
phones, two-way radios) that may be being
operated in or near the vehicle.
Checking the tyr epressure electroni-
cally X
Make sure that the key is in position 2
(Y page 179) in the ignition lock.
X Press the =or; button on the steer-
ing wheel to select the Service
Servicemenu.
X Press the 9or: button to select
Tyre pressure
Tyre pressure.
X Press the abutton.
The curren ttyre pressure for each wheel
will be displayed in the multifunction dis-
play.
If the vehicle has been parked for over
20 minutes, the Tyre Tyrepressures
pressures will
willbe
be
displayed after afew minute sof
displayed after afew minute sof
driving
driving message appears.
After ateach-in period, the tyre pressure
monitor automatically detects new wheels or new sensors. As long as aclear allocation of
the tyre pressure values to the individual
wheels is not possible, the Tyre pressure Tyre pressure
monito ractive
monito ractive display message is shown
instead of the tyre pressure display. The tyre
pressures are already being monitored.
If an emergency spare wheel is fitted, for a
few minutes the system may continue to
show the tyre pressure of the wheel that has
been removed. If this occurs, not ethat the
value displayed for the position where the
spare wheel is fitted is not the same as the
curren ttyre pressure of the emergency spare
wheel.
Warning messages of the tyr epressure
monitor If the tyre pressure monitor detects
apres-
sure loss in one or more tyres, awarning mes-
sage is shown in the multifunction display and
the yellow tyre pressure monitor warning
lamp comes on.
R If the Please correc ttyre pressure
Please correc ttyre pressure
message appears in the multifunction dis- play, the tyre pressure in at least one tyre is
too low and must be corrected at the next
opportunity.
R If the Check tyre(s) Check tyre(s) message appears in
the multifunction display, the tyre pressure in one or more tyres has dropped signifi-
cantly and the tyres must be checked.
R If the Warnin gtyre defect
Warnin gtyre defect message
appears in the multifunction display, the
tyre pressure in one or more tyres has drop-
ped suddenly and the tyres must be
checked.
Observ ethe instructions and safety notes in
the display messages in the "Tyres" section
(Y page 322).
If the wheel position sonthe vehicle are inter-
changed, the tyre pressures may be displayed for the wrong position sfor as hort time. After
af ew minutes of driving, this is rectified and
the tyre pressures are displayed for the cor-
rect positions.
Restarting the tyr epressure monitor When you restart the tyre pressure monitor,
all existing warning messages are deleted and
the warning lamps go out. The monitor uses
the currently set tyre pressures as the refer-
enc evalues for monitoring. In most cases, the
tyre pressure monitor will automatically
detec tthe new referenc evalues after you
have changed the tyre pressure. However,
you can also define referenc evalues man-
ually as described here. The tyre pressure
monitor then monitors the new tyre pressure values.
X Use the table on the inside of the fuel filler
flap to ensure that the tyre pressure is set
correctly in all four tyres for the current
operatin gconditions.
Also observe the notes in the section on
tyre pressures (Y page 420).
X Make sure that the key is in position 2in the
ignition lock.
X Press the =or; button on the steer-
ing wheel to select the Service Servicemenu. 424
Tyrep
ressureWheels and tyres

X
Remove th ekeyfrom th eignition lock.
or, on vehicles wit hKEYLESS‑GO:
X Ope nthe driver's door.
The on-boar delectronics no whaves tatus
0 .T his is th esam east hekeyh avin gbeen
removed.
X Remove th eStart/Sto pbutto nfromt he
ignition loc k(Ypage 179).
X If included in th evehicl eequipment,
remove th etyre-chang etoolkitfrom the
vehicl e(Ypage 395).
X Safeguar dthe vehicl eagainst rollin gaway.
i Apart from som
ecountry-specific var-
iants ,vehicles are no tequipped wit htyre-
changin gtools. Some tools for changin ga
whee lare specific to th evehicle. Fo rmore
information on whic htools are require dto
perfor mawheelcha ng eony our vehicle,
consult aqualified specialist workshop.
Necessary tyre-changin gtools may
include, for example:
R Jack
R Wheel chock
R Wheel wrench
Securing th evehicle against rolling
away If your vehicl
eisequipped wit hawheelchock,
it can be found in th etyre-chang etoolkit
( Y page 395).
The foldin gwhee lchock is an additional
securin gmeasure to preven tthe vehicl efrom rollin
gaway, for exampl ewhen changin ga
wheel.
X Fold bot hplates upwards :.
X Fold out lower plate ;.
X Guide th elugs on th elower plat efully into
th eo penings in base plate =. Securin
gthe vehicl eonlevel ground (example:
Saloon)
X On level ground: placechock soro ther
suitable items under th efront and rear of
th ew hee ltha tisd iagonally opposit ethe
whee lyou wish to change. Securin
gthe vehicl eons light downhill gradients
(example: Saloon)
X On sligh tdownhil lgradie nts:place
chocks or other suitable items in fron tof
th ew heels of th efront and rear axle.
Raisin gthe vehicle G
WARNING
If you do no tposition th ejackc orrectly at the
appropriat ejacking poin tofthevehicle, the Changing
awheel
427Wheels and tyres
Z

