beam ass ist is activated . J:
'SI: .... .... Lights and Vision
If the high beams did not switch on/off automat­
ica lly when expected, you may instead switch
them on/off manually:
.. To switch the high beams on manually, press
the lever forwards (D. The indicator light
II
turns on.
.. To switch the high beams off manually, pull the
lever backwards @. The high beam assist is de­
activated.
Operating the headlight flasher
.. To operate the flashers while the high beam as­
sist is active and the high beams are switched
off, pull the lever into position@. The high
beam ass ist will remain active.
Messages in the instrument cluster display
Headlight assist: System fault
Drive to your authorized Audi dealer immediate ly
to have the malfunction corrected. You can still
switch the high beams on or off manually .
Headlight assist: Unavailable . No camera view
The camera view is blocked, for example by a
sticker or debris.
The sensor is located between the interior rear­
view m irror and the windshield. Therefore, do not
place any stickers in this area on the windshield .
Service setting
There is a different sensitivity setting for servic­
ing. This setting can be activated by pressing and
ho lding the button on the interior rearview mir­
ror for more than 18 seconds. The LED next to
the button blinks three times. If you have acci­ dentally selected th is service function, the origi­
nal sens itiv ity will be automat ically restored the
next t ime you sw itch the ignition on.
A WARNING
High beam assist is only intended to assist
the driver. The driver is still responsible for
controlling the headlights and switching the
high beams on and off manua lly depending
on traffic, lighting and visibility conditions.
Fail ure to intervene manually may lead to r isk
Ill>-
49

Lights and Vision
of accident . It may be necessary to operate
the high beams manually in the following sit­
uations, e.g.:
- For adverse weather conditions such as fog,
heavy ra in, blow ing snow or spraying water.
- On roads where oncoming traffic may be
partially obscured such as expressways.
- If there are individuals on the road with no
lighting or poor light ing, s uch as cyclists.
- In tight curves and on steep slopes .
- In poorly lit areas .
- Wi th stro ng reflecto rs such as signs.
- If the area of the windsh ield near the sensor
is fogged ove r, dirty, icy or covered with a
s ticker.
(D Tips
- The high beam ass ist is active above a speed
of app rox.
25 mph (40 km/h).
- If after activation, your speed fa lls below
approx.
15 mph (24 km/h), the hig h beams
will automatically be switched off.
Interior lighting
Front and rear interior lighting
Fig. 46 Headliner : Front interior lights
Fig. 47 Rear headli ner: Read ing light
50
Press the appropriate button ~ fig. 46:
§]-Inter io r l ight ing on/off
~ -Door contact switch on/off . The inter io r li ght­
i ng is controlled automatically.
~ -Reading lights on/off
~ -Switching the rear readi ng lig hts on/off from
the cockpit .
I REAR MODEi* -Sw itch ing the rear reading lights
on/off from the co ckpit: press the I REAR MODE!
button and then the approp ria te button ~ in the
cockpit.
Ambience lighting
Applies to: vehicles with ambience lighting
You can select a color prof ile and brightness for
the ambience lighting in various areas of the ve­
hicle, called zones.
Turning ambience lighting on
.. Select in the MM I: ICAR !fu nction button> Car
sy stems
control button > Vehicle settings > In ­
terior light ing
> On .
Adjusting /turn ing off the brightness
.. Select in t he M MI: ICAR !f unc tion bu tton > Ca r
sys tems
control button > Vehicle settings > In­
terior light ing
> Brightness .
.. Turn the knob to the desired vehicle area and
press the knob. The bar that appears indicates
the selected brightness .
.. To increase or reduce the brightness, turn the
knob and press it .
Selecting a color profile*
.. Select in the MMI: ICAR ! function button > Car
systems
control button > Vehicle settings > In­
terior lighting > Color p rofile .
The ambience lighting tu rns o n when the fu nc­
tion is activated in the MMI and when you turn
the headlights on while the ignition is switched
on.

