2015 Citroen C4 instrument panel

201
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
The programmed information is grouped together in   the   instrument   panel   screen.
6.
  S

peed   limiter   on   /   off   indication.
7.
  S

peed   limiter   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

election   of   a   memorised   speed.
Displays in the instrument panel
Speed limiter
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 S

peed   limiter   mode   selection   wheel.
2.
 P

rogrammed   value   decrease   button.
3.
 P

rogrammed   value   increase   button.
4.
 S

peed   limiter   on   /   off   button.
5.
 L

ist   of   memorised   speeds   display   button.
Steering mounted controls
Operation
System which prevents the vehicle from exceeding the speed programmed by the driver.
W hen   the   programmed   speed   limit   is   reached,   pressing   the   accelerator   pedal   no   longer   has   any  
ef

fect.
The
  speed   limiter   is   switched on
 m
anually:
 i

t   requires   a   programmed   speed   of   at   least  
2

0 mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
9
Driving

203
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Cruise control
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 C

ruise   control   mode   selection   dial.
2.
 S

peed   programming   /   value   decrease  
b

utton.
3.
 S

peed   programming   /   value   increase  
b

utton.
4.
 C

ruise   control   off   /   resume   button.
5.
 M

emorised   speeds   display   button.
Steering mounted controls
The programmed information is grouped together   in   the   instrument   panel   screen.
6.
  C

ruise   control   off   /   resume   indication.
7.
  C

ruise   control   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

electing   a   stored   speed.
Displays in the instrument panel
The cruise control is switched on m anually: it r
equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h)   and   engagement   of:
-
 
f
ourth   gear   on   the   manual   gearbox,
-
 
s
econd   gear   on   the   electronic   gearbox  
s

ystem   or   automatic   gearbox,   in   sequential  
d

riving   mode,
-
position A
  on   the   electronic   gearbox  
s

ystem   or   D   on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems,   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value.
The cruise control system cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
You
  are   advised   to   keep   your   feet   near   the   pedals   at
 a

ll   times.
System which automatically maintains the speed of the vehicle at the value programmed by the driver,   without   any   action   on   the   accelerator   pedal.
Operation
9
driving

206
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
In addition to the rear parking sensors, the front parking   sensors   are   triggered   when   an   obstacle i

s detected in front and the speed of the vehicle is
still
  below   6   mph   (10   km/h).
The
  front   parking   sensors   are   interrupted   if   the
 v

ehicle   stops   for   more   than   three   seconds   in
 f

or ward   gear,   if   no   further   obstacles   are   detected
 o

r   when   the   speed   of   the   vehicle   exceeds   6   mph
 (

10   km/h).
Front parking sensors
Deactivation/Activation of the
front and rear parking sensors
The function is deactivated by pressing this button.   The   indicator   lamp   in   the   button  
comes
  on.
Pressing
  this   button   again   reactivates   the  
f

unction.   The   indicator   lamp   in   the   button  
goes
  off.
Operating fault
In the event of a malfunction of the   system,   when   reverse   gear  
i

s   engaged   this   warning   lamp   is  
d

isplayed   in   the   instrument   panel  
a

nd/or   a   message   appears   in   the  
s

creen,   accompanied   by   an   audible  
s

ignal   (short   beep).
Contact a CITR
oËn

dealer or a
qualified
 w

orkshop.
The
 
sound
 
emitted
 
by
 
the
 
speaker
 
(front
 
or
 
r

ear)
 
indicates
 
whether
 
the
 
obstacle
 
is
 
in
 
front
 
o

r
 
behind. The function will be deactivated
automatically
 
if
 
a
 
trailer
 
is
 
being
 
towed
 
o

r
 
a
 
bicycle
 
carrier
 
is
 
fitted
 
(vehicle
 
f

itted with a towbar or bicycle carrier
recommended
 
by
 
CITROËN). In bad weather or in winter, ensure
that the sensors are not covered with
mud,
  ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,
  pneumatic   drill,   etc.)   may   trigger  
t

he
 
audible   signals   of   the   parking  
s

ensor   system.
driving

208
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Fuel tank
Capacity of the tank: approximately 60 litres.When the low fuel level in the
tank
  is   reached,   this   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   an   audible   warning  
a

nd   the   display   of   an   alert   message.  
W

hen   it   first   comes   on,   around
6
litres   of   fuel   remain   in   the   tank.
Low fuel level
Additions of fuel must be of at least 5 litres to be   registered   by   the   fuel   gauge.
Opening
  the   filler   cap   may   result   in   an   inrush   of  
a

ir.   This   vacuum   is   entirely   normal   and   results  
f

rom   the   sealing   of   the   fuel   system.
F

P
ress control A   until   the   automatic   opening  
o

f   the   fuel   flap   is   heard.
 T

his   control   remains   active   for   a   few  
m

inutes   after   switching   off   the   ignition.   If  
n

ecessary,   switch   the   ignition   on   again   to  
r

eactivate   it.
F
 
T
ake   care   to   select   the   pump   that   delivers  
t

he   correct   fuel   for   your   vehicle.If you are filling your tank to the top, do not
persist after the third cut- off; this could
cause your vehicle to malfunction. F

I
ntroduce the nozzle so as to push in the
metal
  non-return   flap   B.
F
 
M
ake   sure   that   the   nozzle   is   pushed   in   as  
f

ar   as   possible   before   starting   to   refuel  
(

risk   of   blowback).
F
 
M
aintain   this   position   while   refuelling.
F
 
P
ush   the   fuel   flap   to   close   it.
With Stop & Start, never refuel with the
system
 
in
 
STOP
 
mode;
 
you
 
must
 
switch
 
o

ff
 
the
 
ignition
 
with
 
the
 
key,
 
or
 
the
 
S

TART/STOP
 
button
 
if
 
your
 
vehicle
 
has
 
K

eyless
 
Entry
 
and
 
Starting.
Until
 
sufficient
 
fuel
 
has
 
been
 
added,
 
every
 
t

ime
 
the
 
ignition
 
is
 
switched
 
on,
 
this
 
warning
 
l

amp
 
appears,
 
accompanied
 
by
 
an
 
audible
 
s

ignal
 
and
 
an
 
alert
 
message.
 
When
 
driving,
 
t

his
 
audible
 
signal
 
and
 
the
 
display
 
of
 
this
 
a

lert
 
message
 
are
 
repeated
 
with
 
increasing
 
f

requency,
 
as
 
the
 
level
 
drops
 
towards
 
0 .
You
 
must
 
refuel
 
as
 
soon
 
as
 
possible
 
to
 
avoid
 
r

unning
 
out.
If
 
you
 
run
 
out
 
of
 
fuel
 
(Diesel),
 
refer
 
to
 
the
 
c

orresponding
 s

ection.
Refuelling
Checks

216
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the
engine
  compartment   of   your   vehicle.
F
 
U
nscrew   the   oil   filler   cap   to   reveal   the   filler  
a

perture.
F
 
A
dd   oil   in   small   quantities,   avoiding   any  
s

pills   on   engine   components   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
A
dd   more   oil   if   necessary.
F
 
A
fter   checking   the   level,   carefully   refit   the  
o

il   filler   cap   and   the   dipstick   in   its   tube.
After
  topping   up   the   oil,   the   check   when  
s

witching   on   the   ignition   with   the   oil   level  
i

ndicator   in   the   instrument   panel   is   not   valid  
d

uring   the   30   minutes   after   topping   up.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd   emission   control   system,   never   use  
a

dditives   in   the   engine   oil.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
  brake   fluid   level   should   be   close  
t

o   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Power steering
fluid level
The power steering fluid level should b
e   close   to   the   "MA X"   mark.   With   the e

ngine   cold,   unscrew   the   cap   to   check
 t

he   level.
Checks

222
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Range indicators
When switching on the ignition, an indicator gives   an   estimate   of   the   distance   that   can  
b

e   travelled   with   your   vehicle   before   engine  
s

tarting   is   automatically   prevented,   once   the  
v

ehicle   starts   using   the   reserve   of   AdBlue
® or
after
 
a
 
fault
 
is
 
detected
 
with
 
the
 
SCR
 
system.
In
 
the
 
event
 
of
 
simultaneous
 
system
 
fault
 
and  
l

ow
a
d
blu

e
® level, the shortest range is the one d
isplayed.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
W hen   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning   lamp   comes   on,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance,   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before  
e

ngine   starting   is   prevented   -   (For   example  
"

NO START   IN   900   miles"   means   that   "Starting  
w

ill   be   prevented   in   900   miles).
When
  driving,   this   display   appears   every  
1

50 miles   (300   km)   until   the   additive   tank   has  
be

en
 t
opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
The
 
engine
 
start
 
prevention
 
system
 
r

equired
 
by
 
regulations
 
is
 
activated
 
a

utomatically
 
once
 
the
 
AdBlue
® tank is e
m pt y.
Checks

223
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in   the  
i

nstrument   panel   of   "NO   START   IN"   and  
0
  km   or   miles   -   ("NO   START   IN   0   miles"   means  
"

Starting
 p
revented").
The
a d
blu
e
® tank is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before  
e

ngine   starting   is   prevented   -   (For   example  
"

NO START   IN   350   miles"   means   "Starting   will  
b

e   prevented   in   350   miles).
When
  driving,   this   display   appears   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
ot

her wise you will not be able to restart your
engine. To
  be   able   to   start   the   engine,  
w

e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou carry out the top-up yourself, it is
essential   to   add   at   least   3.8   litres   of  
a d
blu
e
® to the additive tank.
R
efer
 
to
  the   "Topping-up"   section.
10
Checks

224
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The  UREA,   SERVICE   and   diagnostic   warning  
l

amps   comes   on,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message  
"

Emissions
 f
ault".
The
  alert   is   triggered   when   driving,   when  
t

he   fault   is   detected   for   the   first   time,   then  
w

hen   switching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists.During an authorised driving phase
(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed ( after   30   miles   (50   km)   covered   with   the  
p

ermanent   display   of   the   message   signalling  
a

  fault),   the   SERVICE   and   engine   diagnostic  
w

arning   lamps   come   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance,   indicating   the   remaining   range  
e

xpress   in   miles   or   kilometres   before   engine  
s

tarting   is   prevented   -   (e.g.:   "NO   START   IN  
350
  miles"   means   "Starting   will   be   prevented  
in
  350   miles").
A
 
system
 
that
 
prevents
 
engine
 
starting
 
is
 
activated   automatically   from   650   miles   (1   100   km)   after   confirmation   of   a   fault   with   the   SCR   emissions  
c

ontrol
 
system.
 
Have
 
the
 
system
 
checked
 
by
 
a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
If
 
it
 
is
 
a
 
temporary
 
fault,
 
the
 
alert
 
d

isappears
 
during
 
the
 
next
 
journey,
 
a

fter
 
a
 
self
 
diagnosis
 
test
 
of
 
the
 
SCR
 
e

missions
 
control
 
system. While
  driving,   this   display   appears   every  
30   seconds   while   the   fault   with   the   SCR   system  
p

ersists.
The
  alert   is   repeated   when   switching   on   the  
ig

nition.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
ot

her wise, you will not be able to restart your
engine.
Checks