2015 NISSAN JUKE lock


> (GLW   0RGHO )'@
CHECKING BULBS
GUID-C22 DF306-092D -4583-8CB3-A6AC7219AD 77
With alldoors closed, applytheparking brake
and place theignition switchinthe ON position
without starting theengine. Thefollowing lights
will come on(ifso
equipped):
,
or
,
,
,
,
,
The following lightscome onbriefly andthen go
off (ifso equipped):
,
or
,
,
,
,
,
,
,
If any light does notcome on,itmay indicate a
burned-out bulboran open circuit inthe
electrical system.Havethesystem checked by
a NISSAN dealer.
W ARNING LIGHTS
GUID-6B 8C70F3-46 8B-4200-B5D0-854A7 1617076
All-Wheel Drive(AWD) warning
light (AWD model)
GUID-045 1414D-383 B-4466-A18 3-5E0504D41E4D
When theignition switchisin the ªONº position,
the All-Wheel Drive(AWD) warning lightwill
illuminate. Itwill turn offsoon aftertheengine is
started.
If the AWD system malfunctions orthe revolu-
tion orradius ofthe front andtherear wheel
differs, theAWD warning lightwilleither remain
illuminated orblink. (SeeªAll-Wheel Drive
(A WD)º (P.5-29) .)
or
Anti-lock BrakingSystem
(ABS) warning light
GUID-94 D8EF69-CB 1A-45F8-A40 A-491B3BA0299B
When theignition switchisin the ON position,
the Anti-lock BrakingSystem(ABS)warning
light illuminates andthen turns off.This indicates
the ABS isoperational.
If the ABS warning lightilluminates whilethe
engine isrunning, orwhile driving, itmay
indicate theABS isnot functioning properly.
Have thesystem checked byaNISSAN dealer.
If an ABS malfunction occurs,theanti-lock
function isturned off.The brake system then
operates normally,but without anti-lock assis-
tance. (SeeªBrake systemº (P.5-35) .)
or
Brake warning light
GUID-21F07 80E-8D92-4B48-8AC5-495231853B E1
This light functions forboth theparking brake
and thefoot brake systems.
Parking brakeindicator:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
When theignition switchisin the ON position,
the light illuminates whentheparking brakeis
applied.
Low brake fluidwarning light:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
When theignition switchisin the ON position,
the light warns ofalow brake fluidlevel. Ifthe
light illuminates whiletheengine isrunning with
the parking brakenotapplied, stopthevehicle and
perform thefollowing:
1. Check thebrake fluidlevel. Ifbrake fluidis
necessary ,add fluid andhave thesystem
checked byaNISSAN dealer.(SeeªBrake
and clutch fluidº(P.8-12) .)
2. Ifthe brake fluidlevel iscorrect, havethe
warning systemchecked byaNISSAN
dealer.
Anti-lock BrakingSystem(ABS)warning
indicator:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
When theparking brakeisreleased andthe
brake fluidlevel issufficient, ifboth thebrake
warning lightandtheAnti-lock BrakingSystem
(ABS) warning lightilluminate, itmay indicate
the ABS isnot functioning properly.Have the
brake system checked, andifnecessary re-
paired, byaNISSAN dealerpromptly .(See
ª Anti-lock BrakingSystem(ABS)warning lightº
(P .2-13) .)
WARNING
. Your brake system maynotbe
working properly ifthe warning light
is on. Driving couldbedangerous. If
you judge itto be safe, drive care-
fully tothe nearest servicestation
for repairs. Otherwise, haveyour
Instrume ntsand controls
2-13
&RQGLWLRQ


