2015 Lexus CT200h Navigation Manual (in English)

344
CT200h_Navi_OM76146U_(U)14.06.17 09:48
3. WHAT TO DO IF...
1. TROUBLESHOOTING
XWhen using the hands-free system with a Bluetooth® device
If there is a problem with the ha nds-free system or a Bluetooth® device, first check the
table below.
SymptomLikely causeSolution
Page
Cellular phoneThis
system
The hands-free sys-
tem or Bluetooth®
device does not
work.
The connected de-
vice may not be a
compatible
Bluetooth
® cellular
phone.
For a list of specific
devices which
operation has been
confirmed on this
system, check with
your Lexus dealer or
the following
website:
http://
www.lexus.com/
MobileLink
∗
The Bluetooth® ver-
sion of the connected
cellular phone may
be older than the
specified version.Use a cellular phone
with Bluetooth® ver-
sion 2.0 or higher
(recommended: Ver.
3.0 +EDR or higher).∗50

345
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48
8
PHONE
XWhen registering/connecting a cellular phone
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A cellular phone can-
not be registered.
An incorrect pass-
code was entered on
the cellular phone.Enter the correct
passcode on the cel-
lular phone.∗
The registration op-
eration has not been
completed on the
cellular phone side.Complete the regis-
tration operation on
the cellular phone
(approve registration
on the phone).
∗
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
∗57
A Bluetooth® con-
nection cannot be
made.
Another Bluetooth®
device is already
connected.
Manually connect
the cellular phone
you wish to use to this
system.
58
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.∗
Automatic
Bluetooth® connec-
tion on this system is
set to off.
Set automatic
Bluetooth® connec-
tion on this system to
on when the power
switch is in ACCES-
SORY or ON mode.
63

346
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48
XWhen making/receiving a call
“Unable to dial.
Please check your
phone.” message is
displayed.
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.∗
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
∗57
SymptomLikely causeSolution
Page
Cellular phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer
appears on the dis-
play.

SymptomLikely causeSolution
Page
Cellular phoneThis
system

347
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48
8
PHONE
XWhen using the phonebook
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Phonebook data
cannot be trans-
ferred manually/au-
tomatically.
The profile version of
the connected cellu-
lar phone may not be
compatible with
transferring phone-
book data.
For a list of specific
devices which
operation has been
confirmed on this
system, check with
your Lexus dealer or
the following
website:
http://
www.lexus.com/MobileLink
∗
Automatic contact
transfer function on
this system is set to
off.Set automatic con-
tact transfer function
on this system to on.329
Passcode has not
been entered on the
cellular phone.Enter the passcode
on the cellular phone
if requested (default
passcode: 1234).
∗
Transfer operation
on the cellular phone
has not completed.
Complete transfer
operation on the cel-
lular phone (approve
transfer operation on
the phone).
∗
Phonebook data
cannot be edited.Automatic contact
transfer function on
this system is set to
on.Set automatic con-
tact transfer function
on this system to off.329

348
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48
XWhen using the Bluetooth® message function
X In other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Messages cannot be
viewed.
Message transfer is
not enabled on the
cellular phone.Enable message
transfer on the cellu-
lar phone (approve
message transfer on
the phone).
∗
Automatic transfer
function on this sys-
tem is set to off.Set automatic trans-
fer function on this
system to on.341
New message notifi-
cations are not dis-
played.
Notification of SMS/
MMS/E-mail recep-
tion on this system is
set to off.Set notification of
SMS/MMS/E-mail
reception on this sys-
tem to on.
∗341
Automatic message
transfer function is
not enabled on the
cellular phone.Enable automatic
transfer function on
the cellular phone.∗
SymptomLikely causeSolution
Page
Cellular phoneThis
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the power switch is in
ACCESSORY or
ON mode.
Connection confir-
mation display on this
system is set to on.To turn off the dis-
play, set connection
confirmation display
on this system to off.
62

349
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48
8
PHONE
∗: For details, refer to the owner’s manual that came with the cellular phone.
Even though all con-
ceivable measures
have been taken, the
symptom status does
not change.
The cellular phone is
not close enough to
this system.Bring the cellular
phone closer to this
system.
Radio interference
has occurred.Turn off Wi-Fi® de-
vices or other devic-
es that may emit
radio waves.

The cellular phone is
the most likely cause
of the symptom.
Turn the cellular
phone off, remove
and reinstall the bat-
tery pack, and then
restart the cellular
phone.
∗
Enable the cellular
phone’s Bluetooth®
connection.
∗
Disable the Wi-Fi®
connection of the
cellular phone.∗
Stop the cellular
phone’s security soft-
ware and close all ap-
plications.
∗
Before using an ap-
plication installed on
the cellular phone,
carefully check its
source and how its
operation might af-
fect this system.
∗
SymptomLikely causeSolution
Page
Cellular
phoneThis
system

350
3. WHAT TO DO IF...
CT200h_Navi_OM76146U_(U)14.06.17 09:48

9
351
1
2
3
4
5
6
7
8
9
CT200h_Navi_OM76146U_(U)14.06.17 09:44
1. FUNCTIONAL OVERVIEW............... 352
2. TYPE A: FUNCTION ACHIEVED BY USING A CELLULAR
PHONE.................................................... 353
BEFORE USING THE FUNCTION ............. 355
PREPARATION BEFORE USING
LEXUS App Suite................................................ 356
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE
NAVIGATION SYSTEM ................... 358
BEFORE USING THE FUNCTION ............. 359
4. TYPE C: FUNCTION ACHIEVED BY USING DCM ................................... 361 1. LEXUS App Suite..................................... 362
USING LEXUS App Suite .................................. 362
LINKING LEXUS App Suite AND
NAVIGATION LOCAL FUNCTION ...... 367
App Suite KEYBOARD OPERATION ........ 370
2. Destination Assist..................................... 372
MAKE A CALL WITH Destination Assist .... 372
3. eDestination............................................... 374
DOWNLOADING eDestinations .................. 374
SEARCHING eDestinations .............................. 376
DISPLAYING eDestination ICONS .............. 377
4. Lexus Insider .............................................. 378
NEW MESSAGE NOTIFICATION.............. 378
VIEWING AND PLAYING RECEIVED Lexus Insider MESSAGES ............................... 379
1. LEXUS App Suite SETTINGS .............. 382
SCREEN FOR LEXUS App Suite SETTINGS .............................................................. 383
1
LEXUS ENFORM, SAFETY
CONNECT AND APP
SUITE-OVERVIEW
2
LEXUS ENFORM, SAFETY
CONNECT AND APP SUITE
OPERATION
3SETUP
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE