2015 JEEP GRAND CHEROKEE SRT Owners Manual

Page 145 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual move in the direction of the switch. Release the switch
when the desired position has been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull
upward or pus

Page 146 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual CAUTION!
Do not place any article under a power seat or
impede its ability to move as it may cause damage to
the seat controls. Seat travel may become limited if
movement is stopped by an obstruction

Page 147 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual the lumbar support. Pushing upward or downward on
the switch will raise and lower the position of the
support.Manual Front Seats Forward/Rearward
Adjustment
Some models may be equipped with a manual f

Page 148 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual While sitting in the seat, lift up on the bar located under
the seat cushion and move the seat forward or rearward.
Release the bar once you have reached the desired
position. Then, using body pressur

Page 149 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual WARNING!
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt,
which could result in serious inj

Page 150 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual WARNING!
•Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes,
spinal cord injury, medication, alcohol use, exhaus-
tion or other physical condition mu

Page 151 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual NOTE:
•Once a heat setting is selected, heat will be felt within
two to five minutes.
•The engine must be running for the heated seats to
operate.
Vehicles Equipped With Remote Start
On models tha

Page 152 of 636

JEEP GRAND CHEROKEE 2015 WK2 / 4.G SRT Owners Manual You can choose from HI, LO or OFF heat settings. Amber
indicator lights in each switch indicate the level of heat in
use. Two indicator lights will illuminate for HI, one for
LO and none for OFF.
Push