2015 Peugeot RCZ lock

32
RCZ_en_Chap01_controle-de-marche_ed01-2015
* Depending on version.
** Depending on country of sale.
"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:
- define the vehicle parameters,
- display
configuration,
-

choice of language.
define the vehicle parameters*
Once this menu has been selected, you can activate or deactivate the
following equipment:
-

selective unlocking (refer to the "Access" section),
-


guide-me-home lighting (refer to the "V
isibility" section),
-
interior mood lighting (refer to the "Ease of use and comfort" section)\
,
-


daytime running lamps** (refer to the "V
isibility" section),
-

rear parking sensors (refer to the "Driving" section). Example: setting of the duration of the guide-me-home lighting
F


Press the "
5" or "6" buttons, then the "OK" button to select the
menu required.
F
Press the "
5" or "6" buttons, then the "OK" button to select the
"Guide-me-home headlamps" line.
F
Press the "
7" or "8" buttons to set the value required (15, 30 or

60 seconds), then press the "OK"
button to confirm.
F Press the " 5" or "6" buttons, then the "OK" button to select the
"OK"
box and confirm or press the
"Back" button to cancel.

35
RCZ_en_Chap01_controle-de-marche_ed01-2015
"SETUP" MENU
F Press the "SETUP" button to gain access to the configuration menu:
- "Display configuration",
-

"V
oice synthesis",
-

"Choice of language",
-


"V
ehicle parameters",
-

"Alert log".
As

a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary

.
display configuration
This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and\

temperature (°Centigrade or °Fahrenheit).
Voice synthesis
This men allows you to adjust the volume for navigation instructions and\

to choose the type of voice (male or female).
* Depending on version.
** According to country of sale.
Choice of language
This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).
Vehicle parameters*
This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:
-

Access to the vehicle
●

Plip action (selective unlocking of the driver's door; refer to the
"Access" section),
-


Parking sensors
-

Lighting configuration (see the "Visibility" section) :
● Duration
of the guide-me-home lighting,
● Directional
headlamps (main/additional directional lighting),
● Mood
lighting (Interior mood lighting),
● Daytime
running lamps**.
Alert log
It lists the active alerts by displaying their associated messages in tu\
rn.
Setting the date and time
F
Press "
SETUP".
F Select

"Display

configuration"

and

confirm.
F Select

"Set

date

and

time"

and

confirm.
You can select "Synchronise the minutes with GPS ", so that the
minutes are adjusted automatically by satellite reception. F Select
the setting to modify. Confirm by pressing "
OK", then adjust
the setting and modify again.
F
Adjust the settings one by one.
F

Select "
OK" in the screen then confirm to save the setting.
1/
MONITORING

37
RCZ_en_Chap02_ouvertures_ed01-2015
REMOTE CONTROL KEY
System which permits central unlocking or locking of the vehicle using
the lock or from a distance. It is also used to locate and start the
vehicle, as well as providing protection against theft.
UNLOCKING THE VEHICLE
Unfolding the key
F First press this button to unfold the key .
Complete unlocking using the remote control
F Press the open padlock to unlock the vehicle.
Selective unlocking using the remote control
F Press the open padlock once to unlock the driver's door
and
the fuel filler flap only.
F

Press the open padlock again to unlock the passenger's door and
the boot.
Selective unlocking using the key
F Turn the key forwards in the driver's door lock once to unlock the driver's door and the fuel filler flap only.
F

T
urn the key forwards in the driver's door lock again to unlock the
passenger's door and the boot.
The complete or selective unlocking parameter is set via
the
vehicle configuration menu.
Complete unlocking is activated by default.
Complete unlocking using the key
F Turn the key forwards in the driver's door lock to unlock the vehicle.
Unlocking and partial opening of the boot
F Press this button for more than two seconds to unlock
the boot. The boot opens slightly.
This
action also unlocks the doors and the fuel filler flap.
The

direction indicators flash for a few seconds.
Depending on version, the door mirrors unfold, the alarm is deactivated.\
2/
ACCESS

38
RCZ_en_Chap02_ouvertures_ed01-2015
If one of the doors or the boot is still open, the central locking does \
not take place; the vehicle locks and then immediately unlocks,
witnessed by the sound of the locks rebounding. However, the
alarm (if fitted) will be fully activated after about 45 seconds.
When the vehicle is locked, if it is unlocked inadvertently, it will
lock itself again automatically after thirty seconds unless a door is
opened.
If the alarm had been activated previously, it will not be reactivated
automatically.
The folding and unfolding of the door mirrors using the remote
control
can be deactivated by a PEUGEOT

dealer or a qualified
workshop.
LOCKING THE VEHICLE
Normal locking using the remote control
F Press the closed padlock to lock the vehicle completely .
Normal locking using the key
F Turn the key rearwards in the driver's door lock to lock the vehicle
completely.
deadlocking using the remote control
F Press the closed padlock to lock the vehicle completely.
F Press the closed padlock again within five seconds to
deadlock the vehicle.
deadlocking using the key
Deadlocking renders the exterior and interior door controls
inoperative.
It also deactivates the manual central control button.
Therefore, never leave anyone inside the vehicle when it is
deadlocked.
The direction indicators come on for a few seconds.
Depending on version, the door mirrors fold, the alarm is activated.
F

T
urn the key rearwards in the driver's door lock to lock the vehicle
completely.
F Turn the key rearwards again within five seconds to deadlock the
vehicle.
The direction indicators come on for a few seconds.
Depending on version, the door mirrors fold, the alarm is activated.