> (GLW   0RGHO )'@
Operation:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
The malfunction indicatorlightwillcome onin
one oftwo ways:
. Malfunction indicatorlightilluminated steady
Ð An emission controlsystem and/orCVT
malfunction hasbeen detected. Checkthe
fuel-filler capifthe LOOSE FUELCAP
warning message isdisplayed onthe twin
trip odometer. Ifthe fuel-filler capisloose or
missing, tightenorinstall thecap and
continue todrive thevehicle. The
light
should turnoffafter afew driving trips.Ifthe
light does notturn offafter afew driving
trips, havethevehicle inspected bya
NISSAN dealer.You do not need tohave
your vehicle towedtothe dealer.
. Malfunction indicatorlightblinking ÐAn
engine misfirehasbeen detected whichmay
damage theemission controlsystem.
T o reduce oravoid emission controlsystem
damage:
1) Do not drive atspeeds above45MPH
(72 km/h) .
2) Avoid hardacceleration ordeceleration.
3) Avoid steepuphillgrades.
4) Ifpossible, reducetheamount ofcargo
being hauled ortowed.
The malfunction indicatorlightmaystop
blinking andremain on. Have
thevehicle inspected byaNISSAN
dealer. You do not need tohave yourvehicle
towed tothe dealer.
CAUTION
Continued vehicleoperation without
having theemission controlsystem
and/or CVTsystem checked andre-
paired asnecessary couldleadtopoor
driveability, reducedfueleconomy, and
possible damagetothe emission con-
trol system.
Security indicator light
GUID-5B BF01E2-313 5-4B2A-BA68-00E15944E42A
The light blinks whentheignition switchisin the
ACC, OFForLOCK position. Thisfunction
indicates thesecurity systemequipped onthe
vehicle isoperational.
If the security systemismalfunctioning, thislight
will remain onwhile theignition switchisin the
ON position. Foradditional information, see
ªSecurity systemsº(P.2-29) .
T urn signal/hazard indicatorlights
GUID-93 8BCB58-C7D 0-4656-B2E2-A3F2D5 C472C5
The light flashes whentheturn signal switch
lever orhazard switchisturned on.
V ehicle Dynamic Control(VDC)off
indicator light
GUID-BB D2CFDF-748 6-4847-A2BC-6E1274 44B584
When theignition switchisin the ªONº position,
the Vehicle Dynamic Control(VDC)offindicator
light illuminates andthen turns off.
The light comes onwhen theVehicle Dynamic
Control (VDC)offswitch ispushed toOFF .This
indicates thattheVDC system andtraction
control system arenot operating.
AUDIBLE REMINDERS
GUID-429 04A1A-6A75 -4B8C-8F34-6D9818D 98A82
K ey reminder chime
GUID-32 BD73EC-E7A4 -4435-A048-B7769B71 7D08
A chime willsound ifthe driver sidedoor is
opened whiletheignition switchispushed to
the ACC position.
Make suretheignition switchispushed tothe
OFF position, andtake theIntelligent Key with
you when leaving thevehicle.
Instrume ntsand controls
2-19
&RQGLWLRQ


> (GLW   0RGHO )'@
2-20
Instrument sand controls
Light reminder chime
GUID-721 68721-DFA8-448A-9 61A-A3FACAB0A 8E3
The light reminder chimewillsound whenthe
driver sidedoor isopened withtheheadlight
switch inthe
or
position, andthe
ignition switchisin the ACC, OFForLOCK
position.
T urn thelight switch offwhen youleave the
vehicle.
Brake padwear warning
GUID-EF 2EB7E0-B2 27-4E63-9D C8-B730CC1 3FB1B
The disc brake padshaveaudible wearwarn-
ings. When abrake padrequires replacement, it
will make ahigh pitched scraping soundwhen
the vehicle isin motion. Thisscraping soundwill
first occur onlywhen thebrake pedalis
depressed. Aftermore wearofthe brake pad,
the sound willalways beheard evenifthe brake
pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe warning
sound isheard.
Parking brakereminder chime
GUID-885 3279F-1AD 6-47C7-B9A8 -09A67EC2B7BE
The parking brakereminder chimewillsound if
the vehicle isdriven atmore than4MPH (7
km/h) withtheparking brakeapplied. Stopthe
vehicle andrelease theparking brake.
Seat beltwarning chime
GUID-F9 E8997E-7A8 8-4D30-B477- C791A79F8575
The seat beltwarning chimewillsound forabout
6 seconds unlessthedriver's seatbeltis
securely fastened.
&RQGLWLRQ


> (GLW   0RGHO )'@
2-22
Instrument sand controls
SETUP FUNCTION
GUID-5B5DB B47-0C64-4C41-8AF1-4 43319848F1A
While inthe Drive mode, thefollowing itemscan
be set upbypressing theSETUP button.
. Display Brightness
. Button Brightness
. Clock TimeSetting
. Select Language
. Select Units
. Auto Interior Illumination
. Selective Doorunlock
. Auto Headlight Sensitivity (ifso equipped)
. CLIMA TEECO
NO TE:
. The SETUP function cannotbead-
justed whiledriving.
. When thebattery isdisconnected, the
SETUP memory iserased andreverts to
the default settings. Ifnecessary, reset
the SETUP memory afterreconnecting
the
battery.
SIC4617
Setting Display Brightness andButton
Brightness
GUID-27E 9F256-C04 B-4006-9271-055B95871748
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªDisplay Bright-
nessº orªButton Brightnessº thenpress the
ENTER
button.
SIC4557
4. Turn theSelection dialto+to increase
brightness orto


