2015 Peugeot RCZ automatic transmission

185
RCZ_en_Chap08_info-pratiques_ed01-2015
TOWING YOUR VEHICLE
Towing from the front
F On the front bumper , unclip the cover by pressing on the left.
F
Screw the towing eye in fully
.
F

Install the towing arm.
F


Place the gear lever in neutral (position N

for an automatic
gearbox).
Failure to follow this advice could result in damage to certain
components (braking, transmission...) and the absence of
braking assistance the next time the engine is started.
F


Unlock the steering by turning the ignition key one notch and
release the parking brake.
F


Switch on the hazard warning lamps on both vehicles.
F


Move of
f gently and drive slowly and for a short distance only.
Towing from the rear
It is also possible to pull your vehicle from the rear, but only in
exceptional circumstances (vehicle in a parking space, off the road...).
F
On the rear bumper
, unclip the cover by pressing on the left.
F

Screw the towing eye in fully
.
F

Install the towing bar
.
F

Place the gear lever in neutral (position N

for an automatic
gearbox).
F

Switch on the hazard warning lamps on both vehicles.
F


Move of
f very gently to pull the vehicle out.
* Except version with symmetrical twin exhaust tailpipes.
TOWING ANOTHER VEHICLE *
F On the rear bumper, unclip the cover by pressing on the left.
F
Screw the towing eye in fully
.
F

Install the towing bar
.
F

Switch on the hazard warning lamps on both vehicles.
F


Move of
f gently and drive slowly and for a short distance only.
8/
PRACTICAL INFORMATION

05
224
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black and blue triangle: general information, for example:
W
eather reports
Modified signage
Risk of explosion Traffic
reports
Narrow carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
Delay
No entry Snow / ice
Roadworks
Traffic
jam
Receiving TA messages
The TA (Traffic Announcement) function gives priority to T A alert messages.
To operate, this function needs good reception of a
radio
station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD, USB, ...) is
interrupted automatically to play the

TA message. Normal playback
of the audio source resumes at the end of the transmission of
the
message. Press RA
d IO to display the menu.
Select "Service announcements" then
confirm.
Activate or deactivate "TA "
then confirm.
The volume setting for TA messages can be adjusted only during the
transmission of this type of alert. Activate or deactivate the function at any time by pressing
the button.
During a message, press the button to interrupt it.
TRAFFIC INFORMATION

04
264
RCZ_en_Chap10c_RD45_ed01_2015
AUdIO
Receiving TA messages
Press the TA button to activate or
deactivate traffic messages.
The

T

A


(Traffic
Announcement)
function gives priority to
T
A

alert
messages.

To operate, this function needs good reception of a
radio

station
transmitting this type of message. When a traffic
report is transmitted, the current audio source (Radio, CD, ...) is
interrupted automatically to play the

TA message. Normal playback
of the audio source resumes at the end of the transmission of the
message.
Change band (FM1, FM2, DAB, ...).
dAB (digital Audio Broadcasting)
d
igital radio
Digital radio provides a superior audio quality and also additional categories of traffic announcements (TA INFO).
The different "multiplex services" offer a choice of radio stations in
alphabetical order.
Change of station within the same "multiplex service".
Start a search for the next "multiplex service".
Long press: select the desired categories of
announcements from Transport, News, Entertainment
and Flash special (availability according to the station).
When the radio station is displayed in the screen, press on " OK" to
display the contextual menu.
(Frequency
hopping (RDS), DAB / FM auto tracking, RadioText
(T

x T) display, Information on the station, ...)

06
272
RCZ_en_Chap10c_RD45_ed01_2015
Initiate the pairing between the telephone and
the vehicle. This pairing can be initiated from
the vehicle's telephone function menu or via the
telephone's keypad. Refer to the steps in "Pairing
a telephone" on the previous pages. During the
pairing phase, the vehicle must be stationary with
the key in the ignition.Select the telephone to be connected from the telephone function
menu.
The audio system connects to a newly paired telephone automatically.
Bluetooth audio streaming*
Wireless transmission of music files on the telephone, played via the audio equipment. The telephone must be able to manage the
appropriate

Bluetooth profiles (Profiles
A2DP
/
A
VRCP).
* Depending on the compatibility of the telephone.
**

In


certain cases, playing of the
Audio
files must be initiated from
the

keypad.
*** If the telephone supports the function. Activate the streaming source by
pressing the SOURCE button**.
The tracks to be played can be
controlled as usual via the buttons on
the audio system control panel and
the steering mounted controls***.
The contextual information can be
displayed on the screen.
During a call, press this button for more than
2 seconds.
Confirm

with

OK

to

end

the

call.
Ending a call
BLUETOOTH