X
Remove th eprotective film from th evehicle
tool ki tand put it ove rthe collapsible emer-
gency spar ewheel.
X Stow th ecollapsible emergenc yspare
whee lintheemergenc yspar ew hee lwell
under th eboot/luggag ecom partment. Inflating th
ecollapsible emergency
spar ewheel
! Inflat
ethe collapsible emergenc yspare
whee lusin gthe tyreinflation compressor
before lowerin gthe vehicle. The whee lrim
could otherwise be damaged.
! Do no
toperate th etyrei nflation com-
presso rfor longer than eigh tminute sata
time without abreak. It may otherwise
overheat.
The tyr einflation compressor can be oper-
ate dagain once it has cooled down. X
Moun tthe collapsible emergenc yspare
whee lasd escribed (Y page 426).
The collapsible emergenc yspar ew heel
mus tbem ountedbefore it is inflated.
X Pull connector ?and th ehoseo ut of the
housing.
X Remove th ecap from th evalveont hecol-
lapsible emergenc yspar ew heel.
X Screw union nut :of th ehoseo ntot he
valve.
X Mak esureo n/of fswitch Aof th etyre
inflation compressor is set to 0.X
Inser tconnector ?into a12Vs ocket
(Y page 366) in your vehicle.
X Turn th ekeyto position 1in th eignition
loc k(Ypage 179).
X Press on/off switch Aon th etyrei nflation
compressor to I.
The tyr einflation compressor is switched
on .The tyr eisinflated. The tyr epressur eis
shown on pressur egauge =.
X Pump th etyretot hespecified tyr epres-
sure.
The specified tyr epressur eisprinted on
th ey ellow label of th eemergenc yspare
wheel.
X Whe nthe specified tyr epressur ehas been
reached, press on/off switch Aon the
electric air pump to 0.
The tyr einflation compressor is switched
off.
X Turn th ekeyto position 0in th eignition
lock.
X If th etyrep ressur eishigher than th especi-
fie dp ressure, press pressur erelease valve
button ;until th ecorrect tyrep ressure
has been reached.
X Unscrew union nut :on th ehosef romt he
valve.
X Screw th evalvec ap onto th ecollapsible
emergenc yspar ew hee lvalv ea gain.
X Stow connector ?and th ehoseint he
lower section of th etyrei nflation compres-
sor.
X Stow th etyrei nflation compressor in the
vehicle. Emergency spar
ewheel
467Wheels and tyres Z

If you or others come into contact with fuel,
observe the following:
R Wash the fuel off any affected areasofs kin
with water and soap immediately.
R If you get fuel in youre yes,rinse them thor-
oughlyw ith clean water immediately.S eek
immediate medica lattention.
R If fuel is swallowed, seek immediate medi-
cal attention. Do not induce vomiting.
R Change any clothing that has come into
contact with fuel immediately.
Tank capacity The total capacity of the fuel tank may vary,
depending on the vehicle equipment.
Model Total capa-
city E5
00
E5 00 4MATIC 80.0 l
AMG vehicles
66.0 l
or
80.0 l All other models
59.0 l
or
80.0 l Model Of which
reserve fuel Models with 59.0
ltotal
capacity Approx.
8.0 l Models with 80.0
ltotal
capacity Approx.
9.0 l AMG vehicles
Approx.
14.0 l Petrol
Fuel grade
!
Do not use dieseltor
efuel vehicleswith a
petrol engine. Do not switch on the ignition if you accidentally refuel with the wrong
fuel.O therwise ,the fuel wille nter the fuel
system. Even small amounts of the wrong
fuel can resultind amage to the fuel system
and the engine. Notify aqualified specialist
workshop and have the fuel tank and fuel
lines drained completely.
! Only refuel using premium-grade unlea-
ded petrol with at least 95 ROZ/85 MOZ,
that conforms to Europea nstandard
EN 228 or EDIN 51626–1 or an equivalent
specification.
Fuel of this specification can contain up to
10 %ethanol.
Fuel that does not conform to EN 228 or
ED IN 51626–1 can leadtoi ncreased wear
and damage the engine and exhaust sys-
tem.
! Only use the fuel recommended. Operat-
ing the vehicle with other fuelsc an leadto
engine failure.
! Do not use the following:
R E85 (petrol with 85% ethanol)
R E100 (100% ethanol)
R M15 (petrol with 15% methanol)
R M30 (petrol with 30% methanol)
R M85 (petrol with 85% methanol)
R M100 (100% methanol)
R Petrol with additive scontaining metal
R Diesel
Do not mix such fuel switht he fuel recom-
mended for you rvehicle. Do not use addi-
tives. Otherwise ,engine damage may
occur. Thi sdoes not include cleaning addi-
tives for the remova land prevention of res-
idu eb uild-up. Petrol must only be mixed
with additive srecommended by Mercedes-
Benz; see "Additives". You can obtai nfur- 474
Service products and capacitiesTechnical data