5. Air conditioning On / Off
The air conditioning is designed to operate effectively in all seasons,
with
the windows closed.
Electric control panel
F
P
ress the button to recirculate
the
interior
air.
The
indicator
l
amp
comes
on
to
confirm
this.
F
P
ress
the
button
again
to
allow
fresh
air
i
nto
the
passenger
compartment.
The
i
ndicator
lamp
goes
off
to
confirm
this. It
enables
you to:
-
l
ower
the temperature, in summer,
-
i
ncrease the effectiveness of the demisting
i
n
winter, above 3 °C.Switching on
F Press the "A /C " button, the button's
indicator lamp comes on.
Switching off
F Press the "A /C " button again, the button's i
ndicator lamp goes off.
Switching
off may affect comfort levels
(
humidity,
c
ondensation).
The
air conditioning does not operate
w
hen the air flow adjustment control 2
is in position " 0".
To obtain cooled air more quickly, you
c
an use recirculation of interior air for
a few moments. Then return to fresh
a
ir intake.
93
Front demist - defrost
With the heating /
ventilation system
F Put the temperature and air flow controls to t
he dedicated marked position.
F
P
ut the air intake control to the "Exterior air
i
ntake" position
(
manual control to the right or electric
c
ontrol with indicator lamp off).
F
P
ut the air distribution control to the
"
Windscreen"
p
osition.
These
markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows.
With the manual air
conditioning system
F Put
the temperature and air flow controls to t
he dedicated marked position.
F
P
ut the air intake control to the "Exterior air
i
ntake" position
(
manual control to the right or electric
c
ontrol with indicator lamp off).
F
P
ut the air distribution control to the
"
Windscreen"
p
osition.
F
S
witch on the air conditioning by pressing
t
he "A /C "
button; the associated green
w
arning lamp comes on. With
Stop & Start, when the demisting,
a
ir conditioning and air flow functions a
re activated, STOP mode is not a
vailable.
Comfort
Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO" button. T
he "AUTO" symbol is displayed.
We
recommend that you use
t
his mode. It provides optimised
a
utomatic
control of all of the following
f
unctions:
passenger compartment
t
emperature, air flow, air distribution and air
i
ntake,
in
accordance with the comfort value
t
hat
you
have chosen.
This
system is designed to operate effectively
i
n
all
seasons, with the windows closed. For
your comfort, when the engine is
s
witched off, the settings are retained
u
ntil the engine is switched on again.
To prevent too great a distribution of
c
old air when the engine is cold, the air
f
low will only reach its optimum level
g
radually.
2. Temperature adjustment
The value indicated on the display corresponds t
o a level of comfort and not to a temperature in
d
egrees Celsius or Fahrenheit. On
entering the vehicle, if the interior
i
s very cold or hot, there is no need to
c
hange the value displayed in order
t
o reach the required level of comfort.
T
he system corrects the temperature
d
ifference automatically and as quickly
a
s possible.
Press the " 5"
and "6 " buttons to
change
this value. A setting around
t
he value 21
enables optimum
c
omfort to be obtained. However,
d
epending on your requirements, a
s
etting between 18 and 24 is usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay not be sufficient for rapid
d
emisting or defrosting of the
w
indscreen and side windows
(
humidity,
several passengers, ice, etc.).
In
this
case, select the automatic visibility
p
rogramme. The button 3 indicator lamp
comes
on.
The
system automatically controls the air
c
onditioning and the flow of air and provides
o
ptimum
air distribution to the windscreen and
s
ide
windows. It deactivates air recirculation 5.
To
exit
this programme, press button 3 again
or "AUTO" ,
the indicator lamp on the button
g
oes
off
and "AUTO"
is displayed.
With
Stop & Start, when demisting has
b
een activated, the STOP mode is not
a
vailable.
6. Air distribution adjustment
Pressing this button several times in succession enables the air flow to be
directed
in turn towards:
-
t
he
windscreen and the side windows
(
demisting or defrosting),
-
t
he
windscreen, side windows and air
ve
nts,
-
t
he
windscreen, the side windows, the air
v
ents
and the footwells,
-
t
he
windscreen, the side windows and the
f
ootwells,
-
t
he
footwells,
-
t
he
air vents and the footwells,
-
t
he
air vents.
Avoid driving for long periods with the air conditioning switched off (risk of misting a
nd reduction of the air quality in the cabin).
Press the "full fan" button to
increase the air flow.
7. Air flow adjustment
The air flow symbol, the fan, fills progressively according to the value requested.
Press the "empty fan" button to
decrease
the air flow.
Switching the system off
Press the air flow "empty fan"
button 7 until the fan symbol
d
isappears.
This action switches off all of the functions of
the
air
conditioning system.
Thermal
comfort is no longer controlled.
A s
light
flow of air resulting from the movement
o
f
the
vehicle, remains perceptible however.
Pressing
the air flow "full fan" button 7 or
on "AUTO"
reactivates the system with the
v
alues
set before it was switched off.
173
Curtain airbags
System which contributes towards improving the protection of the driver and passengers (with the e
xception of the rear centre passenger) in the
e
vent of a serious side impact in order to limit
t
he risk of injury to the side of the head.
Each
curtain airbag is built into the pillars and
t
he upper passenger compartment area.
deployment
The curtain airbag is deployed at the same time as the corresponding lateral airbag in the
e
vent of a serious side impact applied to all or
p
art of the side impact zone B, perpendicular
t
o the longitudinal centreline of the vehicle on a
h
orizontal plane and directed from the outside
t
owards the inside of the vehicle.
The
curtain airbag inflates between the front or
r
ear occupant of the vehicle and the windows.
