2015 Peugeot RCZ parking brake

122
RCZ_en_Chap06_conduite_ed01-2015
"PORSCHE TIPTRONIC SYSTEM"
AUT
OMATIC GEARBO x
GEAR SELECTION GA TE
1. Gear selector.
2. Button "S" (sport).
3.

Button "
T" (snow).
GEAR SELECTOR POSITIONS
P. Park.
-
Immobilisation of the vehicle, parking brake on or of
f.
-

Starting the engine.
R.

Reverse.
-

Reversing manoeuvres, vehicle stationary
, engine at idle.
N. Neutral.
-

Immobilisation of the vehicle, parking brake on.
-


Starting the engine.
d

. Automatic operation.
M. + / -
Manual

operation with sequential changing of the six gears.
F

Press forwards to change up through the gears.
or
F


Press rearwards to change down through the gears.
Six speed automatic gearbox which of

fers a choice between the comfort
of fully automatic operation, enhanced by sport and snow programmes,
or manual gear changing.
There are two driving modes:
-

automatic

operation for electronic management of the gears by
the gearbox, with the sport programme for a more dynamic driving
style or the snow programme to facilitate driving when grip is poor.
-

manual


operation

for

sequential

changing

of

the

gears

by

the

driver

.

3
3
123
RCZ_en_Chap06_conduite_ed01-2015
dISPLAYS IN THE INSTRUMENT PANEL
When you move the gear selector in the gate to select a position, the
corresponding symbol is displayed in the instrument panel.
P. Park
R. Reverse
N. Neutral
d

1... d 6. Drive (Automatic driving)
S. Sport programme
T. Snow programme
M1... M6.


Manual (Sequential driving)
-. Invalid value during manual operation
MOVING OFF
F Apply the parking brake.
F
Select position P

or N.
F

Start the engine.
If this procedure

is not followed, there is an audible signal, accompanied
by a message in the screen.
F

With the engine running, press the brake pedal

.
F

Release the parking brake.
F


Select position R

, d or M,
F

Gradually release the brake pedal.
The vehicle then moves of

f.
If position N is engaged inadvertently while driving, allow the
engine to return to idle then engage position
d

to accelerate.
When the engine is running at idle, with the brakes released, if
position R,
d or M is selected, the vehicle moves even without the
accelerator being pressed.
When the engine is running, never leave children in the vehicle
without supervision.
When carrying out maintenance with the engine running, apply the
parking brake and select position P.
A message is displayed if you try to move the gear selector from
position
P without pressing the brake pedal.
6/
DRIVING

125
RCZ_en_Chap06_conduite_ed01-2015
It is only possible to change from one gear to another if the vehicle
speed and engine speed permit; otherwise, the gearbox will operate
temporarily in automatic mode.M and the gears engaged manually appear in succession in
the instrument panel.
If the engine speed is too low or too high, the gear selected
flashes
for a few seconds, then the actual gear engaged is
displayed.
It is possible to change from position
d

(automatic) to position M
(manual) at any time.
When the vehicle is stationary or moving very slowly, the gearbox
selects gear M1 automatically.
The sport and snow programmes do not operate in manual mode.
Invalid value during manual operation
This symbol is displayed if a gear is not engaged correctly
(selector between two positions).
STOPPING THE VEHICLE
Before switching off the engine, you can engage position P or N to
place the gearbox in neutral.
In both cases, apply the parking brake to immobilise the vehicle. If the selector is not in position P, when the driver's door is opened
or approximately 45 seconds after the ignition is switched off,
there is an audible signal accompanied by a message.
F

Return the selector to position
P
; the audible signal stops and
the message disappears.
OPERATING F AULT
When the ignition is on, the illumination of this warning lamp,
accompanied by an audible signal and a message in the
screen, indicates a gearbox malfunction.
In this case, the gearbox switches to emergency mode and is locked in
3rd gear. You may feel a substantial knock when changing from P to R
and from N to R. This will not cause any damage to the gearbox.
Do not exceed a speed of 60 mph (100 km/h), local speed restrictions
permitting.
Have

it

checked by a PEUGEOT

dealer or a qualified workshop.
This warning lamp may also come on if a door is opened.
There is a risk of damage to the gearbox:
-

if you press the accelerator and brake pedals at the same
time,
-


if you force the selector from position P

to another position
when
the battery is flat.
To reduce fuel consumption during a long period stationary with
the

engine running (traffic jam, etc.), place the gear selector in
position N

and apply the parking brake.
6/
DRIVING

149
RCZ_en_Chap07_verifications_ed01-2015
MANUAL GEARBOX
A

UTOMATIC
GEARBOX
B

RAKE PA d SB RAKE d ISC WEAR
The gearbox does not require any maintenance
(no oil change).
Refer to the manufacturer's service schedule for the
checking interval for this component.
The
gearbox does not require any maintenance

(no oil change).
Refer to the manufacturer's service schedule for details of
the level checking interval for this component.
Brake wear depends on the style of driving, particularly in
the case of vehicles used in town, over short distances.
It may be necessary to have the condition of the brakes
checked, even between vehicle services.
Unless


there is a leak in the circuit, a drop in the brake fluid level
indicates that the brake pads are worn. For information on checking brake disc wear

