2015 MERCEDES-BENZ SLS AMG GT ROADSTER display

session,
thesystem guidesyou through the
training withspoken instructions.
X Select System £
Settings £
Voice Control £
Start New <001F000E0004000900160009000400150001000C0009001D000100140009000F
000EF .
You seeand hear aprompt askingwhether
you woul dlike further information.
X Select Yes or
No .
If you select No ,
the first part of
individua lizationbegins. Youhear aprompt
asking whether youwoul dlike totrain the
system innumbers orinvoice commands.
Aft erselecting Yes ,
you seeaninformation
displa yand hear information regardingthe
individua lizationprocess. Thefirst part of
individua lizationthenbegins automaticall y.
or
X To clos ethe display: Pressn.
You hear aprompt askingwhether you
woul dlike totrain thesystem innumbers
or invoice commands. At
the end ofthe first part, youwillsee a
prompt askingwhether youwish tobegin the
second part.
X Select Yes or
No .
If you select No ,
individua lizationwillbe
canceled. Thedata from thefirst part is
stored automaticall y.
If you select Yes ,
the second partwillbegin.
Individual izationiscompleted atthe end of
the second part.Youwillsee acorresponding
message. Thedata from thesecond partis
stored automaticall y. Cance
lingtheFirst orSeco ndPart of
<001F000E0004000900160009000400150001000C0009001D000100140009000F
000EF X
Select Cancel .
Ap rompt appears asking whethe ryou
really dowish tocancel.
X Select Yes or
No .
If you select Yes ,
individuali zationwillbe
canceled. Thedata from thecurrent partis
not stored.
If you select No ,
the current partbegins
again.
Dele tingExisting Individualiza tionData X
Select System £
Settings £
Voice Control £
Delete Individualiz
ation .
Ap rompt appears asking whethe ryou
really wishtodelete.
X Select Yes or
No .
The individuali zationdatawilleither be
deleted ornot ,depending onyour
selection. Youwillsee acorrespon ding
message.
Switching Individualiza tionOnand Off X
Select System £
Settings £
Voice Control £
Individualiz ationOn .
You have switched individuali zationonÇ
or off c. Voice
Control
45SystemSettings

1
Curr ently co nn ect edR and auth orized
dev ice(Ò icon)
2 Devic eno tw ithin rangebut prev iously
author ized(¿appears ingrey)
3 Newly detected devic ewithin rangebut
not yetauthor ized(noÒ icon yet)
i Ifthe devic elist isalready full,youwillbe
asked tode-aut horizeadevic e
(Y page 48).If COMA NDdoes notdete ct
your Bluet oothdevic e,ext ern al
author ization may benec essary
(Y page 48). Displa
yingDetails AboutaBluet ooth
Device
X Call upthe Bluet oothdevic elist
(Y page 46).
X Selec tthe desired device.
X Select Options £
Details .
The detailed displayfor this device
appea rs.
X To close thedetailed view:Rotate
ymzor slideomp .
or
X Press n. Authoriz
ingaBluet ooth Device
X Call upthe Bluet oothdevic elist
(Y page 46).
X Selec tUpda te .X
Selec tthe current lyunauthorized device
(no Ò icon yet).
X Select Options £
Authorize .
The input menu forthe passcode appears. i
The passcode isany one tosixteen- digit
number whichyoucan determine yourself.
You must enter thesame number in
COMAND andalso inthe device tobe
authorized. Alsoobserve theinformation in
your mobile phone's operating
instruct ions.Ifyou want toreauthorize a
device thathasbeen de-authorized, you
may select adifferent passcode. Youmust
enter thesame number onCOMAND and
on the device tobe authorized. Pleasealso
refer tothe instruct ionsinthe mobile
phone operating guide.
X To enter apassc odeinCOMA ND:Press
the numbe rkeys inturn.
or
X Rota teymzor slideompand selectthe
required numberfromthesmart speller.
Then confirm withn.R epeat theoperatin g
step asoften asnec essary.
X To cancel anentry inCOMAND:
Select Back .
X To confirm anentry inCOMAND:
Select nand then press d.
X En ter the same passcode intothe
Bluetoot hdevice (seetheoperatin g
inst ruct ions forthe device).
The device isauthoriz ed. Bluet
ooth®
47System Settings

