2015 MAZDA MODEL 3 HATCHBACK display

4–131
When Driving
i-ACTIVSENSE
 


 In the following cases, the “MRCC
Cancelled” indication is displayed and
the beep sounds one time.
 

 
 The vehicle speed decreases to less
than 25 km (16 mph).
 

 
 The DSC has operated.


 
 The TCS has operated for a certain
period of time.
 

 
 The Smart Brake Support (SBS) has
operated.
 

 
 The Smart City Brake Support (SCBS)
has operated.
 

 
 When travelling on a down slope for a
long period of time.
 

 
 There is a problem with the system.


 
 The engine stalls.

(Manual transaxle)



 
 The shift lever is shifted to neutral (N)
for a certain period of time.
 

 
 The clutch is depressed for a certain
period of time.
NOTE
  The Mazda Radar Cruise Control
(MRCC) system may be cancelled
during rain, fog, snow or other
inclement weather conditions, or the
front surface of the radiator grille is
dirty.
  If the Mazda Radar Cruise
Control (MRCC) system has been
temporarily cancelled, you can return
to the previously set vehicle speed by
pressing the RESUME switch after
the following conditions have been
met.
 


 All of the Mazda Radar Cruise
Control (MRCC) operation
conditions have been met.
 


 A certain period of time has
elapsed since the system was
automatically cancelled while
driving for a long time on a down
slope.


 If the SET / SET or RESUME
switch is pressed before a certain
period of time has elapsed since the
system was automatically cancelled
while driving for a long time on a
down slope, “MRCC Not available”
is displayed in the display.
  If the ON/OFF switch (with
adjustable speed limiter) or OFF
switch (without adjustable speed
limiter) is pressed to cancel the
Mazda Radar Cruise Control
(MRCC), the system does not return
to the previously set speed even if the
RESUME switch is pressed.
.B[EB@&'&&"@&EJUJPOJOEC







4–132
When Driving
i-ACTIVSENSE
Shift-up/Shift-down Request
Display (Manual Transaxle)
The shift-up or shift-down request display
in the active driving display may be
displayed while the Mazda Radar Cruise
Control (MRCC) system is operating.
When this occurs, shift gears because the
gear position is not appropriate.
Request Indication on display
Shift up
Shift down
NOTE
  If the gears are not shifted up even
though the shift-up request indication
is displayed, load will be applied
to the engine and the Mazda Radar
Cruise Control (MRCC) system may
be automatically cancelled or engine
damage could occur.
  If the gears are not shifted down
even though the shift-down request
indication is displayed, the Mazda
Radar Cruise Control (MRCC)
system may be automatically
cancelled or engine stalling could
occur.
.B[EB@&'&&"@&EJUJPOJOEC







*Some models.4–133
When Driving
i-ACTIVSENSE
Adjustable Speed Limiter *
The adjustable speed limiter is a function to prevent the vehicle from being driven at a
vehicle speed faster than a set speed. The vehicle speed is controlled to kept it below the set
speed even if the accelerator pedal is depressed.
The adjustable speed limiter can be set between 30 km/h (20 mph) and 200 km/h (125 mph).
The vehicle speed may exceed the set speed when the vehicle is driven on a down slope,
however, the system notifi es the driver by fl ashing the display and operating a warning
sound.
WARNING
Always turn off the system when changing drivers:
If the driver is changed and the new driver is unaware of the adjustable speed limiter
function, the vehicle may not accelerate when the driver depresses the accelerator
pedal, leading to an accident.
The system consists of the adjustable speed limiter display and the speed limiter switch on
the steering wheel.
CANCEL switch
Speed limiter switchSpeed limiter switch RESUME switch Cruise Control SystemMazda Radar Cruise Control (MRCC)
SET+/SET- switchCANCEL switch
RESUME switch
SET+/SET- switch
Active Driving Display Display in the instrument cluster
With multi
information displayWithout multi
information display
.B[EB@&'&&"@&EJUJPOJOEC







