2015 MERCEDES-BENZ S-Class set tv

X
To select Dynamic Multicontour Seat
Dynamic Multicontour Seat:
turn and press the controller.
You can select:
R 0
0: Off
R 1
1: Level 1 (weak)
R 2
2: Level 2 (strong)
X To select the setting: turn the controller.
X To exit the menu: press the0038button.
Seat heating balance The balance function controls the distribution
of heat on the seat backrest and cushion.
The balance function influences the currently
set heating level of the seat heating (see the
vehicle Operator's Manual).
X Call up the seat functions (Y page 63).
X To select Seat Heating Balance
Seat Heating Balance: turn
and press the controller.
X To select the seat: slide 009500520096the control-
ler.
X To change the setting: turn the controller.
You will see the changes you have made in
the settings display.
The settings represent the following:
R 0
0 — the backrest and seat cushion are
evenly heated according to the setting
selected with the seat heating button.
R 1 1to 3
3— the heat output to the seat cushion
is reduced one level at a time.
R -1
-1 to-3
-3 — the heat output to the backrest is
reduced one level at a time.
X To exit the menu: press the0038button. Massage programs
Overview You can select the following massage pro-
grams:
R
Hot Relaxing Massage, Back
Hot Relaxing Massage, Back
Relaxing massage program starting in the
pelvic area, warm pressure points can be
felt, full back massage, stretching the pel-
vic area, ending with gentle soothing move-
ments
R Hot Relaxing Massage, Shoulders
Hot Relaxing Massage, Shoulders
Relaxing massage program starting in the
pelvic area, warm pressure points can be
felt, full back massage, stretching the pel-
vic area, ending with gentle soothing move-
ments
R Activating Massage Activating Massage
Activating massage through increasing
twin-waves and then soothing movements
R Classic Massage Classic Massage
Massage with increasing waves, soothing
movements
R Mobilizing Massage Mobilizing Massage
Mobilization of the spinal column and the
complete upper body by means of pressure
point mobilizing massage at chest height
R Active Workout Active Workout
The Active Workout program requires your
active participation. It is suitable for train-
ing your stomach muscles during a traffic
jam, for example, by means of targeted
tensing and relaxing. You can use the pro-
gram to be sporty in the vehicle. Seats
65Vehicle functions

As soon as you feel a pressure point in the
backrest cushion, this indicates that you
should press against this point.
- As soon as you feel pressure on your
back, press against it.
- Keep the pressure under your feet even.
Do not wedge yourself against the ped-
als.
- You will feel how your stomach muscles
tense.
- Continue to breathe normally, do not
hold your breath.
- When the pressure in the backrest cush-
ion stops, stop pressing against it and
relax briefly.
Selecting a massage program X
Call up the seat functions (Y page 63).
X To select Massage
Massage: turn and press the con-
troller.
X To select the seat: slide 009500520096the control-
ler.
X To select a massage program (1 to 6): turn
and press the controller.
The massage program runs for approx-
imately 15 to 25 minutes, depending on the
setting.
X To change the massage intensity: turn the
controller to 0043and press to confirm.
The intensity changes between gentle and
vigorous each time the controller is
pressed.
X To exit the menu: press the0038button. Resetting all adjustments
X
Call up the seat functions (Y page 63).
X Select a seat (Y page 63).
X To select Reset Reset: turn and press the con-
troller.
X To select the seat: slide 009500520096the control-
ler.
X To reset: press the controller.
A prompt appears.
X To select Yes
YesorNo
No: turn and press the con-
troller.
If you select No Nothe process is canceled.
After selecting Yes
Yesall seat adjustments are
reset to the default values (factory setting). Climate control settings
Overview
You have the following options for adjusting
climate control settings:
R using the climate control bar
R using the climate control menu
You can set the most important climate
control functions such as temperature, air-
flow and air distribution using the climate
control bar. The climate control bar is visible
in most displays.
You can find all the climate control functions
in the climate control menu. You can use the climate control bar (Y page 67) to switch to
the climate control menu. 66
Climate control settingsVehicle functions

