2015 NISSAN VERSA NOTE Owners Manual

Page 105 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or
have an inability to feel pain in body parts
that contact the seat. Us

Page 106 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual The power outlet is for powering electrical acces-
sories such as cellular telephones. The outlet is
rated at 12 volt, 120 W (10A) maximum.
CAUTION
●The outlet and plug may be hot during
or immediat

Page 107 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual SEATBACK POCKETS
The seatback pockets are located on the back of
the driver and front passenger seat. The pockets
can be used to store maps.
STORAGE TRAYS
WARNING
Do not place sharp objects in the tra

Page 108 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual Lower the rear center armrest to access the cup
holders.CAUTION
●Do not use bottle holder for any other
objects that could be thrown about in
the vehicle and possibly injure people
during sudden bra

Page 109 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual GLOVE BOXUpper glove box
Open the upper glove box by pulling the handle.
WARNING
Keep glove box lid closed while driving to
help prevent injury in an accident or a
sudden stop.
Lower glove box
Open th

Page 110 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual CARGO COVER (if so equipped)
WARNING
●Never put anything on the cargo cover,
no matter how small. Any object on it
could cause an injury in an accident or
sudden stop.
● Do not put objects heavier

Page 111 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual To remove the cargo cover:
1Remove the straps from the rear hatch.
2Remove the edge of the cargo cover privacy
cloth from the rear seatback.
3Remove the cargo cover holders from the
rear pillar.
DI

Page 112 of 384

NISSAN VERSA NOTE 2015 2.G Owners Manual To raise:1. Lift and open the panel
2. Move the load floor along the lower trim panel channels toward the rear of the vehicle
until it reaches the end of the slot.
3. Move the load floor along the upp