2015 NISSAN JUKE automatic transmission


> (GLW   0RGHO )'@
2-10
Instrument sand controls
OUTSIDE AIRTEMPERA TURE
GUID-1A15 7006-4054-4973-972 4-C2D210223480
The outside airtemperature isdisplayed in8F or
8C.
When theoutside airtemperature becomes
378F (38C) orlower, theoutside airtemperature
display blinkstogive awarning. Thedisplay will
stop blinking after1minute orwhen theoutside
air temperature becomes398F(48C) orabove.
The display maydiffer fromtheactual outside
temperature displayedonvarious signsorbill-
boards.
CONTINUOUS LY VARIABLE TRANS-
MISSION (CVT)POSITION INDICATOR
(if so equipped)
GUID-A EF6AFF6-79C 9-4BA4-B0D3-EC97DBF7DA83
The Continuously Variable Transmission (CVT)
position indicator indicates theshift lever posi-
tion when theignition switchisin the ON
position.
SIC4532
TRIP COMPUTER
GUID-761 D7DC4-8A 71-4FAE-9686 -B06903798D 36
The switch forthe trip computer islocated on
the meter panel.
When theignition switchisplaced inthe ON
position, modesofthe trip computer canbe
selected bypushing thetrip computer mode
switch
*
A
.
Each timethetrip computer modeswitch
*
A
is
pushed, thedisplay willchange asfollows:
(TRIP A? TRIP B)?Current fuelconsumption
? Distance toempty (dte)?Average fuel
consumption ?Elapsed time?Torque vector-
ing AWD (AWD model) (?TRIP A)
Current fuelconsumption
GUID-0A5 E70EC-4694- 4D89-8DA2-A1 60792B4EB3
The current fuelconsumption modeshows the
current fuelconsumption.
Distance toempty (dteÐmls orkm)
GUID-423 8E3D0-30E 9-4AEC-8B23-BEE5EE4 E1E0B
The distance toempty (dte)mode provides you
with anestimation ofthe distance thatcanbe
driven before refueling. Thedteisconstantly
being calculated, basedonthe amount offuel in
the fuel tank andtheactual fuelconsumption.
The display isupdated every30seconds.
The dtemode includes alow range warning
feature. Whenthefuel level islow ,the dte mode
is automatically selectedandthedte display will
blink. Pushthetrip computer modeswitch
*
A
to return tothe mode thatwas selected before
the warning occurred.
When thefuel level drops evenlower, thedte
display willchange toª----º .
. Ifthe amount offuel added issmall, the
display justbefore theignition switchis
turned offmay continue tobe displayed.
. When driving uphillorrounding curves,the
fuel inthe tank shifts, which maymomenta-
rily change thedisplay .
&RQGLWLRQ


> (GLW   0RGHO )'@
SIC3664
T ype A(if so equipped)
JVI1010X
T ype B(if so equipped)
The windshield wiperandwasher operates
when theignition switchisin the ON position.
Push thelever down tooperate thewiper atthe
following speed:
*
1
Intermittent Ðintermittent operationcanbe
adjusted byturning theknob toward
*
A
(Slower) or
*
B
(Faster) .
*
2
Low Ðcontinuous lowspeed operation
*
3
High Ðcontinuous highspeed operation
Push thelever up
*
4
to have onesweep
operation ofthe wiper.
Pull thelever toward you
*
5
to operate the
washer. Thenthewiper willalso operate several
times.
Pulling upthe wiper arm:
The windshield wipersmustbeinthe service
position inorder toreplace thewiper blades.
T o move thewiper blades tothe service position,
follow thisprocedure:
. When theignition switchisin the ªONº
position orwithin 60seconds ofplacing the
ignition switchtothe ªOFFº position, liftthe
lever up
*
4
two times inless than 0.5
seconds. Thewindshield wiperswillmove to
the service position automatically ,and the
wiper blades cannow bereplaced. To
replace thewiper blades, seeªWindshield
wiper bladesº (P.8-18) . T
o move thewiper blades backtothe original
position:
. Liftthe lever up
*
4
or push thelever down
to operate atany wiper speed.
CAUTION
. This function canbeoperated even
if the ignition switchisin the ªONº
position. However, toprevent an
accident ordamage whenpulling
up the wiper arm,besure toobserve
the following precautions.