4–134
When Driving
i-ACTIVSENSE
Adjustable Speed Limiter Display
The setting status of the adjustable speed limiter is displayed in the active driving display
(Type A instrument cluster *1 ) or the display in the instrument cluster (Type B instrument
cluster*1 ).
*1 To determine which instrument cluster is equipped on your Mazda, Refer to Meters and
Gauges on page 4-24 .
Stand-by display
Displays when the speed limiter switch is operated and the system is turned on.
Turns off when the system is turned off.
Active Driving Display Display in the instrument cluster
With multi-
information displayWithout multi-
information display
Setting display
Displays when the SET
/ SET switch is operated and the speed is set.
Active Driving Display Display in the instrument cluster
With multi-
information displayWithout multi-
information display
.B[EB@&'&&"@&EJUJPOJOEC







4–135
When Driving
i-ACTIVSENSE
Cancel display
Displays when any of the following operations is done and the system is temporarily
cancelled.
 


 Cancel switch is operated



 Accelerator pedal is strongly depressed
Active Driving Display Display in the instrument cluster
With multi-
information displayWithout multi-
information display
Adjustable Speed Limiter Main Indicator Light (Amber)/Adjustable Speed
Limiter Set Indicator Light (Green)
The indicator light has two colours.
Adjustable speed limiter main indicator light (amber)
The indicator light illuminates amber when the speed limiter switch is pressed and the
adjustable speed limiter is activated.
Adjustable speed limiter set indicator light (green)
The indicator light illuminates green when a speed has been set.
.B[EB@&'&&"@&EJUJPOJOEC







4–136
When Driving
i-ACTIVSENSE
Speed Limiter Warning Beep
If the vehicle speed exceeds the set speed by about 3 km/h (2 mph) or more, a warning
sound operates continuously and the adjustable speed limiter display fl ashes at the same
time. The warning sound operates and the display fl ashes until the vehicle speed decreases
to the set speed or less.
Verify the safety of the surrounding area and adjust the vehicle speed by applying the
brakes. Additionally, keep a safer distance from the vehicles behind you.
Active Driving Display Display in the instrument cluster
With multi-
information displayWithout multi-
information display
NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the
adjustable speed limiter display shows the cancel display. If the vehicle speed exceeds the
set speed by about 3 km/h (2 mph) or more while the cancel display is displayed, the set
speed display fl ashes but the warning sound is not operated.
Turning the System On/Off
Press the speed limiter switch to turn the system on. The adjustable speed limiter display is
displayed.
To turn the system off, press the speed limiter switch while the adjustable speed limiter is
displayed. The adjustable speed limiter display turns off.
.B[EB@&'&&"@&EJUJPOJOEC







4–138
When Driving
i-ACTIVSENSE
Temporarily Cancelling the System
The system is temporarily cancelled (stand-by status) when any of the following operations
is done while the adjustable speed limiter is displayed.
 


 CANCEL switch is pressed



 Accelerator pedal is strongly depressed
Press the RESUME switch to resume the operation at the previous set speed. The adjustable
speed limiter display remains displayed.
NOTE
The set speed can be set by pressing the SET or SET switch while the system is in
stand-by status.
The adjustable speed limiter is not cancelled by depressing the brake pedal.
.B[EB@&'&&"@&EJUJPOJOEC







*Some models.4–14 3
When Driving
i-ACTIVSENSE
NOTE
  In the following cases, the laser sensor (front) may inadvertently determine that there
is a vehicle ahead and the Smart City Brake Support (SCBS) system may operate.
 


 Objects on the road at the entrance to a curve.



 Vehicles passing in the opposite lane while making a curve.



 Metal objects, bumps, or protruding objects on the road.



 When passing through a toll gate.



 When passing under a vinyl curtain or fl ag.



 Plastic objects such as pylons.



 Two-wheeled vehicles, pedestrians, animals or standing trees.



 Vehicle is driven with some of the tyres having signifi cant wear. 

 When the system operates, the user is notifi ed by the fl ashing Smart City Brake
Support (SCBS) indicator light (red) and the active driving display * .   The Smart City Brake Support (SCBS) warning light (amber) turns on when the
system has a malfunction.
 Refer to Warning Lights on page 4-41 .
.B[EB@&'&&"@&EJUJPOJOEC