Operating fault
In the event of a minor impact or bump on the side of the vehicle or if the
v
ehicle rolls over, the airbag may not be
d
eployed.
In the event of a rear or front collision,
the
airbag is not deployed.
If
this warning lamp comes on in the
i
nstrument panel, accompanied by
a
n audible signal and a message
i
n
the
screen, contact a CITROËN dealer
o
r
a
qualified workshop to have the system
c
hecked. The airbags may no longer be
d
eployed in the event of a serious impact.
Safety
187
Advice on child seats
The incorrect installation of a child seat in a vehicle compromises the child's protection
i
n the event of an accident.
Check
that there is no seat belt or seat belt
b
uckle under the child seat as this could
de
stabilise
i
t.
Remember
to fasten the seat belts or the
c
hild seat harness keeping the slack in
relation
to the child's body to a minimum,
even
for short journeys.
To
install a child seat using the vehicle's
s
eat belt, ensure that the belt is well
tightened
on the child seat and that it holds
t
he child seat firmly against the vehicle's
s
eat. If your passenger seat is adjustable,
m
ove it for ward if necessary.
On
the rear seats, always leave enough
s
pace between the front seat and:
-
a
rear ward facing child seat,
-
t
he child's feet when in a for ward facing
c
hild seat.
To
do this, move the front seat for ward and,
i
f necessary, also straighten its backrest.
Children at the front
The legislation on carrying a child on the front passenger seat is specific to each
c
o unt r y.
Refer
to the current legislation in your
c
o unt r y.
Deactivate
the passenger airbag when a
"
rear ward facing" child seat is installed on
t
he front seat. Other wise the child risks
b
eing seriously injured or killed if the airbag
i
s deployed.
Installation of a booster cushion
The chest part of the seat belt must be positioned on the child's shoulder without
t
ouching the neck.
Ensure that the lap part of the seat belt
passes
correctly over the child's thighs.
CITROËN
recommends the use of a
b
ooster seat which has a back, fitted with a
s
eat belt guide at shoulder level.
As
a safety precaution, do not leave:
-
o
ne or more children alone and
u
nsupervised in a vehicle,
-
a
child or an animal in a vehicle which
i
s exposed to the sun, with the windows
c
losed,
-
k
eys within the reach of children inside
t
he vehicle.
Use
the "child lock" to prevent any
a
ccidental opening of the rear doors or
w
indows.
Avoid
opening the rear windows by more
t
han a third.
To
protect young children from the rays of
t
he sun, fit side blinds on the rear windows.
For
optimum
installation
of
the
"for ward
f
acing"
child
seat,
ensure
that
the
back
of
t
he
child
seat
is
as
close
as
possible
to
t
he
back
of
the
vehicle's
seat,
in
contact
if
p
ossible.
You
must
remove
the
head
restraint
before
f
itting
a
child
seat
on
a
passenger
seat.
E
nsure
that
the
head
restraint
is
stowed
or
a
ttached
securely
to
prevent
it
from
being
t
hrown
around
the
vehicle
in
the
event
of
s
harp
braking.
Refit
the
head
restraint
once
t
he
child
seat
has
been
removed
Child safety
229
dashboard fusebox
The fusebox is loacted inside the glove box.
Access to the fuses
F Refer to the paragraph "Access to the tools".
Fuse tables
Fuse N°Rating Functions
FH36 5 ATrailer
relay unit.
FH37 -Not
used.
FH38 20 AHi-Fi
amplifier.
FH39 -Not
used.
FH40 40 ATrailer
relay unit.
Fuse N° Rating Functions
F1 15 ARear
wiper.
F2 -Not
used.
F3 5 AAirbags
and pretensioners control unit.
F4 10 AAir
conditioning, clutch switch, electrochromatic mirror,
p
article filter pump (Diesel), diagnostic socket, air flow
sen
sor
(
Diesel).
F5 30 AElectric
windows panel, passenger's electric window
c
ontrol, front electric window motor.
F6 30 ADriver's
electric window motor.
F7 5 ACourtesy
lamp.
Practical information
333
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
Certain traffic jams
along
the route are not
indicated
in real time. On
starting, it is several minutes before the system begins to receive the
traffic
information. Wait
until the traffic information is being received
correctly
(display of the traffic information icons on
the
map).
The
filters are too restrictive. Modify
the "Geographic filter" settings.
In
certain countries, only major routes (motorways...) are listed for the
traffic
information. This
phenomenon is normal.
The
system is
dependent
on the traffic information available.
The
altitude is not
displayed. On
starting, the initialisation of the GPS may take up to 3 minutes to
receive
more than 4 satellites correctly.Wait
until the system has started up completely.
Check
that there is a GPS coverage of at least
4 satellites
(long press on the SETUP
button, then
select
"GPS coverage").
Depending
on the geographical environment (tunnel...) or the weather,
the
conditions of reception of the GPS signal may vary.This
phenomenon is normal.
The
system
is
dependent on the GPS signal reception
conditions.
I
am
unable to connect
my
Bluetooth telephone. The
telephone's Bluetooth function may be switched off or the telephone
may
not be visible. -
Check
that your telephone's Bluetooth
function
is switched on.
-
Check
in the telephone settings that it is
"visible
to all".
The
Bluetooth telephone is not compatible with the system.You
can check the compatibility of your telephone
on
www.citroen.co.uk (services)
The
volume of the
telephone
connected
in
Bluetooth mode is
inaudible. The
volume depends both on the system and on the telephone.Increase
the volume of the audio system, to
maximum
if required, and increase the volume of
the
telephone if necessary.
The
ambient noise level has an influence on the quality of telephone
communication.Reduce
the ambient noise level (close the windows,
reduce
the booster fan speed, slow down, ...).