2016 AUDI Q5 warning lights

Driver information s ystem
the dr iver information system . Keep in m ind that
the engine speed will not exceed the value dis ­
p layed in the dr iver information system, for ex­
ample when downshifting.
Please go to an autho rized Aud i dea le r or other
qualified workshop to have the ma lfunction re ­
pa ired .
,m.. Diesel particulate filter clogged
Applies to veh icles: w ith diesel e ngi ne and d iesel pa rt icu late
f ilte r
II Particulate filter See owner's manual
When the II symbol illum inates, you can a lter
your driving sty le to assis t the fi lter self-cleaning
p rocess . Drive for approx ima tely 15 minutes with
the selector lever in the S position a t a min imum
speed of 37 mph (60 km/ h) a nd an engine speed
of approximate ly 2,000 RPM . The tempe rature
increase that w ill result from this can burn off
the soot in the fi lter. The symbol will sw itch off
when the clean ing is successful. After a success ­
fu l cleaning, there is no need to br ing the car to
an author ized deal er or qualified workshop b e­
cause this is part of no rm al veh icle oper ation.
If t he symbo l
II does not switch off, see you r
author ized dealer or other qualif ied workshop to
have the prob lem cor rected.
For more information on the diesel particulate
fi lter, refer to
c> page 198.
A WARNING
Always ada pt your speed to the c urrent
w eather, road and traffic conditions . Y ou
should never dis obey traffi c la ws in orde r to
follow driving re co m mend ation s.
~()) Headlight range control defective
II Headlight range control defective!
If th e symbol II ill um ina tes, the dynamic head­
lig ht ra nge co ntrol is no longer wo rking prope rly.
H ave t he sys tem checked and repa ired at you r au­
t hor ized Audi dealer .
34
~O Adaptive light defective
Applies to vehicles: with adaptive light
mil Audi adaptive light : defe ctive
When this symbol mil ill uminates, it means that
adaptive ligh t is defective. Go to a n author ized
Audi dealer to have the head lights or the contro l
u nit for the adapt ive light repa ired.
@ -Steering malfunction
El! Steering lock: Contact dealer!
If the El! symbo l in t he d isp lay comes on, there
i s a n elect ronic stee ring column lock malfu nc­
tion.
D rive to your author ized A udi dealer immed iate ly
to have the malfunc tion cor rected .
A WARNING
Your ve hicl e m ust not be towed in the event
of a m alfunction in the elec tronic s teering
column lo ck bec ause it c an no t b e stee red due
to the lo cked steering. If i t i s towed w ith the
steering locked, there is the risk of an acc i­
dent .
~ Ignition lock malfunction
m Ignition lock defective
If the l3 symbo l in the d isplay comes on, the re is
a malfunction i n the elect ronic ignition lock .
Please go to an authorized A udi dealer or other
qualified workshop to have the malfunct ion re­
paired.
; Adaptive dampers
App lies to vehicles: with Aud i drive se lect
R Suspension : System fault!
If the R symbol in the d isp lay comes on, the re is
a mal function in the adaptive dampers. Please go
to an authorized Aud i dea le r or other qualified
workshop to have the ma lfunction repaired.
· ~ Windshield wipers faulty
El Windshield wipers defective

Opening and closing
Automatic rear lid/trunk lid operation
A pp lies to veh icles: w ith a uto mat ic rea r lid/tr unk lid opera ·
t io n
The trunk lid con be opened and closed outomot·
icolly.
F ig . 36 D river's doo r: Unlock ing the rea r lid
Fig . 37 Loc king sw itc h in th e rea r lid
Opening the luggage compartment lid
., Press the b utton c::5 on the maste r key for at
least o ne se cond, or
., Pu ll t he rele ase bu tton
c::5 in the driver's door
c::> fig. 36, or
., Press the handle in the luggage compartment
lid
c:;, page 43, fig. 35.
Closing the luggage compartment lid
., Press t he b utton in the luggage compartment
li d
c::> fig. 37. Th e lid w ill automa tic ally close
and lock
c::> ,&. .
Setting the luggage compartment lid open
position
0 cl:
"' al
., Br ing the luggage comp artment lid i nto the de·
sired open position . The pos ition can on ly be
stored when the lid is above a ce rtain height .
44
., Press and hold the c::> fig . 3 7 but ton for at lea st
four seconds until the lights bli nk to store the
desired open pos ition .
.,. To set a higher open pos ition, wa it at least five
seconds and then carefully press t he luggage
compartment lid upward .
., Press and hold the
c::> fig . 37 button again for at
least four seconds and this will store the new
open posit ion.
Opening w ill be stopped immediately when:
- You press the
c::5 button on the remote key for
at least of one second, or
- press the unloc k button
c::5 in the driver door,
or
- press the lock button the in the luggage com·
partment lid, or
- push the handle in t he luggage compartment
lid, o r
-when something blocks the rear lid or makes it
diffic ult for the lid to move .
B y pre ssing one of the button
c::5 repe ated ly, yo u
can stop or continue the ope ning process. The
pressing the lock button or the handle repeated ·
l y, you can ope n/stop the lid
c::> & .
Closing wi ll be stoppe d im medi ate ly when :
- press the lock button the in the luggage com·
par tment lid, or
- push the handle in the luggage compartment
lid , o r
- when some thing blocks the rear lid or makes it
diff ic u lt for the lid to move .
The press ing the lock button or the hand le re·
peatedly, you can open/stop the lid
c:;, & .
You can manua lly stop the automatic opening/
closing of the luggage compartment lid. In this
s ituation, the lid can be manua lly opened. Press
down on the lid and the automat ic closing will re·
s u me once again .
_& WARNING
-Never close the rea r lid inattentively or w ith­
ou t checking fi rst. Al tho ugh the clos ing
for ce of th e re a r lid i s limited, you can stil l
serio usly i njure you rself o r others .

Opening and clo sin g
The rear doors are equipped wit h child safety
locks. The lock is only visib le when the door is
open . Take the mechanica l key out of the master
key
9 page 3 7 .
Swi tch ing th e child saf ety locks on
" Turn the key in the d irect ion of the arrow
~ fig. 39.
Switching the child safety locks off
"Turn the key in the opposite direction of the ar·
row .
When the child safety locks are activated, the in·
side door handles do not work and the doors can
only be opened from the outs ide.
Power windows
Controls
The driver can control all power windows .
Fig. 40 Sect ion of the driver 's doo r: Contro ls
All power window switches are provided with a
two-position funct ion :
Open ing the windo ws
... Press the switch to the first stop and ho ld it un·
ti l the window reaches the desired position .
... Press the switch briefly to the
second stop to
automat ically open the window .
Closing the window s
... Pull the switch to the first s top and hold it until
the window reaches the desired posit ion .
... Pull the switch briefly to the
sec ond stop to au·
tomatically close the window.
46
Power window swit ches
(D Driver 's doo r
@ Passenger's door
@ Left rear door
@ Right rear door
® Safety button
Child safety l ocks
When the safety button ® is pressed, the @
symbol in the butto n lights up. The power win·
dow switches in the rear doors are switched off.
A WARNING
-When you leave your vehicle· even if only
briefly· always remove the ignition key. This
appl ies particularly whe n children rema in in
the vehicle . Otherwise the children could
start the engine or operate electrical eq uip·
ment (e.g. powe r windows). The power win·
dows are f unctio nal until the driver's door or
passenger's door has been opened.
- P ay close a ttent ion when closing the w in·
dows to prevent pinching of hands or limbs.
- W hen locking the vehi cle from o utside, the
veh icle must be unoccupied si nce the win·
dows can no longer be opened in an emer ·
gency .
{i) Tips
After the ignit ion has been swi tched off, the
windows can st ill be opened or closed for
abo ut 10 minutes . The power w indows are
not switched off unt il the dr iver's door or pas·
senger's door has been opened.
-

Lights and Vision
Lights and Vision
Exterior lighting
Switching the lights on and off
Fig. 46 Instrument panel: l ight sw itch
S wi tch in g on AUTO· Automatic headlight
controls
• Turn the light switch to AUTO c> fig. 46 .
Sw itch ing on the side marke r lights
• Turn the light switch to ~o o:.