, contact a
PEUGEOT dealer or a qualified workshop.
Only use products recommended by PEUGEOT or products of
equivalent
quality and specification.
In order to optimise the operation of units as important as those
in
the braking system, PEUGEOT

selects and offers very specific
products.
After washing the vehicle, dampness, or in wintry conditions, ice
can

form on the brake discs and pads: braking efficiency may
be reduced. Make light brake applications to dry and defrost the
brakes.
PARKING BRAKE
If excessive travel or a loss of effectiveness of this system
is noticed, the parking brake must be checked, even
between two services.
Checking this system must be done by a PEUGEOT

dealer
or
a qualified workshop.
7/
CHECKS

157
RCZ_en_Chap08_info-pratiques_ed01-2015
CHANGING A WHEEL
Parking the vehicle
Immobilise the vehicle where it does not block traffic: the ground must be level, stable and non-slippery ground.
Apply the parking brake, switch off the ignition and engage first
gear (position P

for the automatic gearbox) to lock the wheels.
Check
that the parking brake indicator lamps are on fixed (not
flashing)

in the instrument panel.
It is imperative that you ensure that the occupants get out of the
vehicle and wait where they are safe.
If necessary, place a chock under the wheel diagonally opposite
the wheel to be changed.
Never go underneath a vehicle raised using a jack; use an axle
stand.
Security socket: for adaptation of the
wheelbrace to the special "security" bolts.
Specific

to

your

vehicle,

it

is

stored

in

the

glove box.
Wheelbrace:


for

removal

of

the

wheel

fixing

bolts.
j

ack with integrated handle: for lifting the
vehicle.
TOOLS REQUIRE d*
Bolt cover removal tool: for removal of the
bolt
finishers (covers) on alloy wheels.
*

Depending


on

the

country of sale, the vehicle may be equipped with
the tools needed to change a wheel and a spare wheel (see following
pages). Do not use:
-


the jack for any purpose other than lifting the vehicle,
-


a jack other than the one supplied with the vehicle.
If the jack supplied with the vehicle is not present, contact a
PEUGEOT


dealer or a qualified workshop to obtain the jack
defined

for the vehicle by the manufacturer.
8/
PRACTICAL INFORMATION

162
RCZ_en_Chap08_info-pratiques_ed01-2015
SNOW CHAINS
Original tyre sizeMaximum link size.
235/45 R18 cannot
be fitted with chains
235/40 R19
225/45 R18 9 mm
For more information on snow chains, contact a PEUGEOT dealer or a
qualified

workshop.
Use

only

the chains designed to be fitted to the type of wheel fitted to
your vehicle:The


snow chains must be fitted only to the front wheels.
They

must


never be fitted to "space-saver" type spare wheels.
Take account of the legislation in force in your country on the use
of snow chains and the maximum running speed authorised. Avoid driving with snow chains on roads that have been cleared
of snow, to avoid damaging your vehicle's tyres and the road
surface.
If your vehicle is fitted with alloy wheels, check that no
part

of the chain or its fixings is in contact with the wheel rim.
In wintry conditions, snow chains improve traction as well as the
behaviour of the vehicle when braking.
Advice on installation
F If you have to fit the chains during a journey, stop the vehicle on a flat
surface on the side of the road.
F

Apply the parking brake and position any wheel chocks to prevent
movement of your vehicle.
F


Fit the chains following the instructions provided by the
manufacturer

.
F

Move of
f gently and drive for a few moments, without exceeding
30
mph (50 km/h).
F

Stop your vehicle and check that the snow chains are correctly
tightened.
It is strongly recommended that before you leave, you practise
fitting

the snow chains on a level and dry surface.

165
RCZ_en_Chap08_info-pratiques_ed01-2015
12 V BATTERY
The battery is located under the bonnet.
For access to it:
F
open the bonnet using the interior release lever
, then the exterior
safety catch,
F

remove the plastic cover for access to the two terminals,
F


unclip the fusebox to remove the battery
, if necessary.
ACCESS TO THE BATTERYBefore doing any work
Immobilise the vehicle: apply the parking brake, put the gearbox
into neutral (or position P if your vehicle has an automatic
gearbox), then switch off the ignition.
Check that all electrical systems are off.
Do not reverse the polarity and use only a 12 V charger.
Do not disconnect the terminals while the engine is running.
Do not charge the batteries without disconnecting the terminals
first.
Ensure that the battery posts and terminals are clean. If covered
in sulphate (white or green deposits), remove and clean them.
The batteries contain harmful substances such as sulphuric
acid and lead. They must be disposed of in accordance with
regulations and must not, in any circumstances, be discarded with
household waste.
Take used remote control batteries and vehicle batteries to a
special collection point.
8/
PRACTICAL INFORMATION

184
RCZ_en_Chap08_info-pratiques_ed01-2015
TOWING A VEHICLE
TOWING EYE
This is stored in the boot under the floor.
For access to it:
F

open the boot,
F

raise the floor using the strap,
F

secure it in the vertical position beyond the stops, located on the
sides of the boot,
F


remove the towing eye from the storage box.
GENERAL RECOMMEN d ATIONS
Observe the legislation in force in your country.
Ensure that the weight of the towing vehicle is higher than that of
the towed vehicle.
The driver must remain at the wheel of the towed vehicle and
must have a valid driving licence.
When towing a vehicle with all four wheels on the ground, always
use an approved towing arm; rope and straps are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine off, there is no longer any
power assistance for braking or steering.
In the following cases, you must always call on a professional
recovery service:
-

vehicle broken down on a motorway or fast road,
-


four-wheel drive vehicle,
-


when it is not possible to put the gearbox into neutral, unlock
the steering, or release the parking brake,
-


towing with only two wheels on the ground,
-


where there is no approved towing arm available...