Ð Make suretheshift lever isin
the P(Park) position (Continu-
ously Variable Transmission
models) .
Ð Make suretheshift lever isin
the N(Neutral) position,withthe
parking brakefullyapplied
(Manual Transmission models).
Ð Never allowthepassengers to
operate thewindshield wiper
switch inadvertently.
. Donot operate thewindshield wiper
while thewiper armispulled up.The
wiper armmay bedamaged.
Instrume ntsand controls
2-33
&RQGLWLRQ


> (GLW   0RGHO )'@
3-10
Pre-driving checksandadjustment s
Locking doors
GUID-07C B5A9E-DF8 3-455D-A22C -2FF8A457C4E C
1. Place theignition switchinthe OFF position
and carry theIntelligent Key with you.*1
2. Close allthe doors.*2
3. Push thedoor handle request switch(dri-
ver's orfront passenger's)
*
A
or the lift
gate request switch
*
B
while carrying the
Intelligent Key with you.*3
4. Allthe doors andtheliftgate willlock.
5. The hazard indicator flashestwiceandthe
outside chimesounds twice.
*1: Doors willlock with therequest switchwhilethe
ignition switchisin the ACC orON position.
*2: Doors willnotlock with therequest switchwhile
any door isopen.
*3: Doors willnot lock with therequest switchwhen
the Intelligent Key isleft inside thevehicle.
However, whenanIntelligent Key isinside the
vehicle, doorscanbelocked withanother
registered IntelligentKey .
Unlocking doors
GUID-FEED93 E7-A7E2-406A-BCA7-5 A65AC821C9B
1. Push thedoor handle request switch
*
A
or
the liftgate request switch
*
B
while
carrying theIntelligent Key with you.
2. The hazard indicator flashesonceandout-
side chime sounds once.Thecorresponding
door orthe liftgate willunlock. 3.
Push therequest switchagainwithin 1
minute.
4. The hazard indicator flashesonceandout-
side chime sounds onceagain. Allthe doors
and theliftgate willunlock.
All doors willbelocked automatically unlessone
of the following operations isperformed within1
minute afterpushing therequest switchwhile
the doors arelocked.
. Opening anydoor.
. Pushing theignition switch.
During this1-minute timeperiod, ifthe UNL OCK
button onthe Intelligent Key ispushed, all
doors willbelocked automatically afteranother
1 minute.
Opening liftgate
GUID-90 DFB32E-039 E-44A8-95E5- CAC6DC5E9FFF
1. Carry theIntelligent Key .
2. Push theliftgate opener switch
*
C
.
3. The liftgate willunlock.
BA TTER YSA VER SYSTEM
GUID-817 AD6BA-79 E5-43BC-A0C C-216A5D867A2A
When allthe following conditions aremet fora
period oftime, thebattery saversystem willcut
off the power supply toprevent batterydis-
charge.
. The ignition switchisin the ACC position,
and .
Alldoors areclosed, and
. The shift lever isin the P(Park) position
(Continuously Variable Transmission mod-
els) .
W ARNING LIGHTSANDAUDIBLE
REMINDERS
GUID-9651A 744-FFA0-4CDB-B228-1C2F7 BB0B640
T o help prevent thevehicle frommoving
unexpectedly byerroneous operationofthe
Intelligent Key listed onthe following chartor
to help prevent thevehicle frombeing stolen,
chime orbeep sounds insideandoutside the
vehicle andawarning lightilluminates orblinks.
When achime orbeep sounds orthe warning
light illuminates orblinks, besure tocheck the
vehicle andIntelligent Key .
See ªTroubleshooting guideº(P.3-11) and
ªW arning/indicator lightsandaudible remin-
dersº (P.2-12) .
Intelligent Key system warning
light:
P position selecting warning light:
&RQGLWLRQ


> (GLW   0RGHO )'@
passenger car.The vehicle isnot
designed forcornering atthe same
speeds asconventional passenger
cars. Failure tooperate thisvehicle
correctly couldresult inloss of
control and/orarollover accident.
. Always usetires ofthe same type,
size, brand, construction (bias,bias-
belted orradial) ,and tread pattern
on allfour wheels. Installtraction
devices onthe front wheels when
driving onslippery roadsanddrive
carefully.