Switching on low beams
• Turn the light swi tch to io.
Sw itch ing off the lights
• Turn the light switch to 0.
The low beams only illuminate with the ignition
turned on.
With the side marker lights or headlights switch­
ed on, the symbol next to the light switch i llumi­
nates
~oo~.
AU TO -Automatic headlight control
W ith the swi tch in the AUTO posit io n, the low
beams are switched on automat ic all y depending
on the ambient light, fo r example in a tunnel, at
dusk and when it is raining or snowing. When the
low beams are switched on, the
~oo~ symbol
comes on. The low beams remain switched on re­
gardless of the amb ient light when you turn on
the fog lights .
When you turn off the ignition , the low beams
are automat ically switched off .
52
With automatic head light cont rol, you also have
the high-beam function available. However, if
you have not switched high beams back to low beams while driving with automatic headlight
contro l, only the low beams come on the next
time you turn on automatic headlight control. In
o rder to return to h igh beams agai n, you first
have to pull the hig h beam lever back to the nor­
mal pos it ion and then push the leve r fo rwa rd.
Light sen sor malfunction
In the event of a light sensor malfunction, the
dr ive r is notified in the instrument cluster dis ­
play:
El Automat ic headlights / auto matic wipers
defective
For safety reasons, the low beams are turned on
permanently with the switch in
AU TO . However,
you can contin ue to turn the lights on and off us­
i ng t he light switch. Have the light sensor
checked as soon as poss ible at an autho rized Aud i
dealer or other qualified workshop .
_&, WARNING
-Automatic headlights are only inte nded to
assis t the driver. They do not relieve the
driver of his respon sib ility to check the
headligh ts a nd to turn them o n manually
according to the cur rent light an d visibility
conditions. For example, fog cannot be de­
tected by the light sensors. So a lways switch
on t he headlights
io under these weather
conditions and when driving in the dark .
- Crashes ca n happen when you cannot see
the road ahead and when you cannot be seen by other motorists. Always turn on the
headl igh ts so that you ca n see ahead a nd so
that others can see yo ur car from the back.
- Please obey all laws w hen us ing the lighting
sys tems described here.
@ Tips
- The light sensor for headlight control is lo­
cated in the rear view m irror mount. You
should therefore not apply any stickers to
the windsh ield in this area i n order to pre­
vent malfunctions or fail ures.

..... N
co ~ CX)
..... I.Cl U"I
..... I.Cl .....
-your vehicle is being towed by a tow truck or
if you are towing another vehicle behind
you .
Turn signal and high beam lever
The lever on the le~ side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher.
Fig. SO Tu rn signal and high bea m lever
The turn s ignal and high beam lever has the fol·
lowing functions:
Turn signals ¢¢
8 N
0
~ IXI
• Lift the lever up all the way¢ fig. 50 (D to use
t h e right turn s ignals, or push the lever down
all the way @to use the left turn signals .
Auto-blink
• Move the lever (up or down) just to the point of
resistance to use the turn signa ls for as long as
you need them, for example when changing lanes .
• Move the lever (up or down) just to the point of
resistance and then release it right away to
make the turn s ignals blink
three times. You
can use this feature for example when changing
l anes on highways.
High beam ~D
• Push the lever forward@ to switch on the high
beam.
• Pull the lever back towa rds yo u to switch off
the high beam .
Headlight flasher ~D
• Pull the lever toward the steering wheel© to
u se the head light flasher .
Lights and V ision
Notes on these features
-The turn signals only work w ith the ignition
turned on. The indicato r lights
II or II in the
instr ument cluster ¢
page 14 also blink.
- After you have turned a corner, the turn signa l
switches off automatically.
- The
high beam wo rks on ly when the headlights
are on. The indicator light
II in the instrument
cluster illuminates when the high beams are
on.
- The
headlight flasher works only as long as yo u
hold the lever· even if there are no lights
turned on . The indicator light
II in the instru­
ment cluster illuminates when you use the
headlight flasher .
A WARNING
-Do not use the high beam or head light flasher
i f you know that these could blind oncoming
traffic.
Interior lighting
Front /rear interior lights
_. --=:.
