2015 KIA OPTIMA HYBRID Features and Functions Guide

31
Defrost Outside Windshield:
1 . Set Fan Speed to the highest position
2 . Set desired Temperature
3 . Press the Defrost button
Defog Inside Windshield:
1 . Set Fan Speed to desired position
2 . Set desired Temperature
3 . Press the Defrost button
Climate Control Auto Function
1 . Press AUTO to select Full Auto Operation
2 . Press MODE button to control which vents air flows through
3 . Press DUAL to select Dual Temperature Control Operation
REMINDERS:
•MA X A /C Mode automatically engages Recirculated Air
• Your Automatic Climate Control system may differ from those in the illustrations . See your Owner’s Manual for more details
• When in AUTO mode, Air Flow mode and Fan Speed do not display on the Climate Control Display
• Warm air may flow in through vents if Recirculated Air button is not pressed ON (LED lit)
Automatic Climate Control (Navigation System)*
Air Flow Modes
To select Air Flow Modes, press the Mode
selection buttons:
Face-Level
Bi-Level
F lo o r- L evel
Floor/Defrost-Level

•Defrost mode activates A /C and opens Fresh Air Vent to help dehumidify the air and improve Defroster performance •During Auto Operation, the A /C indicator will NOT illuminate . The fan speed, air intake, air flow and air conditioning may automatically be engaged at any time to reach desired temperature and reduce humidity •Keep inside glass as clean as possible to reduce window fogging
QUICK TIPS
REAR
FRONTREAR
FRONTCLIMATE
Fan Speed Control button
Temperature Control knob
Rear Windshield Defroster
Front Windshield Defroster
System OFF button
Mode Selection button
Air Conditioning On/Off button
Dual Temperature Control knob
Recirculated Air buttonECON (Economy Air Conditioning) button
Automatic Climate Control button Dual Climate Control Button
Climate information screen selection button
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

32
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
Sportmatic® Shifting Video
Heated and Ventilated Seats Video
QR CODES
www.KuTechVideos.com/tf23/2015
www.KuTechVideos.com/tf23/2015
P: Park
R: Reverse
N: Neutral
D: Drive

[+]: Sport Mode Upshift
[–]: Sport Mode Downshift
Sport Mode: To enter Sport mode, move shift lever from D to left gate . To shift
while in Sport mode, move shift lever up [+] to upshift or down [–] to downshift .
Automatic Gear Shift with Sportmatic® Shifting
P
R
N
D
P R
N
D
P
R
N
D

•With the seat warmer switch in the ON position, the heating system in the seat turns OFF or ON automatically depending on the seat temperature •System turns OFF when the ignition is cycled
QUICK TIPS
Press button once for high setting (2 LEDs lit),
again for low setting (1 LED lit) and again to
turn OFF .
Seat Warmers — Press top of button once
for high setting (2 LEDs lit), again for low
setting (1 LED lit) and again to turn OFF .
Ventilated Seats — Press bottom of button
once for high setting (2 LEDs lit), again for low
setting (1 LED lit) and again to turn OFF .
R
R
R
R
Yellow Color: Warming
Yellow Color: Warming
Blue Color: Ventilating
Seat Warmers/
Ventilated Seats*
Seat Warmers*
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL

33
SeatbackLumbarSeat forward/backwardSeat Cushion
Driver Position Memory System*
To store a seating position into memory, first place the shifter into P (Park)
while the ignition switch is ON . Then:
1 . Adjust the driver’s seat
2 . Press the SET button A on the control panel . System will beep once
3 . Press one of the memory buttons B within 5 seconds . The system will
beep twice when memory has been stored
4 . “Driver (1 or 2) set is memorized” will appear on the instrument cluster
LCD screen
Power Adjustable Driver’s Seat*
Move/Press controls to adjust Seat forward/backward, Seat Cushion, Seatback or Lumbar
SET
1
2
Driver Position Memory System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
A
B
CCDE
CD
E
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING

34
6-Way Manual Adjustable Driver’s Seat
Pull lever A to slide Seat forward/backward .
Pull/press lever B to adjust Seat height .
Pull lever C to adjust Seatback recline .
Press D to adjust Lumbar support
A
BD
C
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
SEATING

