2015 Peugeot RCZ warning light

80
RCZ_en_Chap04_visibilite_ed01-2015
AUTOMATIC GUId E - ME - HOME
LIGHTING
Operating fault
In the event of a malfunction of the sunshine sensor, the
lighting comes on, this warning lamp is displayed in the
instrument panel and/or a message appears in the screen,
accompanied by an audible signal.
Contact

a

PEUGEOT

dealer or a qualified workshop.
In

fog

or snow, the sunshine sensor may detect sufficient light. In
this case, the lighting will not come on automatically

.
Do not cover the sunshine sensor, coupled with the rain sensor
and located in the centre of the windscreen behind the rear view
mirror; the associated functions would no longer be controlled. When the automatic illumination of headlamps function is activated
(lighting control stalk in the "
AUTO" position), under low ambient light
the dipped beams headlamps come on automatically when the ignition
is switched off.
Programming
Activation or deactivation, as well as the duration of the guide-me-home\

lighting, is set in the vehicle configuration menu.

82
RCZ_en_Chap04_visibilite_ed01-2015
DIRECTIONAL LIGHTING
When the dipped or main beam headlamps are on, this function enables
the light beams to provide improved lighting of the side of the road when
cornering.
The use of this function, from approximately 12 mph (20 km/h) and
associated with the xenon headlamps only, considerably improves the
quality
of your lighting when cornering.
with directional lighting
without directional lighting
PROGRAMMING
O
PERATING
F
AULT
When stationary or moving at very low speed or when reverse
gear is engaged, the function is inactive.
The status of the function remains in the memory when the
ignition is switched off.If
a fault occurs, this warning lamp flashes in the instrument
panel, accompanied by a message in the screen.
Contact

a PEUGEOT

dealer or a qualified workshop.
The function is activated or deactivated via the vehicle
configuration menu.

87
RCZ_en_Chap05_securite_ed01-2015
DIRECTION INDICATORS
If you forget to cancel the direction indicators for more than
twenty seconds, the volume of the audible signal will increase if
the speed is above 40 mph (60 km/h).
F

Left: lower the lighting stalk passing the point of resistance.
F


Right: raise the lighting stalk passing the point of resistance.
HAZARD WARNING LAMPS
A visual warning by means of the direction indicators to alert other road\

users to a vehicle breakdown, towing or accident.
F Press
this button, the direction indicators flash.
They can operate with the ignition off.
AUTOMATIC OPERA TION OF HAZAR d
W

ARNING LAMPS *
When braking in an emergency, depending on the deceleration, the
hazard warning lamps come on automatically.
They
switch off automatically the first time you accelerate.
F

Y
ou can also switch them off by pressing the button.
Deactivating the DSC/ASR systems also deactivates the automatic
operation of the hazard warning lamps; refer to the "Trajectory control
systems - Deactivation" section.
* Except for the 1.6 THP 270 hp version.
Three flashes of the direction indicators
F Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times.
5/
SAFETY

89
RCZ_en_Chap05_securite_ed01-2015
BRAKING ASSISTANCE SYSTEMS
Group of supplementary systems which help you to obtain optimum
braking in complete safety in emergency situations:
-
anti-lock braking system (ABS),
-


electronic brake force distribution (EBFD),
-


emergency braking assistance (EBA).
ANTI-LOCK BRAKING SYSTEM AN d
ELECTRONIC

BRAKE FORCE d ISTRIBUTION
Linked systems which improve the stability and manoeuvrability of your
vehicle when braking, in particular on poor or slippery surfaces.
Activation
The anti-lock braking system comes into operation automatically when
there is a risk of wheel lock.
Normal operation of the ABS may make itself felt by slight vibration of
the brake pedal.
When
braking in an emergency, press very firmly without releasing
the pressure.
Operating fault
If this warning lamp comes on, accompanied by an audible
signal and a message in the screen, it indicates a malfunction
of the anti-lock braking system which could result in loss of
control of the vehicle when braking. If this warning lamp comes on, together with the
STOP and
ABS warning lamps, accompanied by an audible signal and
a message in the screen, it indicates a malfunction of the
electronic brake force distribution which could result in loss of contro\
l of
the vehicle when braking.
You must stop as soon as it is safe to do so.
In either case, contact a PEUGEOT

dealer or a qualified workshop.
When replacing wheels (tyres and rims), ensure that they conform
to the manufacturer's recommendations.
When braking in an emergency, press firmly without releasing the
pressure.
EMERGENCY BRAKING ASSISTANCE
System which, in an emergency, enables you to obtain the optimum
braking
pressure more quickly, thus reducing the stopping distance.
Activation
It is triggered by the speed at which the brake pedal is pressed.
The effect of this is a reduction in the resistance of the pedal and an
increase
in braking efficiency.
5/
SAFETY