I-~~
._ -- v
8 G
o .. .. c
l
Fig. 51 Front head line r: in ter io r light ing cont rols
Fig. 52 Rear headliner: rear read ing lights
55

..... N
co ~ CX)
.....
"' U"I
.....
"' .....
Windshield wipers
Switching the windshield wipers on
Fig. S6 Windshield wiper lever
Fig. S7 Rea r w ipe r actuation
Move the windshield wiper lever to the corre·
spond ing pos ition:
@ · Windshield wiper off
(D · Interval mode. The windshield w iper auto­
matica lly activates when you drive 2 mph (4 km/
h ). The higher the sensitivity of the rain sensor is
set (switch @ to the right), the earlier the wind­
shield w ipers react to moisture on the wind·
shie ld. In some models, you can switch rain sen·
sor mode off and sw itch intermittent mode on in
the MMI* . Select:
!CARI function button> Car
sy stem s*
control button > Dri ver assist > Rain
s e nsor .
In inte rm ittent mode, yo u can adjust the
i nte rval time using the @switch.
@ · Slow wiping
® ·Fast wiping
@· Single wipe
® ·Clean the windshield . To e liminate water
d rople ts, the windshield wipe r perfo rms one af­
terwipe operat io n after several seconds while
d riving . You can switch this f unction off by mov-
Lights and V ision
ing the lever to posit ion ® within 10 seconds of
the afterwipe operation. The afterwipe function
is react ivated the next time the ignition is sw itch ­
ed on.
T he rear wiper automatically switches on when
t h e reverse gear is engaged and the front wind ·
shield wipers a re on and in ope ration.
Cleaning the headlights *. The headlight washer
system * operates only when the headlights are
on . If you move the lever to position ®, the
headlights are washed in interva ls.
@ ·W ipe the rear window. The rear w iper moves
about eve ry 4 seconds .
(!)-Clean the rear w indow . T he number of wip·
ing oper ations depends on how long the lever is
held in position 7.
_&. WARNING
-
- The rain sensor is on ly intended to ass ist the
d river. The drive r is st ill respons ible fo r
manually switch ing the wipers on according
to the visibility conditions.
- The win dshield may not be treated w ith wa­
ter-repelling w indshield coating agents. Un­
favorable condit ions, such as wet ness, dark·
ness, low su n, can result in increased glare.
W iper blade chatte r is also possib le.
- Properly functioning windshield wipe r
b lades are required for a clea r view and safe
driving.
(D Note
- In the case of frost, check w hether the
w indshield wiper blades are frozen to t he
w indshield . Switching on the w indshield
w ipers can damage the w iper blades!
- Pr ior to us ing a car wash , the w indshield
w iper system must be sw itched off (lever in
posi tion 0) . This helps to prevent un inten­
ti onal sw itch ing o n and dam age to the
w indshield wiper system.
(D Tips
- T he windshie ld w ipers are switched off
when the ignit io n is tu rned off. Act ivate the
w indshield wipe rs af ter the igni tion is .,.
57

Lights and Vi sion
switched back on by moving the windshield
wiper lever to any position .
- Worn or dirty windshield wiper blades result
in streaking. This can affect the rain sensor
function . Check your windshield wiper
blades regularly.
- The washer fluid nozzles of the windshield
washer system are heated at low tempera­
tures when the ignition is on .
- When stopp ing temporarily, e .g . at a traffic
light, the set speed of the windsh ield wipers
i s automatically reduced by one speed .
Cleaning windshield wiper blades
Clean the windshield wiper blades when they be­
gin to leave streaks . Use a soft cloth and g lass
cleaner to clea n the windshield wipe r blades .
Front wipe r
.,. Place the windshield wiper arms in the service
pos ition. Refer to¢
page 58.
.,. Lift the wiper arm away from the front window .
Rear wiper
.,. Lift the wiper arm away from the rear window .
A WARNING
Dirty windshield wiper blades can impair your
view. This can lead to accidents.
Replacing windshield wiper blades
F ig. 58 Remov ing the w ipe r blad e
Wiper servic e position /blad e re placem ent
po sit ion
"' ij
a: CX) ID
.,. Switch the ignition off and move the windsh ie ld
wiper lever to position @ ¢
page 57, fig. 56.
