Page 489 of 634
488
GX 460 _O M_ OM6 0L 72U _( U)6-3. Do-it-yourself maintenance
Headlight aim
Adjustment bolt A
Adjustment bolt B
Make sure the vehicle has a full tank of gasoline and the area around the
headlight is not deformed.
Park the vehicle on level ground.
Sit in the driver’s seat.
Bounce the vehicle several times.
Vertical movement adjusting bolts
1
2
Before checking the headlight aim
1
2
3
4
GX460_OM_OM60L72U_(U).book Page 488 Friday, May 16, 2014 3:03 PM
Page 490 of 634
GX 460 _O M_ OM6 0L 72U _( U)
4896-3. Do-it-yourself maintenance
6
Maintenance and care
Using a Phillips-head screwdriver, turn bolt A in either direction.
Remember the turning direction and the number of turns.
Turn bolt B the same number of turns
and in the same direction as step .
If the headlight cannot be adjusted using
this procedure, take the vehicle to your
Lexus dealer to adjust the headlight aim.
Adjusting the headlight aim
1
XLeft-hand side XRight-hand side
2
1
GX460_OM_OM60L72U_(U).book Page 489 Friday, May 16, 2014 3:03 PM
Page 491 of 634
490
GX 460 _O M_ OM6 0L 72U _( U)6-3. Do-it-yourself maintenance
Light bulbs
Check the wattage and color of the light bulb being replaced. (
→P. 5 7 1 )
→ P. 4 5 6
■Front
You may replace the following bulbs yourself. The difficulty level of replace-
ment varies depending on the bulb. If necessary bulb replacement seems diffi-
cult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
Preparing for light bulb replacement
Removing the engine compartment covers
Bulb locations
Front turn signal light
Headlight high beam1
2
GX460_OM_OM60L72U_(U).book Page 490 Friday, May 16, 2014 3:03 PM
Page 492 of 634
GX 460 _O M_ OM6 0L 72U _( U)
4916-3. Do-it-yourself maintenance
6
Maintenance and care
■Rear
Rear turn signal light
Back-up lightRear side marker light
Running board lights1
2
3
4
GX460_OM_OM60L72U_(U).book Page 491 Friday, May 16, 2014 3:03 PM
Page 493 of 634
492
GX 460 _O M_ OM6 0L 72U _( U)6-3. Do-it-yourself maintenance
■Headlight high beams
Turn the cover counterclockwise.
Turn the bulb base counterclock-
wise.
Unplug the connector while pull-
ing the lock release.
Replacing light bulbs
1
2
3
GX460_OM_OM60L72U_(U).book Page 492 Friday, May 16, 2014 3:03 PM
Page 494 of 634
GX 460 _O M_ OM6 0L 72U _( U)
4936-3. Do-it-yourself maintenance
6
Maintenance and care
Replace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb with
the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to check
that it is not loose, turn the headlights
on once and visually confirm that no
light is leaking through the mounting.
When installing the cover, conduct in reverse.
4
5
61
GX460_OM_OM60L72U_(U).book Page 493 Friday, May 16, 2014 3:03 PM
Page 495 of 634
494
GX 460 _O M_ OM6 0L 72U _( U)6-3. Do-it-yourself maintenance
■Front turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
1
2
3
GX460_OM_OM60L72U_(U).book Page 494 Friday, May 16, 2014 3:03 PM
Page 496 of 634