. Besure tocheck thebrakes imme-
diately afterdriving inmud orwater.
See ªBrake systemº (P.5-35) forwet
brakes.
. Avoid parking yourvehicle onsteep
hills. Ifyou getout ofthe vehicle
and itrolls forward, backward or
sideways, youcould beinjured.
. Whenever youdrive off-road
through sand,mudorwater asdeep
as the wheel hub,more frequent
maintenance mayberequired. See
the maintenance informationinthe
ªNISSAN ServiceandMaintenance
Guideº . .
Spinning thefront wheels onslip-
pery surfaces maycause theAWD
warning lighttoflash andtheAWD
system toautomatically switchfrom
the AWD mode tothe 2WD mode.
This could reduce traction. Beespe-
cially careful whentowing atrailer
(AWD model) .
GUID-A A9BA26A-B 49B-43B0-A908-85126 20A8F65
WARNING
Do not operate thepush-button ignition
switch whiledriving thevehicle except
in an emergency. (Theengine willstop
when theignition switchispushed 3
consecutive timesorthe ignition switch
is pushed andheld formore than2
seconds.) Ifthe engine stopswhilethe
vehicle isbeing driven, thiscould lead
to acrash andserious injury.
Before operating thepush-button ignition
switch, besure tomove theshift lever tothe P
(Park) position (forContinuously Variable Trans-
mission models) orthe shift lever tothe N
(Neutral) position(formanual transmission
models) .
Starting anddriving
5-9
PUSH-BUT TON IGNITION SWITCH
&RQGLWLRQ


> (GLW   0RGHO )'@
5-14
Starting anddriving
GUID-00 99E665-725B -489E-B596-F5A3F4CD54DB
CONTINUOUS LY VARIABLE TRANS-
MISSION (CVT)
GUID-C69 9DF0B-987D -4AD2-879E-728294 24A200
The Continuously Variable Transmission (CVT)
in your vehicle iselectronically controlledto
produce maximum powerandsmooth operation.
The recommended operatingprocedures forthis
transmission areshown onthe following pages.
Follow theseprocedures formaximum vehicle
performance anddriving enjoyment.
Engine powermaybeautomatically re-
duced toprotect theCVT ifthe engine
speed increases quicklywhendriving on
slippery roadsorwhile being tested on
some dynamometers.
Starting thevehicle
GUID-5D2 73D53-F49E -430A-9675-C A17371F1DFA
1. After starting theengine, fullydepress the
foot brake pedalbefore moving theshift
lever outofthe P(Park) position.
This CVTisdesigned sothat thefoot
brake pedalmustbedepressed before
shifting fromP(Park) toany driving
position whiletheignition switchisin
the ONposition.
The shift lever cannot bemoved outof
the P(Park) position andinto anyof
the other positions ifthe ignition
switch isplaced inthe LOCK ,OFF or
ACC position orifthe key isremoved. 2.
Keep thefoot brake pedaldepressed, push
the shift lever button andmove theshift lever
to adriving position.
3. Release theparking brakeandfoot brake
pedal, andthen gradually startthevehicle in
motion.
WARNING
. Do not depress theaccelerator
pedal whileshifting fromP(Park)
or N(Neutral) toR(Reverse) ,D
(Drive) ,or manual shiftmode (ifso
equipped) .Always depress the
brake pedaluntilshifting iscom-
pleted. Failure todo socould cause
you tolose control andhave an
accident.
. Cold engine idlespeed ishigh, so
use caution whenshifting intoa
forward orreverse gearbefore the
engine haswarmed up.
. Never shifttoP(Park) orR(Re-
verse) whilevehicle ismoving. Fail-
ure todo socould cause youtolose
control andhave anaccident.
CAUTION
. Except inan emergency, donot shift
to the N(Neutral) positionwhile
driving. Coasting withthetransmis-
sion inthe N(Neutral) positionmay
cause serious damage tothe trans-
mission.
. When stopping thevehicle onan
uphill grade, donot hold thevehicle
by depressing theaccelerator pedal.
The foot brake should beused for
this purpose.
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
DRIVING THEVEHICLE
&RQGLWLRQ


> (GLW   0RGHO )'@
after ashort period oftime. Ifyou want to
return tothe D(Drive) position manually ,pull
and hold thepaddle shifterforabout 1.5
seconds.
M7 (7th) (except forNISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M8 (8th) (NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition forallnormal forward drivingat
highway speeds.
M6 (6th) andM5(5th) (except forNISMO
RS models) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M7 (7th) andM6(6th) (NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use these positions whendriving uplong
slopes, orfor engine braking whendriving down
long slopes.
M4 (4th) ,M3 (3rd) andM2(2nd) (except for
NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M5 (5th) ,M4 (4th) ,M3 (3rd) andM2(2nd)
(NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use these positions forhill climbing orengine
braking ondownhill grades.
M1 (1st) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition whenclimbing steephills
slowly ordriving slowlythrough deepsnow,
sand ormud, orfor maximum enginebraking on
steep downhill grades. .
Remember nottodrive athigh speeds for
extended periodsoftime inlower thanM7
(except forNISMO RSmodels) orM8
(NISMO RSmodels) range.Thisreduces
fuel economy .
. Inthe manual shiftmode, thetransmis-
sion maynotshift tothe selected
range. Thishelps maintain drivingper-
formance andreduces thechance of
vehicle damage orloss ofcontrol.
When thissituation occurs,theCon-
tinuously Variable Transmission (CVT)
position indicator lightwillblink and
the chime willsound.
. Inthe manual shiftmode, thetransmis-
sion automatically shiftsdownto1st
gear before thevehicle comestoa
stop. When accelerating again,itis
necessary toshift uptothe desired
range.
. When theCVT fluidtemperature isextre-
mely low,the manual shiftmode maynot
work andautomatically shiftasadrive mode.
This isnot amalfunction. Inthis case, return
the shift lever tothe D(Drive) position and
drive forawhile andthen shifttothe manual
shift mode.
. When theCVT fluidtemperature ishigh, the
shift range mayupshift atalower engine
speed thanusual. Thisisnot amalfunction.
Accelerator downshiftÐInDposition Ð
GUID-BF3E0 6A6-2637-42C1-966D-5E 30031CA744
For passing orhill climbing, fullydepress the
accelerator pedaltothe floor. Thisshifts the
transmission downintoalower gear,depending
on the vehicle speed.
High fluidtemperature protectionmode
GUID-CE86 9FBC-89CE -4D62-AEC8 -660F5235AF 18
This transmission hasahigh fluidtemperature
protection mode.Ifthe fluid temperature be-
comes toohigh (forexample, whenclimbing
steep grades inhigh temperature withheavy
loads) ,engine powerand,under somecondi-
tions, vehicle speedwillbedecreased auto-
matically toreduce thechance oftransmission
damage. Vehicle speed canbecontrolled with
the accelerator pedal,buttheengine andvehicle
speed maybelimited.
Fail-safe
GUID-EA 910347-92 E1-44D4-92 56-120D487E42CA
If the vehicle isdriven underextreme
conditions, suchasexcessive wheelspin-
ning andsubsequent hardbraking, the
fail-safe systemmaybeactivated. TheMIL
may illuminate toindicate thefail-safe
mode isactivated. (SeeªMalfunction In-
dicator Light(MIL)º (P.2-18) .)This will
occur evenifall electrical circuitsare
functioning properly.Inthis case, place
the ignition switchinthe OFF position and
wait for10seconds. Thenturntheswitch
Starting anddriving
5-17
&RQGLWLRQ


> (GLW   0RGHO )'@
5-26
Starting anddriving
GUID-3CB 05FA0-A686-4 8B9-AC8C-D8BD471B4 E3D
PRECAUTION SON CRUISE CON-
TROL
GUID-C1B 3FBF6-66A0 -4E6D-A05B-28AC5FADAA48
. Ifthe cruise control system malfunctions, it
will cancel automatically .The CRUISE in-
dicator lightonthe meter panelwillthen
blink towarn thedriver.
. Ifthe engine coolant temperature becomes
excessively high,thecruise control system
will cancel automatically .
. Ifthe CRUISE indicator lightblinks, turnthe
cruise control MAINswitch offand have the
system checked byaNISSAN dealer.
. The CRUISE indicator lightmayblink when
the cruise control MAINswitch isturned ON
while pushing theACCEL/RES, COAST/
SET orCANCEL switch.To properly setthe
cruise control system, perform thefollowing
procedures.