-The windshield is being defrosted~ page 79.
-The brake pedal is pressed sever al t imes in a
row .
- T he battery charge level becomes too low .
- High power cons umption .
Switching the ignition off automa tic ally
To prevent the battery from dra ining, the ignition
will sw itch off
auto mati call y when all of the fol­
lowing cond itions have been met:
- The vehicle has already been driven.
- The eng ine has been turned
off by the Start-
Stop -System*.
- The driver's door is opened .
- The driver's seat bel t is removed.
- The brake pedal is not p ressed down.
- The veh icle is stationary.
In this case, the activated low beam will be re­
p laced by the s ide marker lights. The side marker
lights will switch
off after appro ximately 30 mi­
nutes or when you lock the veh icle.
If the Start-Stop System has
not turned off the
engine or if you have sw itched the Start-Stop sys­
tem
off manually , the ignition will not be auto­
mat ica lly switched
off and the engine w ill contin­
ue to run~& .
& WARNING
Never allow the engine to r un in confi ned
spaces - da nger o f as phyxia tio n.
(D Tips
-
If you shift in to the D, Nor S posit ions after
shifti ng into reve rse, the veh icle must be driv­
en faster th an 6 mph (10 km/h) in order for
t he eng ine to swi tc h
off aga in.
D rivi ng
Switching the Start-Stop-System on/off
manually
Applies to: vehicles with Start-Stop-System
If you do not wish to use th e system, you can
switch it off manually.
Fi g. 93 Center console: Start-Stop -System button
.. To switch the Start-Stop-System off/on man­
ually, press the
l(A) ~ I button. The LED in the but­
ton turns on when the system is switc hed
off.
(D Tips
If you sw itch the system off during a stop
phase, the engine will start aga in automati­
cally .
Messages in the instrument cluster display
Applies to: vehicles with Start-Stop -System
Start-Stop system deactiv ated: Plea se restart
engin e manually
This message appears when spec ific conditions
are not met during a stop phase and the Start­
Stop-System will
not be able to resta rt the en­
gine.
If the Dor R selector leve r pos itions we re
engaged, P w ill be sele cted automatically. The
engi ne m ust be st arted wi th t he
I START ENGINE STOP! button .
Start-Stop s yst em : S y stem fault! Function un­
available
There is a malfunction in the Start-Stop-System.
Drive the vehicle to an a uthorized repair facility
for serv icing as soo n as poss ible to cor rec t the
malfunction .
87

Night vis io n ass is ta nt
- Marking pedestrians or w ild animals in red in
th e inst rument cluster and turning on the.
or . symbol c::>fig.119 .
- Sounding a warning tone .
The area regarded as cr itical depends on the vehi­
cle speed and steering angle. Pedest rian and wi ld
an imal warning aims to increase you r attention.
I f the n ight vision assistant image is replaced by
another display such as the tr ip computer , the
red indicato r lamp . or. c::>
fig. 120 will turn
on when there is a pedestrian or wild animal
warn ing.
I f the Head-up Display* is swi tched on a nd the
n ight vision assistant disp lay content is activat­
ed, the display . or. appears in the Head -up
Disp lay *.
Marker light *
To draw the drive r's a ttent ion to the pedestrian,
the head lights can flash brief ly on t he pedest rian
three times when there is a pedes trian warn ing .
This happens at speeds above approx imately
35 mph (60 km/h) when you a re t raveling out­
side of we ll-lit areas and when flashing the head­
lights will not create glare for a vehicle detected
in the oncoming lane . The mark er light* is con­
trolled by the h igh beam assist*
r:::;, page 49, High
beam assist .
The headlights do not flash on w ild a nimals.
General information
Applies to: veh icles w ith night vision ass istant
Fi g. 121 Fr ont of the v ehicl e: nig ht v is io n ass istant came ra
The fo llow ing s ituations may affect the function
of the nigh t vis io n assis tant system:
110
- poor visibility such as snow, rain, fog or heavy
road spray
- dirty lens on the night vision ass istant camera
Make su re the n ight v ision assistant camera
c::>
fig . 121 is not covered by st icke rs , depos its or
any othe r obstr uctions because that can prevent
t h e camera from working properly. For informa ­
tion on cleaning the lens, refer to
c::> page 206 .
Pedestria n and wild anima l detect io n depends on
the d ifference in temper ature between the per­
son/w ild an imal and the backg round area . Pedes ­
trians/wild animals may not be detected if the
difference is too smal l. Pedestr ian and wild ani­
mal mark ing and the marker light* are deactivat ­
ed at temperatures above approximate ly 77 °F
(25
°() and when it is light outside. When the
night v is io n assistant image is selected in the in ­
strument cluster d isplay, the
II symbol appears
i n the upper right.
A WARNING
Nig ht vision ass istant has limits and can not
al ways detect pedestr ian s. A lways pay close
attention to t raff ic and the area around your
vehicle eve n when night vision assistant is
switched on .
- Night vision assistant can only warn about
peop le and wild a nimals located within the
visual range of the infrared camera. The vis ­
ual range corresponds to the image in the
instrument cluster disp lay.
- Night vision assistant may not detect people
or w ild an imals and mark them if
- th ey are not in an upright position, fo r ex ­
amp le if they a re sitting or lying down
and/or
- the silhouette i n the display is incomple te
or inte rrupted, for exam ple bec ause a per­
so n is partially cove red by a parked vehicle
or a wild animal is pa rtially covered by tall
grass. This increases the risk of a co llision.
- Never try to swerve to avoid animals if this
w ill put you or other drivers at r isk. This
could inc rease the risk of a collision.
-