2015 Peugeot RCZ lock

2
RCZ_en_Chap00a_sommaire_ed01-2015
Direction indicators 87
Hazard warning lamps 87
Emergency or assistance call

88
Horn


88 Braking assistance systems

89
T rajectory control systems 90
Active bonnet

92
Active spoiler


93Front seat belts

96
Airbags 99
Child seats

104
Deactivating the passenger's front airbag


106
Front seats


50
Steering wheel adjustment

54
Mirrors
55
Rear seats
58
V
entilation 59
Dual-zone digital air conditioning
61
Rear screen demist -


defrost
63
Courtesy lamp

64
Interior mood lighting

65
Interior fittings

67
Front armrest

70
Boot fittings

73
Lighting controls

75
LED lamps

78
Automatic illumination of headlamps

79
Headlamp adjustment

81
Directional lighting

82
Wiper controls

83
Automatic rain sensitive wipers

85
4-9OVERVIEW
1/ 12-36MONITORING
2/ 37-49ACCESS
3/ 50-74EASE OF USE AN
d COMFORT
4/ 75-86VISIBILITY
5/ 87-1 14SAFETY
Remote control key 37
Alarm 41Electric windows
44
Doors 46Boot
49
Instrument panels
12
W
arning and indicator lamps
14
Indicators

21
Instrument panel buttons

25
Clock

26
T
rip computer
27
Monochrome screen C (PEUGEOT Connect Sound (RD5))
30
Retractable colour screen (P
EUGEOT

Connect Navigation (RT6))

3
4
10-11ECO-dRIVING
CONTENTS

4
RCZ_en_Chap00b_vue-ensemble_ed01-2015
ExTERIOR
Remote control key 37-40
- opening / closing
-

unlocking / partial opening of the boot
-


anti-theft protection
-

battery
Alarm
41-43
Boot
49
Temporary puncture repair kit

150-156
Changing a wheel


157-161
Active,

fixed spoiler 93-94,
95
Parking sensors

135-137
T

owbar 186-187
Towing

184-185
Changing bulbs


172-176
-


rear lamps
-


3rd stop lamp
-


number plate lamps Accessories

190-191
Cleaning, maintenance

188-189
Fuel tank


139-140Wipers

83-86
Changing a wiper blade

163
Door mirrors


55-56
Active bonnet


92
Lighting controls


75-80
Directional lighting


82
Headlamp height adjustment


81
Changing bulbs


169-172
-


front lamps
-


direction indicator repeaters
Doors

46-48
-

opening / closing
-


central locking
-


anti-intrusion security
-


emergency locking
Electric windows


44-45
Braking assistance


89
T

rajectory control
90-91
T

yre under-inflation detection 127-128
Tyre pressures

156, 198
Snow chains


162

6
RCZ_en_Chap00b_vue-ensemble_ed01-2015
Instrument panels 12-13
W arning lamps 14-20
Indicators
21-24
Buttons
25-26
-

Check / service indicator / trip distance
recorder
-


lighting dimmer
Headlamp height adjustment


81
Door mirrors


55-56
Electric windows


44-45
Dashboard fuses


177-180
Opening the bonnet


141Courtesy lamps

64
Seat belt / passenger's front airbag warning lamps display
96-97
Rear view mirror

57
Sun visor


68
Parking brake


1
19
Active spoiler control

93-94Ignition switch / Steering lock / Starting


1
16-118
Multifunction screens

30-36
Clock


26
P

EUGEOT
Connect Navigation (R
T6)
2
03-258
P
EUGEOT
Connect Sound (RD5)

259-278
V

entilation 59-60
Dual zone digital air conditioning

61-63
Automatic gearbox


122-125
Manual gearbox


121
Gear shift indicator


126
Hill start assist


120
INSTRUMENTS AND CONTROLS

8
RCZ_en_Chap00b_vue-ensemble_ed01-2015
DSC/ASR system 90-91
Parking sensors 135-137
Assistance call

88, 201-202
Hazard warning lamps


87
Emergency call


88, 201-202
V

olumetric alarm monitoring

41-43
Central locking /

Anti-intrusion
security

47-48
INSTRUMENTS AND CONTROLS
CENTRAL
SWITCH P ANEL

17
RCZ_en_Chap01_controle-de-marche_ed01-2015
Anti-lock
Braking
System (ABS)fixed.
The anti-lock braking system has
a fault. The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a PEUGEOT
dealer
or a qualified workshop without delay.
d

ynamic
stability control
(
d SC/ASR) flashing.
The DSC/ASR regulation is
operating. The system optimises traction and improves the directional
stability of the vehicle in the event of loss of grip or trajectory.
fixed. The DSC/ASR system has a
fault. Have
it checked by a PEUGEOT

