4366-3. Do-it-yourself maintenance
HILUX_OM_OM0K219E_(EE)
CAUTION
■Replacing light bulbs
● Turn off the lights. Do not attempt to replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may cause burns.
● Do not touch the glass portion of t he light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth
to avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
● Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
● Do not attempt to repair or disassemble light bulbs, connectors, electric
circuits or component parts.
Doing so may result in death or serious injury due to electric shock.
■ To prevent damage or fire
● Make sure bulbs are fully seated and locked.
● Check the wattage of the bulb before installing to prevent heat damage.
HILUX_OM_OM0K219E_(EE).book Page 436 Wednesday, May 14, 2014 3:06 PM
4837-2. Steps to take in an emergency
7
When trouble arises
HILUX_OM_OM0K219E_(EE)
The coolant level is satisfactory if it is between the upper and lower
lines on the reservoir.Reservoir
Upper line
Lower line
Radiator cap (if equipped)
Add engine coolant if necessary. ( →P. 508)
Water can be used in an emergency if engine coolant is unavailable.
4
1
2
3
4
XGasoline engine XDiesel engine
5
XGasoline engine XDiesel engine
HILUX_OM_OM0K219E_(EE).book Page 483 Wednesday, May 14, 2014 3:06 PM