Settings in the climate control bar
Overview You can set the most important climate
control functions directly in the climate
control bar and change them in the climate
control menu.
0043
Adjusts temperature, airflow and air dis-
tribution, left, as well as displaying the
current setting
0044 Calls up the climate control menu and dis-
plays the current cooling and airflow set-
ting
0087 Adjusts temperature, airflow and air dis-
tribution, right, as well as displaying the
current setting
To switch to the climate control bar:
X Press the 00D4button.
The vehicle menu is displayed.
X Slide 6, release, then slide 6again,
turn and press the controller.
A menu appears.
Calling up the climate control bar X
Press the 00D4button.
The vehicle menu is displayed.
X Slide 6the controller repeatedly until the
climate control bar is activated. Setting the temperature X
Call up the climate control bar
(Y page 67)
X To select the current temperature on the
left or right: turn and press the controller.
The temperature setting scale appears.
X To change the setting: turn the controller.
i You can also use the climate control menu
(Y page 68) to set the temperature.
Setting the airflow X
Call up the climate control bar.
(Y page 67)
X To select 0096on the left or right: turn and
press the controller.
The airflow setting scale appears.
X To change the setting: turn the controller.
i You can also use the climate control menu
(Y page 68) to set the airflow. Climate control settings
67Vehicle functions

Setting the air distribution
X
Call up the climate control bar
(Y page 67)
X To select the current air distribution display
on the left or right, e.g. 009B: turn and
press the controller.
The air distribution setting scale appears.
X To change the setting: turn the controller.
i You can also use the climate control menu
(Y page 67) to set the air distribution. Settings in the climate menu
Overview In the climate control menu there are settings
available in the bottom bar and the main area.
Calling up the climate control menu X
Switch to the climate control bar
(Y page 67).
X To select from climate control bar 0044: turn
and press the controller.
The menu for selecting climate control
functions is activated.
X To select the desired climate control func-
tion: turn and press the controller.
The selected climate control function
appears.
Switching climate control on/off This setting is made in the bottom bar of the
climate control menu.
X Call up the climate control menu
(Y page 68).
X To switch to the footer: slide 6the con-
troller.
X To select 0073 0073Climate Ctrl On
Climate Ctrl On: turn and
press the controller.
The climate control is switched on 0073or off
0053 depending on the settings.
If the climate control is switched off:
R the climate control setting functions are
deactivated.
R the blower is switched off.
R the air recirculation flaps are closed.
Switching cooling with air dehumidifi-
cation on/off This setting is made in the bottom bar of the
climate control menu.68
Climate control settingsVehicle functions

i
Activating the cooling with air dehumidi-
fication facilitates the cooling of the vehicle
interior even with high outside tempera-
tures.
X Call up the climate control menu
(Y page 68).
X To switch to the footer: slide 6the con-
troller.
X To select A/C A/C: turn and press the controller.
X Switch cooling with air dehumidification on
0073 or off 0053.
i The current status of the cooling function
is displayed in the climate control bar: A/C ON – activated, A/C OFF – deactivated
(Y page 67).
i Deactivating the cooling with air dehu-
midification function reduces fuel con-
sumption.
Synchronizing the climate control set-
tings This setting is made in the bottom bar of the
climate control menu.
With the 0073
0073 Sync Sync (synchronization) option,
you can decide whether you wish to activate
the climate control settings for all zones
together or separately.
X Call up the climate control menu
(Y page 68).
X To switch to the footer: slide 6the con-
troller.
X To select 0073
0073Sync
Sync: turn and press the con-
troller.
X Switch the synchronization function on 0073
or off 0053. With the synchronization function switched
off, you can alternate between driver and
front passenger.
X To switch from the footer to the main area:
slide 5the controller.
X To switch between left and right: slide
1 the controller.
Not all climate control functions allow
switching between the driver and front
passenger.
Further information (see the vehicle Opera-
tor's Manual).
Rear-compartment air conditioning set-
tings This setting is made in the bottom bar of the
climate control menu.
You can also set the rear-compartment air
conditioning from the front.
X Call up the climate control menu
(Y page 68).
X To switch to the footer: slide 005200C5the con-
troller.
X To select Rear Setting Rear Setting: turn and press
the controller.
Activate the rear-compartment climate
control settings. The vehicle interior dis-
play changes accordingly.
X To switch the setting back to the front
again: select Return to Front Return to Front.
After a short time, COMAND automatically switches the adjustment functions back to
the front. Climate control settings
69Vehicle functions