Rev
okingAutho rizationfor a
Blue toothDevic e
X Ca llup the Bluetoo thdev icelist
(Y page 46).
X Sel ect the authori zeddevice.
X Sel ect Opti ons £
De-a uthorize .
Ap rompt appears asking whethe ryou
really wishtorevoke authorization forthis
device.
X Select Yes or
No .
If you select Yes ,
the authorization forthe
device willberevoked.
i Ifyou revoke authorization foradevice
which hasbeen authorized inthe past and
which isnot detect edinthe search, this
device willnolonger bedisplay edinthe
device list.
Devices whichhavebeen authorized inthe
past butwhich arenot detect edinthe
search areeither notswitched onornot in
the vehicle. External
Authorization
If COMAND doesnotdetect yourBluetooth
device, thismay bedue toparticular security
sett ings ofyour device. Inthis case, youcan
test ifyour Bluetooth devicecanfind
COMAND. COMAND'sBluetooth device
name is"MB Bluetooth".
X Call upthe Bluetooth devicelist
(Y page 46).
X Select Update £
Options £
External authorizatio n .
X Start theBluetooth searchonthe Bluetooth
device (seeoperating instructions forthe
correspon dingdevice).
X Select COMAND ("MBBluetooth").
X En ter the passcode onthe Bluetooth device
when requested toand then input itin
COMAND. Rear
View Camera
COMAND showsthecamera pictureonthe
display when
R the funct ionisswitched oninthe System Settings menu
and
R the vehicle isshifted intoreverse gear
As soon asyou shift outofreverse gear,the
previous displayisshown. Switching
On/OfftheDisplay ofthe
Rear View Camera
X Switch toSystem Menu System
settings menu withRear View Camera
option
X Select Settings £
Rear ViewCamera .
X Select Activation byRgear .
Dependin gon the previous statethe
funct ionisswitched onÇ oroffc. Reset
i You canfully reset COMAND tothe
factor ysett ings. Thisprocess deletesall
personal data,among otherthings, (e.g.
station memory, addressbookentries,
entr iesinthe destination memoryandin
the last destination sof the navigation
system). Itis recomm endedthatyou
perform areset before thevehicle is
handed overorsold, forexample. 48
ResetSystem
Settings

X
Sel ect System £
Settings £
Reset .
Ap rompt appears asking whethe ryou wish
to reset.
X Select Yes or
No .
If you select Yes ,
a prompt willappear again
asking whether youreally wishtoreset.
X Select Yes or
No .
If you select Yes ,
a message willbeshown.
COMAND isreset andrestart ed. Language
Setting
This funct ionallows youtodetermin ethe
language forthe menu display sand the
nav igati on mes sage s.The langu agesel ecti on
af fects theinputoptio ns inthe editing and
sma rtspe ller.
X Sel ect System £
Settings £
Lan guage .
The list of langu ages appe ars. The Rdot
ind icates the current setting.
X To select alanguag e:Rota teymzor
slide qmr .
The selection movesupand down.
X To confirm thelanguage selection:
Press n.
COMAND loadstheselected language and
sets it.
i Ifyou change thesystem language, the
language forVoice Controlwill bealso be
changed. Ifthe selected language isnot
supported bythe Voice Controlsystem,
“En glish” willbeselected. Language
Setting
49SystemSettings

COMAN
Dfea tures
Thes eOper atingIn st ruc tions desc ribeall
st andar dand optionalequipm enta vail able
for you rCOMAND systematthe time of
purcha se.Cou ntry-specifi cdeviation sare
possible. Pleasenotethat your COMAND
system maynotbeequipped withallthe
features described. Introd
uction Safet
yInstr uctions G
WARN
ING
For safety reasons, onlyenteradestin ation
when thevehicle isstat ionary. Whenthe
vehicle isin motion ,ap assen gershoul dent er
th edest ination.Stud yma nua land select
rou tebefor edri vin g.
Bea rin mi nd tha tat asp ee dof jus t30 mph
(a pp roxi mately50 km/h) ,yo ur veh icleis
cove ringadi sta nce of44 feet(appro ximately
14 m)ever ysec ond.
COMA NDcalc ulate sth erout etothe
destination withouttakingaccount ofthe
following:
R Traffic lights
R Stop andright- of-way-signs
R Lane merging
R Parking orstopping prohibited areas
R Other roadandtraffic rulesandregulations
R Narrow bridges G
WARNING
COMAND maygiveincorr ectnavigation
commands ifthe data inthe digital mapdoes
not correspon dwith theactual road/traff ic
situation. Digitalmapsdonot cover allareas
nor allroutes withinanarea. Forexample, if
the traffic routing hasbeen changed orthe
direction ofaone-way roadhasbeen
reversed.
For this reason, youmust alway sobserve
applicable roadandtraffic rulesand regulations
duringyourjourney. Roadand
traffic rulesandregulations alwayshave
priority overthenavigation commands
generated bythe system. G
WARNING
Navigation announcementsare inten dedto
direct youwhile driving without diverting your
atten tionfrom theroad anddriving.
Please alwaysuse this feature instead of
consultin gthe map display fordirection s.
Consulting thesymbols ormap display for
direction smay cause youtodivert your
atten tionfrom driving andincrease yourrisk
of an accident . Upda
tingtheMap Software
The digital dataforthe map software will
become obsolete, justlikeconv ention alroad
maps. Optimum routeguidance bythe
navigation systemisonly achieved withup-
to- date mapsoftware. Information onnew
map software versionsisavaila blefrom an
authorized Mercedes-B enzCenter.
You canhave themap software updatedthere
by means ofaDVD orperform theupdate
process yourself.
Notes onDVD Discs R
Only touch thediscs atthe edges.
R Handle thediscs withcare inorder to
prevent readingerrors.
R Avoid scratc hing,leaving fingerprin tsand
dust onthe discs.
R Use acommerc iallyavaila blecleaning cloth
to clean discs. Always wipeinastraight line
from theinside outwards, neverinacircular
motion .
R Aft eruse, putthediscs backintothebox.
R Protec tthe discs fromheatanddirect
sunlight. 52
Introdu
ctionNavigation