dealer or a qualified
workshop.
d

irectional
headlamps flashing.The directional headlamps
system has a fault. Have
it checked by a PEUGEOT

dealer or a qualified
workshop.
W

arning/indicator
lamp is on CauseAction / Observations
Seat belt not
fastened /
unfastened fixed,
then
flashing

in the
passenger's seat
belt and front
airbag warning
lamp display

.The driver or front passenger has
not fastened or has unfastened
their seat belt.
Pull
on the belt in question and insert the tongue in the
buckle.
For more information, refer to the "Seat belts" section.
At least one rear passenger has
unfastened their seat belt.
Under-inflation fixed.
The pressure in one or more
wheels is too low

.Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the tyres
are cold.
+ flashing
then fixed,
accompanied


by the Service
warning lamp. The tyre pressure monitoring
system has a fault or no sensor is
detected on one of the wheels.
Under-inflation
detection is not assured.
Have the system checked by a PEUGEOT dealer or a
qualified
workshop.
1/
MONITORING

24
RCZ_en_Chap01_controle-de-marche_ed01-2015
Service overdue
For a few seconds after the ignition is switched on, the spanner
flashes to indicate that the service must be carried out as soon as
possible.
Example: the service is overdue by 300 miles (300
km).
For a few seconds after the ignition is switched on, the central screen \
indicates:
The spanner remains on in the small screen
to indicate that a service should have been
carried out.
The distance remaining may be weighted by the time factor,
depending on the type of motoring the vehicle is used for.
Therefore, the spanner may also come on if you have exceeded
the
period since the last service specified in the manufacturer's
service schedule.
This indication applies only to HDi Diesel engines.
Service indicator reset
Retrieving the service information
You can access the service information at any time.
This information appears when running through the manual check
procedure.
F Briefly press the "CHECK/000" button.
The service information is displayed for a few seconds on the
instrument panel central screen, then disappears.
Following this operation, if you wish to disconnect the battery

,
lock the vehicle and wait at least five minutes for the reset to be
registered.
After each service, the service indicator must be reset.
If you have carried out the service on your vehicle yourself:
F

switch of
f the ignition,
F
press and hold the
"CHECK/000" button,
F

switch on the ignition; the distance recorder display begins a
countdown,
F

when the instrument panel central screen indicates
"=0"
, release
the button; the spanner disappears from the small screen.

25
RCZ_en_Chap01_controle-de-marche_ed01-2015
MANUAL CHECK
This function allows you to check the status of the vehicle (reminder o\
f
the active alert warnings) and the service information.
F With
the engine running, to start a manual check, briefly press the
"CHECK/000" button on the instrument panel.
If no faults have been detected,

"CHECK OK" appears in the
instrument panel central screen.
If a "minor" fault has been detected, the warning lamp concerned then
"CHECK OK" appear in the instrument panel central screen. Contact a
PEUGEOT


or a qualified workshop.
If a "major" fault has been detected, only the warning lamps concerned
appear in the instrument panel central screen. Have it checked by a
PEUGEOT


dealer or a qualified workshop.
dISTANCE RECORdERS
The total and trip distances are displayed for thirty seconds when the
ignition is switched off, when the driver's door is opened and when the
vehicle is locked or unlocked.
Measures the total distance travelled by the vehicle since its first
registration.
Total distance recorder
F With the ignition on, press and hold this button until zeros appear .
Trip distance recorder
Measures the distance travelled since it was last reset to zero by the
driver.
1/
MONITORING

26
RCZ_en_Chap01_controle-de-marche_ed01-2015
LIGHTING dIMMER
Permits manual adjustment of the brightness of the instruments and
controls to suit the ambient light level. Only operates when the vehicle\

lighting is on, with the exception of the daytime running lamps.
Activation
F Press the button to change the brightness of the instruments and
controls.
F

When the lighting reaches the minimum setting, release the button,
then press again to increase it.
or
F


When the lighting reaches the maximum setting, release the button,
then press again to reduce it.
F

When the lighting reaches the level of brightness required, release
the button.
deactivation
When the vehicle lighting is off, or in day mode on vehicles fitted with daytime running lamps, pressing the button does not have any effect.
CLOCK
The analogue clock, located between the central vents of the
dashboard, does not have an adjustment button.
To set the time, refer to the section relating to your multifunction
screen's
configuration menu.
The clock is synchronised with the multifunction screen time; once the
the
setting has been confirmed on the multifunction screen, the hands
will turn to synchronise with the screen, and each time the ignition is \
switched on.