35
To raise headrest: Pull headrest up .
To lower headrest: Press lock A, then press the headrest down .
.Front Seat Headrest Adjustment
To adjust headrest forward: Pull headrest forward at an upward
angle to one of three positions .
To adjust headrest back: Pull headrest completely forward at an
upward angle, then release .
.
When adjusting the headrest back, you may need to raise headrest to allow space for the headrest to fully adjust backward .
QUICK TIP
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
SEATING

36
Smart Key Fob:
A Press to lock All Doors
B Press to unlock Driver’s Door . Press twice in 4 seconds to
unlock All Doors
C Press and hold to unlock Trunk and manually open
REMINDER:
• The Trunk unlocks when the Smart Key fob is within close proximity of the vehicle .
•The Trunk does not automatically open when the C button is pressed .
D Press and hold more than 1 second for Panic Alarm . To turn off
Alarm, press any button
E Press to release Mechanical Key (on reverse side of fob)

Driver’s Door Lock/Unlock button G:
• Press button once to unlock Driver’s Door
•Press again within 4 seconds to unlock All Doors
•Press again to lock All Doors
Mechanical Key F:
•Use to unlock Driver’s Door
• Use to enable/disable Child Safety Locks
Smart Key
HOLD
HOLD
G
Engine Start/Stop Button & Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
REMINDER: Remote button configuration may vary depending on vehicle options .

•If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine •The Smart Key’s signal can be blocked by the normal operation of a cell phone or smartphone . To help prevent this, store each device separately
QUICK TIPS
A
B
C
D
F
E
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES

37
One-Click Fuel Cap Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015 REMINDER: The Fuel Filler Door Release button is located on the lower part of the driver’s door panel .
CLICK!
Fuel Cap/Malfunction Indicator
(Check Engine Light)
Tighten for ONE CLICK to prevent Malfunction
Indicator from illuminating .
LockUnlock
Double-Turn Lock/Unlock All
•Turn clockwise once to unlock Driver’s Door
•Turn clockwise again within 4 seconds to unlock All Doors
•Turn counterclockwise once to lock All Doors
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
OTHER KEY FEATURES

38
Map/Room Lamps
Automatic turn off function*
The interior lights automatically turn off
approximately 30 seconds after the ENGINE
START/STOP button is OFF .
Map/Personal Lamp
Push the lens A to turn the Map Lamp ON/
OFF . This light produces a spot beam for
convenient use as a Map Lamp or Personal
Lamp for the driver or front passenger .
Room Lamp B
: In the off position, the lamp is OFF even if the door is opened .
: In the door position, the lamp turns ON when any door is opened .
: In the on position, the lamp stays on continuously .
( Type A )( Type B)
REMINDER: Sunshade needs to remain OPEN while Sunroof is open and vehicle is moving .
Panoramic Sunroof Operation*
The Sunroof and Sunshade operation is controlled through a
multidirectional switch/lever, and the ignition needs to be in the ON
position to operate the Sunroof/Sunshade .
Slide the Sunshade and Sunroof:
•Auto Open: Slide lever C backward to
the farthest position and release .
•Auto Close (Sunroof only): Slide the lever C forward to the farthest position
and release .
Slide the Sunshade:
•Open: Slide the lever C partially backward to the first detent position .
•Auto Close: Slide the lever C forward to the farthest position .
Slide the Sunroof (with Sunshade open):
•Open: Slide the lever C backward and release .
•Close: Slide the lever C partially forward to the first detent position or
pull the lever downward .
Tilt the Sunroof:
•Raise: Push lever C upward .
•Lower: Pull lever C downward .
•Auto Close: Slide the lever C forward to the farthest position .

•When doors are unlocked by the Smart Key*, the lamp turns ON for approximately 30 seconds •If your vehicle is equipped with the theft alarm system, the interior lights automatically turn off approximately 3 seconds after the system is in armed stage •Using interior lights for an extended period of time may cause battery discharge
QUICK TIPS
To stop the Sunroof/Sunshade at any position, push or pull the Sunroof control lever in any direction .
QUICK TIP
A
AA
B
B
C
(Buttons located on overhead controls)(Buttons located on overhead controls)
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES