
Child restraint systems 
Seat and restraint systems 4-13
4
the pre-tensioners quickly 
 draw back seat belt 
webbing and increase se 
at belt performance. 
The seat belt pre-tensioner system includes the following components: 
The airbag control unit  
monitors the readiness 
of the electronic parts of the system wheneverthe electric motor switch is in the “ON” or “START” position. Thes 
e include all of the 
items listed above a 
nd all related wiring. 
The pre-tensioner seat  
belt system will oper- 
ate only when the electric motor switch is in the “ON” or “START” position.When the seat belt pre-tensioners activate, some smoke is released 
 and a loud noise will 
be heard. The smoke is 
 not harmful, but care 
should be taken not to in 
tentionally inhale it, 
as it may cause some  
temporary irritation to 
people with respiratory problems. The pre-tensioners activa 
te in the event of a 
moderate-to-severe front 
 or side impact, even 
if the seat belt is not being worn. The seat belt pre-tensioners may not  
activate in certain 
frontal collisions, even though the vehiclemay appear to be se 
verely damaged. Such 
non-activation does not mean something is wrong with the seat belt pre-tensioner system,but rather that the collision forces were not severe enough or not of the type to activate the system.
N00408700124
This warning light tells you if there is a prob-lem involving the SRS airbags and/or the pre- tensioner seat belts. Refer to “SRS warning light” on page 4-26.
N00408900113
In the event of an accident, the seat belt forcelimiter system will help reduce the forceapplied to the driver a 
nd front seat passenger.
N00407101737
When transporting infants or small children in your vehicle, an appr 
opriate child restraint 
system must always be  
used. This is required 
by law in the U.S. and Canada. 
1- SRS warning light 2- Front impact sensors  3- Seat belt pr 
e-tensioners  
4- Airbag control unit  5- Side impact sensors 
WA R N I N G The seat belt pre-tensioner system is designed to work only 
 once. After the seat 
belt pre-tensioners have been activated,they will not work again. They must promptly be replaced and the entire seat belt pre-tensioner system inspected by acertified i-MiEV dealer. 
SRS warning light  Force limiter system Child restraint systems 
BK0209800US.book  13 ページ  2014年1月14日 火曜日 午前9時26分 

Supplemental Restraint System (SRS) - airbag 
Seat and restraint systems 4-21
4
retractors for automatic locking when in the Automatic Locking Retractor function. The entire seat belt assembly should be replaced if the webbing shows any obvious cuts, tears, increase in thickness in any sec- tion of the webbing from broken fibers, orsevere fading from sunlig 
ht. All of these con- 
ditions indicate a weakening of the belt, which may adversely affe 
ct seat belt perfor- 
mance in an accident.
N00407701775
This vehicle is equippe 
d with a Supplemental 
Restraint System (SRS), which includes air-bags for the driver and passengers. The SRS front airbags are designed to supple- ment the primary protection of the driver and front passenger seat  
belt systems by provid- 
ing those occupants w 
ith protection against 
head and chest injuries  
in certain moderate to 
severe frontal 
 collisions.  
The SRS front airbags, together with sensors at the front of the  
vehicle and sensors 
attached to the front seats, form an advanced airbag system. The SRS side airbags and the curtain airbags are also designed to supp 
lement the seat belts. 
The SRS side airbags provide the driver and front passenger with pr 
otection against chest, 
abdomen and hip injuries by deploying the bag on the side impacted in moderate to severe side impact collisions. The SRS cur-tain airbags provide the driver and passengers on the front seat and rear seat with protection against head injuries by deploying a bag onthe side impacted in m 
oderate to severe side 
impact collisions. The SRS airbags are NOT a substitute for use of the seat belts. For maximum protection inall types of accident 
s, seat belts must 
ALWAYS be worn by everyone who drives or rides in this vehicle  
(with infants and small 
children in an appropriate child restraint sys- tem in the rear seat, and older children buck- led in the rear seat). Re 
fer to “Child restraint 
systems” on page 4-13. 
WA R N I N G Do not attempt to repair or replace any part of the seat belt assemblies. This workshould be done by a certified i-MiEV dealer. Failure to have a certified i-MiEV dealer perform the work could reduce theeffectiveness of the belts and could result in a serious injury or  
death in an accident.
Supplemental Restraint Sys- tem (SRS) - airbag 
WA R N I N G IT IS VERY IMPORTANT TO ALWAYS WEAR YOUR SEAT BELT PROPERLYEVEN WITH AN AIRBAG.• Seat belts help keep the driver and pas-sengers properly positioned. Thisreduces the risk of injury in all collisions, and reduces the risk of serious injuries or death when the  
airbags inflate. 
During sudden braking just before a col- lision, an unrestra 
ined or 
improperly 
restrained driver or passengers can moveforward into direct contact with, or within close proximi 
ty to, the airbag 
when it begins to inflate.The beginning stage of 
 airbag inflation is 
the most forceful and can cause serious injuries or death if the occupant comes incontact with the airbag at this time. • Seat belts reduce the risk of injury inrollovers, rear impact collisions, and in lower-speed frontal collisions, because the airbags are not de 
signed to inflate in 
those situations.• Seat belts reduce the risk of beingthrown from your vehi 
cle in a collision or 
rollover.
 IT IS VERY IMPORTANT TO BE PROP- ERLY SEATED.• A driver or front passenger sitting tooclose to the steering wheel or instrument panel during airbag deployment can beseriously injured or killed.
BK0209800US.book  21 ページ  2014年1月14日 火曜日 午前9時26分 