Adjusting the footwell temperature
This setting is made in the main area of the
climate control menu.
X Call up the climate control menu
(Y page 68).
X To select Adjust Footwell Adjust Footwell: turn and
press the controller.
X If necessary, change sides: slide 009500520096the
controller.
X To change the setting: turn and press the
controller.
Exiting a menu X Press the 0038button.
Adjusting the climate mode settings This setting is made in the main area of the
climate control menu.
By setting the climate mode you determine
the type of airflow. The setting is only active
when the air-conditioning system is set to
0058 (see the vehicle Operator's Manual). X
Call up the climate control menu
(Y page 68).
X To select Climate Mode
Climate Mode: turn and press
the controller.
X If necessary, change sides: slide 1the
controller.
X To change the setting: turn the controller.
Exiting a menu X Press the 0038button.
The current airflow setting is shown in the cli- mate control bar: DIFFUSE DIFFUSE,MEDIUM
MEDIUMorFOCUS
FOCUS
(Y page 67).
Starting/stopping the perfume atom-
izer This setting is made in the main area of the
climate control menu.
The perfume atomizer makes it possible to
scent the air in individual compartments in
the vehicle interior. Further information on
the perfume atomizer (see the vehicle Oper-
ator's Manual).
X Call up the climate control menu
(Y page 68).
X To select Air Freshener Air Freshener : turn and press
the controller.
The setting element is active.
X To start/stop the perfume atomizer: press
the controller.
X To set the intensity: turn the controller
when the atomizer is switched on.
Exiting a menu
X Press the 0038button. 70
Climate control settingsVehicle functions

Switching the ionization on/off
This setting is made in the main area of the
climate control menu.
The ionization has a cleansing effect on the air in the vehicle interior. Further information
(see the vehicle Operator's Manual).
X Call up the climate control menu
(Y page 68).
X To select Ionization Ionization: turn and press the
controller.
The setting element is active.
X To switch the ionization on/off: press the
controller.
Exiting a menu X Press the 0038button.
Auxiliary heating This setting is made in the main area of the
climate control menu.
You can pre-set three departure times for
automatic activation of the auxiliary heating. Selecting the pre-set time:
X Call up the climate control menu
(Y page 68).
X To select Auxiliary Heating
Auxiliary Heating: turn and
press the controller.
X Turn the controller.
Changing the pre-set time:
X Call up the climate control menu
(Y page 68).
X To select Auxiliary Heating Auxiliary Heating: turn and
press the controller.
X To select the departure time that will be
changed: turn and press the controller.
A menu for changing the time opens. X
To select the required setting element (ana-
log clock, hours or minutes): slide 5and
9 the controller.
X To change the setting: turn the controller.
X To exit the menu: press the controller. Climate control settings
71Vehicle functions

Child-proof locks
Switching the rear compartment dis-
plays on/off This function serves to switch the rear-com-
partment displays on/off.
X Press the 00D4button.
The vehicle menu is displayed.
X To select Parental Control
Parental Control: turn and
press the controller.
The menu to select the side in the rear
compartment is activated.
X Select Rear Left Rear Left orRear Right
Rear Right.
X To switch Display
Display on/off: turn the con-
troller.
Exiting the vehicle settings: X To select 0039: slide 005200C5and press the
controller. Locking/unlocking rear compart-
ment displays
This function serves to lock/unlock the rear-
compartment displays.
X Press the 00D4button.
The vehicle menu is displayed.
X To select Parental Control
Parental Control: turn and
press the controller.
The menu to select the side in the rear
compartment is activated. X
Select Rear Left Rear Left orRear Right
Rear Right.
X To select Lock
Lockto lock/unlock the rear
compartment displays: slide 00520096and press
the controller.
The display is locked, a corresponding mes- sage with 0037appears on the screen.
Unlock Unlock appears in the display.
Exiting the vehicle settings: X To select 0039: slide 005200C5and press the
controller.
i The volume can still be adjusted if you
have locked the rear compartment display. It can also be switched on/off using the
integrated switch. 360° camera
Important notes
The 360° camera is only an aid. It is not a
replacement for your attention to your imme- diate surroundings. You are always responsi-
ble for safe maneuvering and parking. Make
sure that no persons or animals are in the
maneuvering range. Overview
The 360° camera surveys the vehicle sur-
roundings and assists you, for example when
parking or at exits with reduced visibility.
For further information on the 360° camera,
see the separate vehicle Operator's Manual. Settings for the 360° camera
When you activate the Activation by R Activation by R
gear
gear function, the image from the 360° cam-
era is displayed when you select reverse gear.
Activating/deactivating using the reverse
gear:
X Press the 00D4button in the center con-
sole.
The vehicle menu is displayed. 72
360° cameraVehicle functions