58
The windshie ld wipers move into the service po­
sition .
.,. To br ing the w ipers back into the origina l posi­
tion, switch the ignition on and press the wind­
shie ld w iper lever.
You can also turn the service position on or off in
the radio or MMI *:
.,. Switch the windshie ld w ipers off (posit ion @
¢page 57, fig. 56).
.,. Select:
!CAR I function button> Windshield
wiper s
> Servic e po sition > On /Off . Or
.,. Select :
!CAR I function button> Car system s*
control button > Ser vicing & ch eck s > Wiper
s ervi ce po sition
> On /Off .
Removing the wiper blade
.,. Lift the w indshield w iper arm up from the
w indshie ld .
.,. Press the locking knob@¢
fig. 58 on the w iper
blade. Ho ld the wipe r blade firmly .
.,. Remove the w iper blade in the direction of the
arrow .
Attaching the wiper blade
.,. Insert the new wiper blade into the mount o n
the wipe r arm @unt il you hear it latch into
place .
.,. Place t he w iper a rm back on the winds hield.
.,. Tur n the se rvice pos ition off.
A WARNING
F or your safety, you shou ld replace the wiper
b lades once or twice a year. See your author­
ized Audi dealer for replacement blades.
(D Note
- The windshie ld wiper blades must only be
replaced when in the service pos ition! Oth­
erwise, you r isk damaging the paint on the
hood or the w indshield wiper moto r.
- You should not move your vehicle or press
the windsh ield wiper lever when the wiper
arms are folded away from the windshie ld.
The windshie ld w ipers would move back in­
to their or iginal pos ition and could damage
the hood and w indshie ld .

..... N
co ~ CX)
..... I.Cl U"I
..... I.Cl .....
-To help prevent damage to the wiper sys ­
tem, a lways loosen blades which are frozen
to the windshield before operating wipers .
- To help prevent damage to wiper blades, do
not use gasoline, kerosene, paint thinner, or
other solvents on or near the wiper blades.
- To help prevent damage to the wiper arms
or other components, do not attempt to move the wipers by hand.
@ Tips
- Comme rcial hot waxes applied by automatic
car washes affect the how easi ly the glass
surface can be cleaned.
- You can also use the service position, for ex ­
ample, if you want to protect the windsh ield
from icing by using a cover.
Replacing the rear wiper blade
C
F ig . 59 Rea r w ip er: Remov ing t he wiper blade
Removing the wiper blade
.. Fold the windshield wiper arm away from the
windshield.
.. Pull the wiper blade and holder out of the
mount.
Attaching the wiper blade
.,. Press the wiper blade ho lder in the arrow direc­
tion ¢
fig. 59 into the mount.
.. Fold the windshield wiper arm back onto the
windshield .
.&_ WARNING
-
For safety reasons, the windsh ield wiper
blades should be replaced once or twice each
year .
Lights and V ision
Mirror
Adjusting the exterior mirrors
Fig. 60 Forwa rd sect io n of driver's armr est: powe r mirror
contro ls
Adjusting exterior mirrors
.,. Rotate the knob to the© posit ion (driver's ex­
t er ior mir ror) or to t he ® pos ition (passenger's
exterior mirror)¢
fig. 60.
.. Rotate the knob and the mirror so that you
have a clear view to the rear.
Heated mirrors
.,. Rotate the knob to pos it ion @.
Folding both exterior mirrors*
.. Turn the knob to position @.
Depend ing on the outside temperature, the mir­
ror surfaces are heated until the ignition is
switched off- even if the knob is no longer in po­
sition @.
You are well-advised to fold the exterior m irrors
in when maneuvering in tight spaces or when
leaving the car parked close to other veh icles.
Memory for exterior mirrors*
On vehicles with memory fo r the driver's seat, the
current setting for the exterior mirrors is auto­
matically stored along with the seat position
¢ page 65.
Tilt function for the passenger's mirror*
When the reverse gear is engaged, the mirror
surface tilts downward slightly if the setting is
for the passenger's mirror (knob in position®
¢
fig. 60). This allows you to see the curb during
parallel parking. ..,.
59