Supplemental Restraint System (SRS) - airbag 
Seat and restraint systems 4-23
4
N00407800489
The SRS includes the following components: 
The airbag control unit monitors the readiness of the electronic parts of the system wheneverthe electric motor switch is in the “ON” or “START” position. These include all of the items listed above a 
nd all related wiring. 
The airbags will operate only when the elec- tric motor switch is in the “ON” or “START” position.  When the impact sensors detect a sufficient front or side impact to deploy the airbag(s),the appropriate airbag 
(s) will be deployed.
WA R N I N GFRONT-FACING CHILD RESTRAINT SYSTEMS should be used in the rear seatwhenever possible. If they must be used in the front passenger seat, move the seat to the most rearward po 
sition and make sure 
the child stays in the child restraint sys- tem, properly restrained. Failure to follow these instructions could result in seriousinjury or death to the child.Airbag
WA R N I N G Older children should be seated in the rear seat with thei 
r seat belt properly 
worn, and with an  
appropriate booster 
seat if needed. Refer to “Children  
who have outgrown 
child restraint systems” on page 4-20.
How the Supplemental  Restraint System works 1- Driver’s airbag  2- SRS warning light 3- Passenger’s airbag off indicator 4- Front impact sensors5- Passenger’s front airbag 6- Driver’s seat position sensor
7- Passenger’s seat oc 
cupant classifica- 
tion sensor system 
8- Airbag control unit 9- Side airbag modules 10- Curtain airbag modules 11- Side impact sensors
BK0209800US.book  23 ページ  2014年1月14日 火曜日 午前9時26分 

Supplemental Restraint System (SRS) - airbag 4-24 Seat and restraint systems
4
When airbags deploy, so 
me smoke is released 
accompanied by a loud noise. The smoke isnot harmful, but do not intentionally inhale the smoke as it may ca 
use temporary irrita- 
tion to people with respiratory problems. After deployment, the airbags will quickly deflate, so quickly th 
at some people may not 
even realize the airbags inflated. Airbag inflation does  
not prevent the driver 
from seeing or being able 
 to steer the vehicle, 
and does not prevent people from leaving the vehicle.
N00418600227
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, incertain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that 
 will assist in under- 
standing how a vehicle’s systems performed. The EDR is designed to  
record data related to 
vehicle dynamics and sa 
fety systems for a 
short period of time,  
typically 30 seconds or 
less. The EDR in this vehicle is designed to record such data as:  How various systems 
in your vehicle were 
operating;  Whether or not the driver safety belt was buckled/fastened;  How far (if at all) the driver was depress- ing the accelerator and/or brake pedal; and,  How fast the vehicle was traveling. 
These data can help provide a better under- standing of the circumstances in which crashes and injuries occur. To read data recorded 
 by an EDR, special 
equipment is required, a 
nd access to the vehi- 
cle or the EDR is needed. In addition to the vehicle manufacturer, ot 
her parties, such as 
law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the EDR.
N00417900210
The driver’s seat position sensor is attachedto the seat rail and provides the airbag control unit with information on the seat’s fore-aft position. The airbag control unit controlsdeployment of the driver’s front airbag in accordance with the information it receives from this sensor.If there is a problem involving the driver’s seat position sensor, the SRS warning light in the instrument panel will come on. Refer to“SRS warning light” on page 4-26.
CAUTION Airbags inflate very quickly and with great force. In certain situ 
ations, contact with an 
inflating airbag may cause small cuts, abra- sions, and bruises.
Event Data Recording 
NOTE
 EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no dataare recorded by the EDR under normal driv- ing conditions and no  
personal data (e.g., 
name, gender, age, and crash location) arerecorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifyingdata routinely acquire 
d during a crash inves- 
tigation.
Driver’s seat position sensor 
WA R N I N G If the SRS warning 
light comes on, have 
the vehicle inspected by a certified i-MiEV dealer as soon 
 as possible.
Please observe the following instructions to ensure that the driver’s seat position sensor can operate correctly.• Adjust the seat to the correct position,and sit well back  
against the seatback. 
Refer to “Front seats” on page 4-3.• Do not recline the seatback more thannecessary when driving.
BK0209800US.book  24 ページ  2014年1月14日 火曜日 午前9時26分 

Supplemental Restraint System (SRS) - airbag 
Seat and restraint systems 4-25
4
N00418000351
The passenger’s seat oc 
cupant classification 
sensor system is attach 
ed to the front passen- 
ger seat cushion and provides the airbag con- trol unit with information regarding theoccupant on the front passenger seat. The air- bag control unit controls deployment of the passenger’s front airbag in accordance withthe information it receives from this system. The passenger’s front ai 
rbag will not deploy 
in an impact when the system senses no occu-pant on the front passenger’s seat or a child in a child restraint system. In this case, the pas- senger’s airbag off i 
ndicator will come on. 
Refer to “Passenger’s ai 
rbag off indicator” on 
page 4-25. If there is a problem involving the passen-ger’s seat occupant cl 
assification sensor sys- 
tem, the SRS warning light in the instrument panel will come on. Refer to “SRS warninglight” page 4-26.
N00418100310
The passenger’s airbag off indicator islocated in the instrument panel.
• Do not place metallic objects or luggage under the front seat.
 If the vehicle is involved in a severe impact, have the SRS sensor inspected by a certified i-MiEV deal 
er as soon as possi- 
ble.
Passenger’s seat occupant clas- sification sensor system 
WA R N I N G
WA R N I N G If any of the follow
ing conditions occur, 
you should immediatel 
y have your vehicle 
inspected by a certified i-MiEV dealer assoon as possible:• The SRS warning light does not initiallycome on when the electric motor switch is turned to the “ON” or “START” posi- tion.• The SRS warning light does not go outafter several seconds.• The SRS warning li 
ght comes on while 
you are driving.
 To ensure that the passenger’s seat occu- pant classification sensor system can sensecorrectly, observe the following instruc- tions. Failure to follow these instructions can adversely affect 
 the performance of 
the passenger’s airbag system.• Adjust the seat to the correct position,and sit well back  
against the seatback. 
Refer to “Front seats” on page 4-3.• Do not recline the seatback more thannecessary.• Never have more than one person (adultor child) sitting 
 on the seat.
• Do not place anything between the seat and the floor console.• When attaching a chil 
d restraint system, 
secure it firmly.• Do not place luggage  
or other objects on 
the seat.• Do not use a seat cover or a cushion.
• Do not modify or re 
place the seat and 
seat belt.• Do not place luggage or other objects under the seat.• Do not place and use  
an electronic device 
such as a computer on the seat.• Do not place heavy objects on the seat orstick pins, needles, or other objects into it.• Do not remove the seat cushion skin.• If any liquid is spilled on the seat, wipe it and dry the seat 
 immediately.
If the vehicle is involved in a severe impact, have the SRS sensors inspected by a certified i-MiEV deal 
er as soon as possi- 
ble.
Passenger’s airbag off indicator 
WA R N I N G
BK0209800US.book  25 ページ  2014年1月14日 火曜日 午前9時26分 

Supplemental Restraint System (SRS) - airbag 4-26 Seat and restraint systems
4
The indicator normally comes on when the electric motor switch is turned to the “ON” position and goes out a  
few seconds later. 
In the following situations, the indicator will stay on to show that the passenger’s front air- bag is not operational.  The front passenger’s seat is not occupied.  The system senses that a child is in the child restraint system on the front passen-ger’s seat. 
When the passenger’s seat occupant classifi- cation sensor system senses there is a person seated in the front passenger’s seat, the indi-cator goes out to show that the passenger’s front airbag is operational.
N00408301606
There is a Supplemental Restraint System (SRS) warning light on  
the instrument panel. 
The system checks itself every time the elec- tric motor switch is turned on. The SRS warn- ing light will come on  
for several seconds and 
then go out. This is normal and means the system is working properly. If there is a prob- 
lem involving one or more of the SRS com- ponents, the warning light will come on andstay on. The SRS warning light is shared by the SRS airbag and the seat belt pre-tensioner system.
WA R N I N G If any of the following conditions occur, you should immediat 
ely have the airbag 
system in your vehicle inspected by a cer-tified i-MiEV dealer as soon as possible:• The passenger’s airbag off indicatorcomes on when an adult is sitting on the front passenger seat.• The passenger’s airbag off indicator doesnot come on when the front passenger’s seat is not occupied.• The passenger’s airbag off indicator doesnot come on when the electric motorswitch is turned to the “ON” position.• The passenger’s airbag off indicatorcomes on and goes out repeatedly.
 Do not attach any ac
cessory to your vehi- 
cle that makes the passenger’s airbag off indicator difficult or impossible to see. You must be able to see the passenger’sairbag off indicator and verify the status of the passenger’s airbag system.
SRS warning light 
WA R N I N G If any of the follow
ing conditions occur, 
there may be a proble 
m with the SRS air- 
bags and/or seat belt pre-tensioners, andthey may not function  
properly in a colli- 
sion or may suddenly 
 activate without a 
collision:• Even when the electric motor switch is in“ON” position, the  
SRS warning light 
does not come on or it remains on.• The SRS warning li 
ght comes on while 
driving. 
BK0209800US.book  26 ページ  2014年1月14日 火曜日 午前9時26分 

Electric power steering system (EPS) 
Features and controls 5-27
5
N00531700590
Avoid hard braking and high-speed driving. Stop the vehicle in a safe place, put the selec- tor lever to the “P” (PARK) position and turn off the electric motor unit. Restart the electric motor unit and check tosee whether the light goes out after a few minutes driving; if it then remains off during driving, there is no problem.However, if the warning light does not disap- pear, or if it comes on  
again when the vehicle 
is driven, we recommend you to have thevehicle checked. The ABS and brake force distribution func- tion may not work, so hard braking could make the vehicle unstable.Avoid hard braking and high-speed driving. Stop the vehicle in a safe place and we rec- ommend you to have th 
e vehicle checked.
N00568400058
The power steering system operates while the electric motor unit is running. It helps reduce the effort needed to turn the steering wheel. The power steering system has mechanicalsteering capability in ca 
se the power assist is 
lost. If the power assist is lost for some rea- son, you will still be able to steer your vehi-cle, but you will notice it takes much more effort to steer. If this happens, have your vehi- cle inspected at a certified i-MiEV dealer.
If the warning light illuminates  while driving If only the ABS warning light illu- minate  If the ABS warning light and  brake warning light illuminate at  the same time 
NOTE
 The warning light may 
be illuminated when 
the electric motor unit is started while the12V starter battery voltage 
 is low, but this is 
not an ABS malfunction. When the main drive lithium-ion battery is charged, the 12V starte 
r battery is charged at 
the same time, and the  
warning light will go 
out. If the warning light does  
not go out or illumi- 
nates from time to time even after the battery is charged, take your ve 
hicle to a certified i- 
MiEV dealer and have  
the system checked as 
soon as possible.  After driving on snow or icy roads, remove any snow and ice whic 
h may have been left 
around the wheels. On ve 
hicles that have an 
anti-lock braking system, be careful not todamage the wheel spee 
d sensors (A) or the 
cables located at each wheel.Front
Electric power steering sys- tem (EPS) Rear
BK0209800US.book  27 ページ  2014年1月14日 火曜日 午前9時26分 

Tire pressure monitoring system 5-30 Features and controls
5
N00546900053
The indicators should illuminate when the electric motor switch is turned to the “ON” position, and should turn 
 off after a few sec- 
onds.If the indicator stays on  
or does not illuminate 
when the electric motor switch is turned to the “ON” position, have the vehicle inspectedby a certified i-MiEV de 
aler as soon as possi- 
ble.  indicator blinks when the ASC is operat- ing.  indicator is illuminated when the ASC is deactivated.
N00530201537
The tire pressure monitoring system uses tire inflation pressure sensors (A) on the wheels to monitor the tire inflation pressures. The 
system only indicates wh 
en a tire is signifi- 
cantly under-inflated.
 If you continue to press the ASC OFF switch after the ASC is turned off, the “mistakenoperation protection f 
unction” will activate 
and the ASC will turn back on.
ASC indicator, ASC OFF indi- cator 
CAUTION When   indicator blinks, the ASC is oper- ating, which means that the road is slippery or that your vehicle’ 
s wheels are beginning 
to slip. If this happens, drive slower.NOTE
CAUTION If an abnormal condition occurs in the sys- tem while driving, the   and   indicators will illuminate. In these cases, follow these procedures:• Park your vehicle in  
a safe place and stop 
the electric motor unit. Restart the electric motor unit again and check whether the  and   indicators go out 
. If these indicators 
go out, there is no abnormal condition. If the   and   indicators remain on even after your vehicle is driven a short distance after re-starting the electric motor unit, have the vehicle inspected by a certified i- MiEV dealer as soon as possible.
 When towing the vehicle with only the rear wheels raised off the ground, do not placethe electric motor switch in the “ON” posi- tion. Placing the electric motor switch in the “ON” position could ca 
use the ASC to oper- 
ate, resulting in an accident. For details, refer to  
“Towing” on page 8-12.
Tire pressure monitoring  system 
NOTE
 The tire pressure monitoring system is not a substitute for regularly 
 checking tire infla- 
tion pressures. Be sure to check the tire inflation pressures as described in “Tires” on page 9-10.
BK0209800US.book  30 ページ  2014年1月14日 火曜日 午前9時26分