2015 TOYOTA HILUX child restraint

751-1. For safe use
1
For safety and security
HILUX_OM_OM0K219E_(EE)
Installing child restraints
2-point type seat belt (if equipped)
3-point type seat belts (An ELR
belt requires a locking clip)
Follow the child restraint system manufacturer’s instructions.
Firmly secure child restraints to the seats using a seat belt.
HILUX_OM_OM0K219E_(EE).book Page 75 Wednesday, May 14, 2014 3:06 PM

761-1. For safe use
HILUX_OM_OM0K219E_(EE)■
Forward-facing
 Child seat
Place the child restraint sys-
tem on the rear seat facing
the front of the vehicle.
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
While pushing the child
restraint system down into
the seat, allow the belt to
tighten by pulling its free end
until the child restraint sys-
tem is securely in place.
Installing child restraints using a seat belt (2-point type seat belt)
(if equipped)
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 76 Wednesday, May 14, 2014 3:06 PM

771-1. For safe use
1
HILUX_OM_OM0K219E_(EE)
For safety and security
■Rear-facing  Baby seat/child seat
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Keep the
lap portion of the belt tight.
Install a locking clip near the
plate of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip.
Installing child restraints using a seat belt (3-point type seat belt)
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 77 Wednesday, May 14, 2014 3:06 PM

781-1. For safe use
HILUX_OM_OM0K219E_(EE)■
Forward-facing
 Child seat
Place the child restraint sys-
tem on the seat facing the
front of the vehicle.
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Keep the
lap portion of the belt tight.
Install a locking clip near the
plate of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip.
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 78 Wednesday, May 14, 2014 3:06 PM

791-1. For safe use
1
HILUX_OM_OM0K219E_(EE)
For safety and security
■Junior seatPlace the child restraint sys-
tem on the seat facing the
front of the vehicle.
Sit the child in the child
restraint system. Fit the seat
belt to the child restraint sys-
tem according to the manu-
facturer’s instructions and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Check that the shoulder belt is
correctly positioned over the
child’s shoulder and that the lap
belt is as low as possible.
(→ P. 46)
1
2
HILUX_OM_OM0K219E_(EE).book Page 79 Wednesday, May 14, 2014 3:06 PM

801-1. For safe use
HILUX_OM_OM0K219E_(EE)
2-point type seat belt (if
equipped): Push the buckle
release button.
3-point type seat belt: Push the
buckle release button and fully
retract the seat belt.
■When installing a child restraint system in the seat with ELR belt
You need a locking clip to install the child restraint system. Follow the instruc-
tions provided by the manufacturer of the system. If your child restraint sys-
tem does not provide a locking clip, you can purchase the following item from
any authorized Toyota dealer or re pairer, or another duly qualified and
equipped professional.
Locking clip for child restraint system
(Part No. 73119-22010)
Removing a child restraint installed with a seat belt
HILUX_OM_OM0K219E_(EE).book Page 80 Wednesday, May 14, 2014 3:06 PM

811-1. For safe use
1
HILUX_OM_OM0K219E_(EE)
For safety and security
CAUTION
■When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of a sudden
braking, sudden swerving or an accident.
●Double-cab models: If the driver’s seat
interferes with the child restraint system
and prevents it from being attached cor-
rectly, attach the child restraint system
to the right-hand rear seat (left-hand
drive vehicles) or the left-hand rear seat
(right-hand drive vehicles).
●
Double-cab models: Adjust the front
passenger seat so that it does not inter-
fere with the child restraint system.
●
Vehicles with SRS front passenger air-
bag: Only put a forward-facing child
restraint system on the front seat when
unavoidable. When installing a forward-
facing child restraint on the front pas-
senger seat, move the seat as far back
as possible (vehicles with seat position
adjustment lever). Failure to do so may
result in death or serious injury if the air-
bags deploy (inflate).
HILUX_OM_OM0K219E_(EE).book Page 81 Wednesday, May 14, 2014 3:06 PM

821-1. For safe use
HILUX_OM_OM0K219E_(EE)
CAUTION
■When installing a child restraint system
●Vehicles with SRS front passenger air-
bag: Never use a rear-facing child
restraint system on the front passenger
seat.
The force of the rapid inflation of the
front passenger airbag can cause
death or serious injury to children in the
event of an accident.
●
Extra-cab models: Do not install a child
restraint system on the rear seat. These
seats are not designed to hold a child
restraint system.
●
Double-cab models: Do not install a
rear-facing child restraint system in the
rear center position. This seat position
is not designed to hold a rear-facing
child seat. Otherwise, the child or front
seat occupant(s) may be killed or seri-
ously injured in the event of sudden
braking, sudden swerving or an acci-
dent.
HILUX_OM_OM0K219E_(EE).book Page 82 Wednesday, May 14, 2014 3:06 PM