WARNING
Do not use thecruise control when
driving underthefollowing conditions:
. when itis not possible tokeep the
vehicle ataset speed
. inheavy traffic orintraffic that
varies inspeed .
onwinding orhilly roads
. on slippery roads(rain,snow, ice,
etc .)
. invery windy areas
Doing socould cause aloss ofvehicle
control andresult inan accident.
CAUTION
On Manual Transmission (MT)models,
do not shift intoN(Neutral) without
depressing theclutch pedalwhenthe
cruise control isset. Should thisoccur,
depress theclutch pedalandturn the
MAIN switch offimmediately. Failureto
do somay cause engine
damage.
SSD1128
1. ACCEL/RES switch
2. COAST/SET switch
3. CANCEL switch
4. MAIN (ON´OFF) switch
CRUISE CONTROL OPERATIONS
GUID-F2559 FA0-5502 -40A0-AC47- 17C1EEC38DDF
The cruise control allowsdriving ataspeed
between 25to89 MPH (40to144 km/h)
without keeping yourfootonthe accelerator
pedal.
T o turn onthe cruise control, pushtheMAIN
switch on.The CRUISE indicator lightwill
illuminate.
T o set cruising speed,accelerate thevehicle
to the desired speed,pushtheCOAST/SET
switch andrelease it.Take your footoffthe
CRUISE CONTROL
&RQGLWLRQ


> (GLW   0RGHO )'@
accelerator pedal.Your vehicle willmaintain the
set speed.
. To pass another vehicle,depressthe
accelerator pedal.Whenyourelease the
pedal, thevehicle willreturn tothe previously
set speed.
. The vehicle maynotmaintain thesetspeed
on winding orhilly roads. Ifthis happens,
drive without thecruise control.
T o cancel thepreset speed, useone ofthe
following methods:
a) PushtheCANCEL switch.
b) Tap the brake pedal.
c) Turn theMAIN switch off.The CRUISE indicator
light willturn off.
. Ifyou depress thebrake pedalwhilepushing
the ACCEL/RES orCOAST/SET switchand
reset atthe cruising speed,thecruise
control willdisengage. Turn theMAIN switch
off once andthen turniton again.
. The cruise control willautomatically cancelif
the vehicle slowsmorethan8MPH (13
km/h) below thesetspeed.
. Ifyou move theshift lever tothe N(Neutral)
position (Continuously Variable Transmis-
sion models) ordepressing theclutch pedal
(Manual Transmission models),the cruise
control willbecanceled. T
o reset atafaster cruising speed,useone
of the following methods:
. Depress theaccelerator pedal.Whenthe
vehicle attainsthedesired speed,pushand
release theCOAST/SET switch.
. Push andhold theACCEL/RES switch.
When thevehicle attainsthedesired speed,
release theswitch.
. Push, thenquickly release theACCEL/RES
switch. Eachtimeyoudothis, thesetspeed
will increase byabout 1MPH (1.6km/h) .
T o reset ataslower cruising speed,useone
of the following methods:
. Lightly tapthebrake pedal. Whenthe
vehicle attainsthedesired speed,pushthe
COAST/SET switchandrelease it.
. Push andhold theCOAST/SET switch.
Release theswitch whenthevehicle slows
down tothe desired speed.
. Push, thenquickly release theCOAST/SET
switch. Eachtimeyoudothis, thesetspeed
will decrease byabout 1MPH (1.6km/h) .
T o resume thepreset speed, pushand
release theACCEL/RES switch.Thevehicle
will resume thelast setcruising speedwhenthe
vehicle speedisover 25MPH (40km/h) .
GUID-EC2F D794-8914-4CC0-A38E-2BDC09 CE9FF5
CAUTION
During thefirst 1,200 miles (2,000 km),
follow theserecommendations toob-
tain maximum engineperformance and
ensure thefuture reliability andecono-
my ofyour newvehicle. Failureto
follow theserecommendations may
result inshortened enginelifeand
reduced engineperformance.
. Avoid driving forlong periods atconstant
speed, eitherfastorslow .Do not run the
engine over4,000 rpm.
. Donot accelerate atfull throttle inany gear.
. Avoid quickstarts.
. Avoid hardbraking asmuch aspossible.
Starting anddriving
5-27
BREAK-IN SCHEDULE
&RQGLWLRQ