92
RCZ_en_Chap05_securite_ed01-2015
ACTIVE BONNET
Operating fault
The active bonnet has been designed to maximise the safety of
pedestrians in the event of an impact with the front of the vehicle.The deployment of the active bonnet is accompanied by a slight
emission of harmless smoke and a noise, due to the activation
of the pyrotechnic cartridge integrated in the system. The airbag
warning lamp comes on.
After deployment, close the bonnet by pressing on the hinges.
Go
to the nearest PEUGEOT

dealer or a qualified workshop at a
maximum speed of 20 mph (30 km/h). This system can only operate once. If a second impact occurs
(during

the same or a subsequent accident), the active bonnet will
not operate.
After an accident or theft of the vehicle, have the system checked.
Do not handle the pyrotechnic systems, located under the bonnet
near the struts: risk of explosion.
All work on this system must be carried out only by the skilled
personnel

of a PEUGEOT

dealer or a qualified workshop.
If this warning lamp comes on on the instrument panel,
accompanied by an audible signal and a message in the
screen,
contact a PEUGEOT

dealer or a qualified workshop to
have the system checked.

The active bonnet may no longer
be deployed in the event of an impact.

98
RCZ_en_Chap05_securite_ed01-2015
The driver must ensure that passengers use the seat belts
correctly and that they are all restrained securely before setting
off.
Wherever you are seated in the vehicle, always fasten your seat
belt, even for short journeys.
Do not interchange the seat belt buckles as they will not fulfil their
role fully

.
The
seat belts are fitted with an inertia reel permitting automatic
adjustment of the length of the strap to your size.

The seat belt is
stowed automatically when not in use.
Before and after use, ensure that the seat belt is reeled in
correctly.
The lower part of the strap must be positioned as low as possible
on the pelvis.
The upper part must be positioned in the hollow of the shoulder.
The
inertia reels are fitted with an automatic locking device which
comes into operation in the event of a collision, emergency
braking or if the vehicle rolls over

. You can release the device
by
pulling the strap firmly and then releasing it so that it reels in
slightly

.
In order to be effective, a seat belt must:
-

be tightened as close to the body as possible,
-


be pulled in front of you with a smooth movement, checking
that it does not twist,
-


be used to restrain only one person,
-


not bear any trace of cuts or fraying,
-

not be converted or modified to avoid affecting its
performance. In accordance with current safety regulations, for all repairs on your
vehicle's

seat belts, go to a qualified workshop with the skills and
equipment

needed, which a PEUGEOT

dealer is able to provide.
Have your seat belts checked regularly by a PEUGEOT dealer or a
qualified
workshop, particularly if the straps show signs of damage.
Clean the seat belt straps with soapy water or a textile cleaning
product, sold by PEUGEOT dealers.
After folding or moving a seat or rear bench seat, ensure that the
seat belt is positioned and reeled in correctly.
Recommendations for children
Use a suitable child seat if the passenger is less than 12 years old or \
shorter than one and a half metres.
Never use the same seat belt to secure more than one person.
Never allow a child to travel on your lap.
For more information, refer to the "Child seats" section.
In the event of an impact
depending on the nature and seriousness of the impact , the
pretensioning device may be deployed before and independently
of the airbags. Deployment of the pretensioners is accompanied
by a slight discharge of harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge incorporated in the system.
In all cases, the airbag warning lamp comes on.
Following an impact, have the seat belts system checked, and if
necessary
replaced, by a PEUGEOT

dealer or a qualified workshop.

11 8
RCZ_en_Chap06_conduite_ed01-2015
ELECTRONIC ENGINE IMMOBILISER
The key contains an electronic chip which has a special code. When
the ignition is switched on, this code must be recognised in order for
starting to be possible.
A few minutes after the ignition is switched off, this electronic engine
immobiliser locks the engine management system and prevents starting
of the engine by anyone who does not have the key.In the event of a malfunction, you are informed by lighting of this
warning lamp, an audible signal and a message in the screen.
In this case, your vehicle does not start; contact a PEUGEOT
dealer as soon as possible.
Key left in the "Ignition on" position
On opening the driver's door, an alert message is displayed,
accompanied by an audible signal, to remind you that the key is
still in the ignition switch at position 1 (Stop).
If the key has been left in the ignition switch at position 2 (Ignition
on), the ignition will be switched off automatically after one hour.
To switch the ignition back on, turn the key to position 1 (Stop),
then back to position 2 (Ignition on).

180
RCZ_en_Chap08_info-pratiques_ed01-2015
Fuse N° RatingFunctions
F13 5 AEngine fusebox, active bonnet.
F14 15 AMultifunction screen, seat belt and
passenger's front airbag warning lamps
display, instrument panel screen,
amplifier,
Bluetooth system, parking
sensors control unit, USB Box.
F15 30 ALocking and deadlocking.
F17 40 ARear screen and door mirrors demist/
defrost.
Fuse N° Rating Functions
G36 30 AHi-Fi

amplifier.
G37 30 APassenger's seat memory unit.
G38 30 ADriver's seat memory unit.
G39 5 ALighting memory unit.
G40 30 ADriver and passenger heated seats.
Box 2