2015 SKODA CITIGO ignition

General information
Important information
Introductory information
Please read the Owner's Manual for this Radio Funky (hereinafter referred to solely as "device") carefully, because operation in accordance with these in-
structions is a prerequisite for proper use of the device.
These operating instructions describe all possible equipment variants without
identifying them as special equipment, model variants or market-dependent
equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-
nents described in these operating instructions.
The scope of equipment of your vehicle relates to your purchase contract for the vehicle. More information is available from the ŠKODA Partner 1)
where you bought
the vehicle.
Please note that these instructions are meant only as an addendum to the infor-
mation provided in your vehicle's owner's manual. Therefore, they can be used
only in conjunction with the latest manual for this vehicle. For a detailed descrip-
tion of some of the functions listed in these instructions, see the owner's manual
for your vehicle.
If you have any questions about your radio navigation system, please contact a
ŠKODA Partner.
The illustrations can differ in minor details from your radio navigation system;
they are only intended for general information.

Device operation
The device should only be used when traffic conditions permit safe use.
WARNING■ Concentrate fully at all times on your driving! As the driver, you are fully re-
sponsible for the operation of your vehicle.■
Only use the device in a way that ensures that you are in full control of your
vehicle in every traffic situation - there is a risk of accidents occurring!
■
Adjust the volume to ensure that acoustic signals from outside the vehicle,
e.g. sirens from vehicles to give way to, such as the police, ambulance and fire
brigade , can be heard at all times.
■
High volumes can cause hearing damage.

Care of the Display
CAUTION
■ Do not use solvents such as benzine or turpentine, which may damage the dis-
play surface.■
Treat the display with care, as finger pressure or contact with sharp objects may
cause dents and scratches on the surface.
Note
The display can be cleaned with a soft cloth and alcohol, if necessary.
Anti-theft protection
The anti-theft coding of your device prevents operation of the system following a
voltage interruption, e.g. during a vehicle repair or following theft. After discon-
necting the battery, disconnecting the radio from the on-board voltage of the ve- hicle and after a fuse failure, the code must be entered before the vehicle can be
used again.
Enter code
›
Switch on the radio with the ignition turned on. SAFE is displayed and then
1000 .
›
Use the selection buttons 1 - 4
11
to enter the safety code.
›
Confirm the safety code by pressing the selection button 6
11
for a longer peri-
od. 
1)
Explanation of terms
» Owner's Manual , chapter Foreword .
2General information

Code number
The code number can only be called up “online” via the ŠKODA system, as this
guarantees even more effective anti-theft protection. In this case you will have to call on a specialist 1)
garage.
Incorrect code number
If an incorrect code is confirmed after entry of the code, the procedure can be re-
peated once again . The number of attempts is shown in the bottom screen line.
If the code is entered incorrectly a second time, the unit will be blocked for ap- prox. one hour. It is only possible to enter the safety code again after one hourhas expired if both the device and the ignition have stayed turned on during thattime.
If two invalid attempts are then made again, the unit will be blocked again for an hour.
The cycle - two attempts, blocked for an hour - will continue to apply.
Note
The code is normally stored in the instrument cluster. This ensures that it is auto-
matically decoded (convenience coding). Manual input of the code is normally not necessary.
Device specification and operation
Equipment overview
Fig. 1
Equipment overview

- Setting up button
› for switching the equipment on and off (press)
› for volume adjustment of audio source currently being played (turn)
Settings knob
› for activating the Scan function
› for settings in the individual modes
› Changing to the previous/next title
RADIO
- Radio operation
MEDIA - MEDIA operation
TP - switches traffic programme on/off
MENU - Setting of the special functions
 and  - buttons for moving forwards/backwards
› RADIO-Mode
- for the selection of the stations from the preset list.
› MEDIA-Mode
- for the selection of the previous or following track.
› MENU-Mode
- for setting the setpoints of special functions
CD case 
- Eject a CD 
1234567891)
Explanation of terms
» Owner's Manual , chapter Foreword .
3General information

 - Sound settings
Function keys
› Save and select radio stations
› Enter code
AUX input - Attach an external audio source
Switching the unit on and off
›
To switch the device on and off, press setting button
1
.
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the device will switch off automatically.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery).

Volume setting
›
To increase the volume, turn button
1
clockwise.
›
To decrease the volume, turn button
1
counter-clockwise.
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will
appear in the display 
.
CAUTION
High volumes can cause hearing damage.
Sound settings
By pressing the button again 
select the setting desired.
■ TRE - Treble setting
■ BAS - Bass setting
■ BAL - setting of the volume ratio between the left and the right side
■ FAD - setting of the volume ratio between the front and the rear
101112MENU mode
SCN (scan) function
Press menu button
2
or the MENU button and then the function button
SCN .
The auto-play function starts and plays each station in the current frequency
band for about five seconds.
Press the menu button
2
or the function button SCN again to stop automatic
playing of the radio station you are currently listening to.

Function AS
Press the MENU
button and then the function button
AS .
An automatic station finding is started during which the 6 stations with the
strongest signal in the memory level FM1 and/or AM1 are stored. AM1 nebo DA1.

UPD function
Press the MENU
button and then the function button
UPD
This starts an automatic update of the radio station and the stations with the strongest signal are re-stored at the FM1, AM1 or DA1 storage levels.

Setting special functions
Press the MENU
button and then the function button
SET .
■ SKM (SEEK MODE) - automatic station finding
■ ALL - stops the station finding at all available stations
■ PRESET - stops the station finding only at the stored stations
■ VOL - adjusts the volume when the device is turned on
■ GALA - speed-sensitive volume adjustment
■ DIS - sets the display backlight
■ PHONE - outputs telephone calls via the onboard loudspeakers
■ PDC - sets the reduction of the volume when the park distance control is active
■ PDC VOL ATTENU 0 - no volume limit
■ PDC VOL ATTENU 1 - medium level volume limit 
4General information