Upd
ateSequence The
sequenc einc ludes thefollowing stages:
R Loading DVDintothe DVD changer
R Update process
i The update processmay takebetween 60
and 150 minut es,dependin gon the size of
the map software.
If possible, performtheupdate whenthe
vehicle isstationary. TheDVD readspeed
is faster whenthevehicle isstationary than
when thevehicle ismoving andtheupdate
therefore takeslesstime. Ifyou perform
the update withtheengine offand the
vehicle battery isno longer powerful
enough, COMAND mayshut off
automatically duringtheprocess toprotect
the battery. Inthis case, restart theupdate
with theengine running.
You caninterrupt theupdate process and
cont inue itat later time. Ifyou cancel the
update process, thenavigation systemis
not ready foroperation. G
WARNING
Never leavetheengine running inan enclosed
space. Theexhaust gasescontaincarbon
monoxide. Inhalingexhaustgasesconstitutes
a health hazard andcould leadtoloss of
consc iousness oreven death.
Loading DVDsintoDVD Changer The
DVD changer isamagazine withsixbuilt-
in compartmen ts. 1
Disc slot
2 Load button
X Press theLoad button 2.
Am enu indicat eswhich magazine
compart mentsare curren tlyloaded.
X To select anempt ymaga zine
compar tment: Rotate ymzor slide
omp .
X To start loadin g:Pre ssn.
The message Ple ase Insert Disc wi
llbe displ ayed .
X Inse rtthe DVD intotheslot 2 with the
pri nted side upwa rds .
The DVD change rpu lls in the DVD. The
mes sage Loa dingDis c ... wi
llbe
di spl ayed .
i Ifthe magazine isfull,y ou will first need
to eject adisc.
Upda teProcess The
update process startsonce theDVD has
been loaded.
COMAND checkswhether themap software
on the DVD matches thevehicle's navigation
system andsystem software.
Map Software isnot suitable forthe
Navigat ionSystem orthe System
Software
Am essage isdisplayed statingthat the
navigation updateDVDwiththenew map
data isnot suitable forthe system orthe
system software.
COMAND ejectsthe DVD . Introd
uction
53Navigation Z

X
Remo vetheDV Dfrom thes lot.
X Have thesyst emsoft ware updated byan
author izedMerc edes- BenzCent er.
i Itwill only bepossible toupdate themap
soft ware oncethe system software has
been updated.
Map Softwar emat ches theNav igation
System andthecurr entSystem Software
COMAND checkswhether theDVD 'smap
data hasalready beeninstalled.
Map Data Isalrea dyinstalled
The version release andacorr espondin g
message willbegiven onthe display.
X To confirm message: Pressn.
COMAND ejectsthe DVD .
Map Data isnot yetinstalled
The version release andaquery astowhether
the update shouldbecarried outwill begiven
on the display.
X Select Yes or
No .
If No is
select ed,COMAND ejectsthe DVD
automatic allyand themap data isnot
updated.
X Remove theDVD from theslot.
If Yes is
select ed,the map data isupdated.
Upda tingtheMap Data
While theupdate isin progress, a
corr espondin gmessage andaprogress bar
are displayed. Theprogress barfills from left
to right overthecourse ofthe update. The
navigation systemisnot func tionaluntil the
update iscomplet e.
You cann otejec tthe DVD during theupdate.
If you switch COMAND offduring theupdate,
this willinterrupt theupdate andtheupdate
will resume atthe point ofinterruption when
the system isrestarted.
While updating, COMAND mayprompt youto
change theDVD .Acorrespondin gmessage
is then display ed. X
Press theLoad button 8.
The magazine menuappears. Themagazine
compartm entcont aining thecurrent discis
highlighted.
X Press 9.
COMAND ejectsthe DVD .
X Remove theDVD from theslot.
X Insert theDVD requested byCOMAND.
If the update hasbeen completed
successfully, acorrespon dingmessage is
display ed.
X To confirm message: Pressn.
COMAND ejectsthe DVD .
X Remove theDVD from theslot.
The update iscomplete.
If the update hasnotbeen completed
successfully, amessage isdisplay ed
indicating thatthemap update isnot
possible.
X To confirm message: Pressn.
COMAND ejectsthe DVD .
X Remove theDVD from theslot.
An unsucessful updatemaybecaused byone
of the following:
R DVD dirtyorscratc hed.
R Overheating asaresult ofexcessively high
temperat uresinthe passenger
compartm ent. Input
Restriction
There isan input restriction forvehicles in
cert aincount ries.
The restr iction isactive forvehicle speeds
above approx. 3mph (approx. 5km/ h).The
restr iction isdeactivated assoon asthe
speed fallsbelow approx. 2mph(approx.
3 km/ h).
Certain entries cann otbe made whenthe
rest riction isactiv e,e.g. acit yor road entry.
This isindicat edbythe fact that certainmenu
items cannotbe select ed. 54
Intr
oduct ionNavigat ion

Gene
ralInfo rmat ion
Operational Readinessofthe
Navigation SystemaftertheSystem
Software Update Sometimes
theinstall edmap software isno
longer compatib lefollo wing asystem
software update byan authorized Mercede s-
Benz Center. Inthis case, thenaviga tion
system isnot opera tional.
X To update mapsoftware :Proceed as
describ edinthe “Upda teProcess” section
(Y page 53).Usemap software compatib le
with thesystem software .
i Plea senote thatinthis case theupdate
must runthrough righttothe end. Ifyou
cancel beforeh and,thenaviga tionsystem
wil lstill notberead yfor opera tion.
After start-up orinitia lstart-up, thenaviga tion
system mustperform aposi tion finding
opera tion.Asaresul t,you may have todrive
for some timeuntilprecise routeguidance
takes place.
GPS Rece ption The
correct functioning ofthe naviga tion
system isals odepe ndent onthe GPS
reception. Incertain situations, theGPS
reception maybeimpa ired, distorted oreven
imposs ible, e.g. intunnels, multi-storey car
parks ordue tosnow onthe GPS antenna. If
there issnow onthe GPS antenna, youshou ld
remove it.The GPS antenna isat the rear on
the vehicle 'sroof.
Route Guidance afterVehic leTransport After
vehicle transport (e.g.byferry, cartrain
or by towing) COMAND mustdetermine the
vehicle locationagain.
Position findingtakesplaceautomatically
when thevehicle isdriven offagain, evenif
COMAND isswitched off.The actual length of
time mayvaryfrom casetocase. While
thevehicle isdetermin ingitsposition,
route guidance issubject tothe following
restric tions:
R Navigation announcements,route
guidance displaysand display edstreet
names donot match theactual location.
R COMAND doesnotissue anynavigation
announc ements.
R The message OffMapped Road and
a
direction arrowaredisplay edinstead ofthe
route guidance displays.The arrow
indicates thedirection ofthe destination .
i Direct ionarrow accuracy isalso
dependent oncorrec tvehicle position
and/or direction.
Onc ethe position findingoperation hasbeen
complet ed,route guidance takesplaceagain
via navigation announcementsand route
guidance displays.
Interr upting Journey during Rout e
Guida nce i
Aninterruption inthe journ eymeans
parkin gthe vehicle andswitch ingoffthe
vehicle.
The continuation ofthe journ eymeans
switch ingthe vehicle onagain and
con tinuing todrive.
If you interrupt thejourn eyduring route
guidance andcontinue itlater, thefollowing
applies:
R Ifyou continue the journ eywithin 2hours,
COMAND automatically continues route
guidance.
R Ifyou cont inue thejourney after2hours,
route guidance iscanceled. Youwillhave
to cont inue thecanceled routeguidance
again manually (Ypage 89).
Measur ementUnits The
measurement unitsdisplay edin
navigation modeareidentical tothose setin
the instr ument cluster. Introdu
ction
55Navigation Z