2015 VOLVO XC90 Owners Manual

NAVIGATION*
* Option/accessory, for more information, see Introduction.
431
Find the vehicle symbol on the map
Tap the crosshairs
After scrolling/zooming, it may be difficult to find the vehicle's location on the map. To find it:
• Tap the crosshairs: the map will be reset and will follow the vehicle symbol.
Change the headers displayed
Tap to change map headings
The following headers can be displayed on the map:
• Destination, Estimated Time of Arrival (ETA) or Remaining Time to Arrival (RTA)
or
• Position and the distance to the destination(Dist).
Changing headers is only possible with the map in maximized view.
Returning to the map view
Home button below the center display
To return to the map view from another part of the system:
1. Press the Home button.
2. If the center display shows its Home view, tap
Navigation at the top of the screen.
Related information
•Navigation in the instrument panel (p. 448)
• Sensus Navigation settings (p. 449)

NAVIGATION*
* Option/accessory, for more information, see Introduction.
432
Getting started with Sensus Navigation The vehicle's electrical system (including the navigation system) is activated automaticallywhen the driver's door is opened.
Navigation On/Off
OnIf the navigation system does not show a map on the center display, tap Navigation on the upper
line on the screen to display a map showing the area around the vehicle and the vehicle's currentlocation (a blue triangle) on the map.
WARNING
Observe the following.
• Direct all your attention to the road and make sure that all your concentration ison driving.
• Follow applicable traffic legislation anddrive with good judgment.
• Due to weather conditions or time of yearaffecting the road conditions, some rec-ommendations may be less reliable.
OffThe navigation system cannot be switched off while the vehicle is unlocked and is instead activein the background.
NOTE
The system can be used even when the engine is not running but will be switched offautomatically if the battery charge level is low.
Related information
• Navigation displays and controls (p. 433)
• Quick guidance to a destination (p. 432)
• Center display overview (p. 29)
• Using the center display (p. 46)
Quick guidance to a destination The following table provides quick information about setting a destination and starting naviga-tion.
Selecting a destination on the map
StepCenter dis- play/menuAction
1If a map is not shownon the cen-ter display.Press the Home button under the display toopen the display's Homeview.
2Home view is displayed.Tap Navigation in the
center display's upper menu bar.
3A map is displayed.
If this button is dis- played, tap it to maxi-mize the map.
4The map is displayed.Scroll to the desired location on the map andpress and hold thatposition on the screento set it as a destination.

NAVIGATION*
* Option/accessory, for more information, see Introduction.
433
StepCenter dis- play/menuAction
5Start navi- gation is
displayed on thescreen.Tap Start navigation.
6A map showingthe route toyour desti-nation isdisplayed.Guidance will begin. Fol- low the directions on theinstrument panel.
Related information
• Using the center display (p. 46)
• Center display overview (p. 29)
Navigation displays and controls
Volvo Sensus Navigation is presented on the instrument panel and head-up display * and con-
trolled using center display on-screen buttons, the right-side steering wheel keypad and voicecommands.
Center display
Searching for and setting destinations and mak- ing navigation settings are done on the centerdisplay. If the map is not showing on the center display, tap
Navigation at the top of the center display's
Home view.
Instrument panel
During a trip, the driver receives visual guidance on the instrument panel and voice guidancethrough the infotainment system's speakers.
Right-side steering wheel keypad and instrument panel
Some of the navigation system's functions, such as Take me home, are controlled from the right-
side steering wheel keypad.

NAVIGATION*
* Option/accessory, for more information, see Introduction.
434
Open/Close
Left/Right
Up/Down
Confirm
Opening/closing the menu
–Press Open/Close (1).
> Menus with alternatives will be opened or
closed. The menu will close automatically after a short period or after certain selec-tions have been made.
Navigating and making selections in a menu
1. Scroll among the alternatives using control (3). 2. Confirm or mark a choice by pressing control
(4).
> The function will be activated and aftermaking certain choices, the menu will close.
Head-up-display (HUD) *
Navigation guidance on the windshield
The driver can also get guidance and information from the navigation system on the lower sectionof the windshield. The position of the HUD can be adjusted (see the article "Head-up display").
Voice controlMany settings can be madeusing voice commands. Press the voice button on the right-side steering wheel key-pad, wait for the tone and then say, e.g., "Drive
Home."
Using voice commands is explained in greater detail in the articles "Navigation system voicecontrol," "Voice control," and "Voice control set-tings."
Related information
•Using the center display keyboard (p. 32)
• Setting a destination by entering the text of your choice (p. 436)
• Navigation system voice commands (p. 124)
• Voice control (p. 120)
• Using voice commands (p. 121)
• Voice control settings (p. 125)
• Using the center display (p. 46)
• Center display overview (p. 29)
• Head-up display (HUD)
* (p. 117)