39
RCZ_en_Chap02_ouvertures_ed01-2015
Folding the key
F First press this button to fold the key.
LOCATING YOUR VEHICLE
R

EMOTE
CONTROL
PROBLEM
Following disconnection of the vehicle battery, replacement of the
remote control battery or in the event of a remote control malfunction, \
you can no longer unlock, lock or locate your vehicle.
F
First of all, use the key in the lock to unlock or lock your vehicle.
F


Then, reinitialise the remote control.
If the problem persists, contact a PEUGEOT

dealer as soon as
possible.
Reinitialisation
F Switch of f the ignition.
F
T
urn the key to position 2 (Ignition on) .
F

Press the closed padlock immediately for a few seconds.
F


Switch of
f the ignition and remove the key from the ignition switch.
The remote control is fully operational again.
Changing the battery
Battery ref.: CR1620 / 3 volts.
If the battery is flat, you are informed by illumination of this
warning lamp, accompanied by an audible signal and an alert
message in the screen.
F


Unclip the casing using a coin at the notch.
F

Slide the flat battery out of its location.
F

Slide the new battery into its location observing the original
direction.
F


Clip the casing.
F


Reinitialise the remote control.
This function allows you to identify your vehicle from a
distance, particularly in poor light.

Your vehicle must be
locked.
F
Press the closed padlock on the remote control.
This will switch on the courtesy lamps and the direction indicators will\

flash

for

around

ten

seconds.
If you do not press the button when folding the key, there is a risk
of damage to the mechanism.
2/
ACCESS

40
RCZ_en_Chap02_ouvertures_ed01-2015
LOST KEYS
Go to a PEUGEOT dealer with the vehicle's registration document, your personal identification documents and if possible the key code label.
The PEUGEOT

dealer will be able to look up the key code and the transponder code required to order a new key.
LOCKING THE VEHICLE
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
As a safety precaution, never leave children alone in the vehicle, excep\
t for a very short period.
In all cases, it is essential to remove the key from the ignition switch\
when leaving the vehicle.
REMOTE CONTROL
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range \
and out of sight of your vehicle.
You run the risk of stopping it from
working and the remote control would have to be reinitialised.
No remote control can operate when the key is in the ignition switch, ev\
en when the ignition is switched off, except for reinitialisation.
ANTI-THEFT PROTECTION
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
Do not throw the remote control batteries away , they contain metals which are harmful to the environment.
Take them to an approved collection point.
WHEN PURCHASING A SECON d- HAN d VEHICLE
Have the pairing of all of the keys in your possession checked by a PEUG\
EOT dealer, to ensure that only your keys can be used to open and
start the vehicle.

41
RCZ_en_Chap02_ouvertures_ed01-2015
ALARM*
System which protects and provides a deterrent against theft and break-
ins. It provides the following types of monitoring:
- exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a door, the boot, the
bonnet...
- interior volumetric
The system checks for any variation in the volume in the passenger compa\
rtment.
The alarm is triggered if anyone breaks a window, enters the passenger
compartment or moves inside the vehicle.
- tilt
The system checks for any change in the attitude of the vehicle.
The alarm is triggered if the vehicle is lifted, moved or knocked.For all work on the alarm system, contact a PEUGEOT dealer or a
qualified
workshop.
LOCKING THE VEHICLE WITH FULL ALARM
SYSTEM
Activation
F Switch off the ignition and get out of the vehicle.
F
Press the locking button on the remote control.
The

monitoring system is active: the indicator lamp in the button flashes
once per second.
After the locking button on the remote control is pressed, the exterior \
perimeter monitoring is activated after a delay of 5 seconds and the
interior volumetric and anti-tilt monitoring after a delay of 45 seconds\
.
deactivation
F Press the unlocking button on the remote control.
The alarm system is deactivated: the indicator lamp in the button goes o\
f f.
Self-protection function
The system checks for the putting out of service of its
components.
The alarm is triggered if the battery, the central control or the siren
wiring are put out of service or damaged.
* According to country. If an opening (door, boot...) is not closed fully, the vehicle is not
locked but the exterior perimeter monitoring will be activated after
a delay of 45 seconds at the same time as the interior volumetric
and anti-tilt monitoring.
2/
ACCESS

42
RCZ_en_Chap02_ouvertures_ed01-2015
LOCKING THE VEHICLE WITH EXTERIOR
PERIMETER

MONITORING
ONL
Ydeactivation of the interior volumetric and anti-tilt monitoring
F Switch off the ignition.
F
Within ten seconds, press the button until the indicator lamp is on
continuously

.
F

Get out of the vehicle.
F


Press the locking button on the remote control immediately
.
The exterior perimeter monitoring alone is activated: the indicator lamp\

in
the button flashes once per second.
Reactivation of the interior volumetric and anti-tilt monitoring
F Press the unlocking button on the remote control to deactivate the
exterior perimeter monitoring.
F

Press the locking button on the remote control to activate all the
monitoring functions.
The

indicator lamp in the button again flashes once per second.
Deactivate the interior volumetric and anti-tilt monitoring to avoid
unwanted triggering of the alarm in certain cases such as:
-

leaving a pet in the vehicle,
-

leaving a window partially open,
-
washing your vehicle,
-

changing a wheel,
-


having your vehicle towed,
-


transport by sea. T

o be effective, this deactivation must be carried out each time the
ignition is switched off.