> (GLW   0RGHO )'@
Clock TimeSetting
GUID-281 2E6D3-793 3-4DFF-89C0 -F87C59706668
NO TE:
Clock TimeSetting isused fordisplaying
the ECO information. SeeªEco informa-
tionº (P.2-27)
.
SIC4558
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªClock Time
Settingº ,then press theENTER
button.
SIC4559
4. Turn theSelection dialtoselect theday of
the week, thenpress theENTER buttonto
apply theselection.
5. Turn theSelection dialtoselect thehour and
AM orPM, then press theENTER buttonto
apply theselection.
6. Turn theSelection dialtoselect theminutes,
then press theENTER buttontoapply the
selection.
Instrume ntsand controls
2-23
&RQGLWLRQ


> (GLW   0RGHO )'@
SIC4581
4. Turn theSelection dialtoselect ªUSºor
ªMETRICº ,then press theENTER buttonto
apply the
selection.
SIC4605
Auto Interior Illumination
GUID-73 C0C534-32F 7-4478-94B8-BD493A 21A348
Select toturn theillumination ofthe interior
lights onoroff when anydoor isunlocked.
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªAuto Interior
Illuminationº thenpress theENTER button.
4. Turn theSelection dialtoselect ªONºor
ªOFFº ,then press theENTER buttonto
apply the
selection.
SIC4606
Selective DoorUnlock
GUID-D7 CB0C67-3F C9-41B8-9A4 9-41124D8166DA
When thisitem isturned on,only thedriver's
door isunlocked afterthedoor unlock operation
is performed once.Allofthe doors canbe
unlocked ifthe door unlock operation isper-
formed againwithin 1minute.
When thisitem isturned off,allthe doors willbe
unlocked afterthedoor unlock operation is
performed once.
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªSelective Door
Unlockº thenpress theENTER button.
Instrume ntsand controls
2-25
&RQGLWLRQ


> (GLW   0RGHO )'@
2-26
Instrument sand controls
4. Turn theSelection dialtoselect ªONºor
ªOFFº ,then press theENTER buttonto
apply theselection. Theindicator willturn
red when selective doorunlock is
on.
SIC4607
Auto Headlight Sensitivity (ifso
equipped)
GUID-E86 05F81-0011 -489E-98B9-32D5ACC2 52FE
Select toadjust thesensitivity ofthe automatic
headlight.
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªAuto Headlight
Sensitivityº thenpress theENTER
button.
SIC4583
4. Turn theSelection dialto+to increase
sensitivity orto


> (GLW   0RGHO )'@
NO TE:
When theclock isnot set, theECO
information (dailyandweekly) cannotbe
used.
Reset atStart
GUID-F8522 59B-B08A-4BC8-BAC5-9ACC5A687 EEB
Records ofup tothe past 4times ofeach timeof
ignition switchONfuelconsumption canbe
shown onthe display .
Manual Reset
GUID-B6A6 2823-AFB2-4ADC-A65B -72B63B1719C0
Records ofup tothe past 4times ofresetting
fuel consumption canbeshown onthe display .
The displayed ECOINFO canbereset by
pushing theENTER buttonforlonger than1
second.
GUID-E521 ED90-7BA2-4 FC3-91C7-F35E3C88D AF5
JVI1163X
Y our vehicle hastwo types ofsecurity systems,
as follows:
. Vehicle security system
. NISSAN Vehicle Immobilizer System
The security condition willbeshown bythe
security indicator light.
VEHICLE SECURITY SYSTEM
GUID-B38A 9882-E3CB-4 884-A546-D9C91260 263B
The vehicle security systemprovides visualand
audio alarmsignals ifsomeone opensthedoors,
or lift gate when thesystem isarmed. Itis not,
however, amotion detection typesystem that
activates whenavehicle ismoved orwhen a
vibration occurs.
The system helpsdetervehicle theftbutcannot prevent
it,nor can itprevent thetheft ofinterior
or exterior vehiclecomponents inall situations.
Always secureyourvehicle evenifparking fora
brief period. Neverleaveyourkeys inthe vehicle,
and always lockitwhen unattended. Beaware
of your surroundings, andpark insecure, well-lit
areas whenever possible.
Many devices offeringadditional protection,
such ascomponent locks,identification markers,
and tracking systems, areavailable atauto
supply storesandspecialty shops.Your
NISSAN dealermayalso offer such equipment.
Check withyour insurance companytosee if
you may beeligible fordiscounts forvarious
theft protection features.
Instrume ntsand controls
2-29
SECURITY SY STEMS
&RQGLWLRQ