NAVIGATION*
* Option/accessory, for more information, see Introduction.
435
Entering a destination
There are several different ways of choosing a destination.
A destination can be chosen by:
• Clicking on the map
• Entering free text or coordinates
• Selecting a recently set destination
• Selecting a position marked as a favorite from the library
• Selecting a saved destination from the library
• Selecting a point of interest (POI)
• Entering an Address: e.g., State/city/street/intersection/house number
Select one of the alternatives and follow the instructions given.
Destinations and intermediate destinations (waypoints)
The first location selected will be the itinerary's final destination .
Any other locations will be the itinerary's inter-
mediate destinations (waypoints) .
An itinerary and its destinations can be edited at any time, see also the section "Editing an itiner-ary" in the article "Itinerary and alternate routes."
Related information
• Viewing the itinerary and alternate routes (p. 442)
• Setting a destination by tapping the map(p. 435)
• Setting a destination by entering the text ofyour choice (p. 436)
• Setting a destination using Recent/Favor-ites/Library (p. 438)
• Using a point of interest (POI) as a destina-tion (p. 440)
• Setting a destination by entering an address(p. 441)
Setting a destination by tapping the map
Tapping a point on the map is one way to set a destination.
To do so:
Begin by verifying that the map is in full-screen mode by tap-ping the symbol (if it is dis-played).
1. Scroll to the desired point on the map.
2. Press the point until an icon is created thereand a menu is displayed.
3. Select Go here to start guidance to that point.
Deleting the icon
Tap Delete.

NAVIGATION*
* Option/accessory, for more information, see Introduction.
436
Changing the icon's locationPress the icon on the map, drag it to the desired position and release it.
Related information
• Entering a destination (p. 435)
Setting a destination by entering the text of your choice
Entering the text of your choice is one way to set a destination.
KeyboardThe center display's keyboard can be used to enter most characters when searching for a des-tination.
To display the keyboard: Tap
Set dest. in the lower
margin. The keyboard opens for entering text.
Keyboard function keys
Filter: limit/filter the list of possible destina- tions.
Hide the keys to display a longer list of pos- sible destinations. Tap the field for enteringtext to return to the keyboard.
Tap to toggle between upper and lower case characters.
Numbers and special characters
Space bar
Delete characters to the left of the cursor.
Tap to display an area where you can "write" text.
For additional information about using the centerdisplay's keyboard, see the article "Using thecenter display keyboard."

NAVIGATION*
* Option/accessory, for more information, see Introduction.
437
Entering the text of your choiceEnter text to search for e.g., streets, cities, map coordinates or points of interest (POIs).
1. Enter a word. Possible destinations meeting
your search criteria will be listed according to their distance from the vehicle symbol on the map (or from the center of the map if it hasbeen scrolled).
2. Select/mark a selection in the list. Its
Info
card1 will be displayed.
3. Follow the instructions on the center display and activate guidance to the destination.
FilterSeveral filters can be used to limit the size of the list.
Filters
The filters available may vary:
•
Along route: Lists only destinations found
along the route.
•
Streets: Lists only streets/roads meeting
the search criteria.
•
Only cities: Lists only cities/towns meeting
the search criteria.
Filter for POIsA list of available POIs is displayed at the bottom of the screen, under the three filters.
POIs filtered from the marked category (2)
POI categories (there may also be sub-cate- gories).
Only POIs from the marked category will be listed and only the
Along route filter can be combined
with POI.
1 See also the article "Information cards on the map."

NAVIGATION*
* Option/accessory, for more information, see Introduction.
438
CoordinatesA destination can also be set by entering its map coordinates.
• For example, enter: "N 58.1234 E 12.5678" and tap
Search/.
Map coordinates can be written in different ways, such as:
N 58.1234 E 12.5678 (with spaces)
N 58.1234 E12.5678 (without spaces)
58.1234 N 12.5678 E (with the points on the
compass after the coordinates)
58.1234 -12.5678 (with a hyphen without the
points on the compass)
Both periods [.] and commas [,] can be used.
Related information
• Entering a destination (p. 435)
• Navigation displays and controls (p. 433)
• Using the center display keyboard (p. 32)
• Information cards on the map (p. 446)
Setting a destination using Recent/ Favorites/Library Selecting from a list is one way of setting a des- tination.
To display these lists:
1. Tap
Set dest. in the lower
margin. A keyboard will be dis- played with search alternativesin the upper margin. 2. Continue by selecting one of the lists in the upper margin:
•Recent
•Favorites
•Library
After marking an alternative, it will be added as a destination by tapping the Start navigation orAdd as waypoint buttons.
Recent
This is a list of all searches that have been made. Scroll through the list and select. This menu alternative is also available in the instrument panel and can be displayed using theright-side steering wheel keypad (see also thearticle "Navigation system displays and controls").