2015 Citroen C4 reset

32
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If you have carried out the service on your
vehicle
 y

ourself:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the ".../000" trip distance
recorder zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the screen indicates "=/0" and the
spanner
  disappears,   release   the   button.Following
  this   operation,   if   you   wish   to  d
isconnect   the   battery,   lock   the   vehicle  a
nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   registered.
Monitoring

33
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Distance recorders
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Trip distance recorder
Total distance recorder
Measures the total distance travelled by the
vehicle
  since   its   first   registration.
Measures the distance travelled since it was
last
  reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   and   hold   this  
b

utton   until   zeros   appear.
1
Monitoring

49
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Trip computer
Monochrome screen A
 The  trip   computer   provides   the   following  i
nformation:
-
 ra

nge, -
 
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
-
d
istance travelled,
-  
a
verage   fuel   consumption,
- a verage s peed.
Information displays
F Press the button, located at the end of the
wiper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.
System
  that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Zero reset
F Press
  the   control   for   more   than   two  s
econds to reset to zero the distance
travelled,
  the   average   fuel   consumption  
a

nd   the   average   speed.
F
 
T

he
 
next
 
press
 
then
 
returns
 
you
 
to
 
the
 
n

ormal
 d

isplay.
2
Multifunction screens

50
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Monochrome screen C
Information displays
You can choose between two types of display
by  pressing   button   A:
-
 t

he   trip   computer   information   appears
 t

emporarily   above   the   audio   information,
 d

isplayed   permanently   in   full   screen,


or
-
 
t
he   trip   computer   and   audio   information  
b

oth   appear   permanently   in   a   shared  
sc

reen. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  t he   current   fuel  c
onsumption,
●
 
t
he   Stop   &   Start   time  
c

ounter,
-

t
he trip "1"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   first   trip.-

t
he trip "2"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   second   trip.
F
P
ress the button, located at the end of
the wiper stalk , to display the various trip
computer   tabs   in   succession.
Trip zero reset
F When
  the   trip   required   is   displayed,   press   the b
utton   on   the   end   of   the   wiper   stalk   for   more t

han   two   seconds.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
Multifunction screens

51
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Touch screen tablet
Temporary display in a new window:
F  P ress   the   end   of   the   wiper   control   stalk   for  
a

ccess   to   the   information   and   display   the  
d

ifferent   tabs.
Display of information
Permanent display: The current instantaneous fuel
consumption
  tab   with:
-  
t
he   range,
-  
t
he   current   fuel   consumption,
-  
t
he   Stop   &   Start   time   counter.
The trip "1"
 
tab   with:
-
t
he distance travelled,
-  t he   average   fuel   consumption,
-  t he   average   speed,  
 
f

or   the   first   trip.
The trip "2"
 

tab   with:
-

t
he distance travelled,
-
 
t
he   average   fuel   consumption,
-
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
The trip computer information is displayed in the   primary   page   of   the   menu.
F

P
ress one of the buttons to display the
desired
 t

ab.
F

Sel
ect the "
Driving assistance "
menu. F
W
hen the desired trip is
displayed, press the reset button
or press and hold the end of the
wiper   control   stalk.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
2
Multifunction screens

52
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
A few definitions…
Range
(miles or km)
W
hen
 
the
 
range   falls   below   20   miles
(30
 
km),
 
dashes   are   displayed.   After   filling   with   at
 l

east
 
5
 
litres
  of   fuel,   the   range   is   recalculated   and
 i

s
 
displayed
  when   it   exceeds   60   miles   (100   km).
Current fuel consumption
(mpg or l/100 km or km/l)
Average fuel
consumption
(mpg or l/100 km or km/l)
Average speed
(mph or km/h)
Distance travelled
(miles or km)
Stop & Start time counter
(minutes / seconds or hours / minutes)
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 w

orkshop. The
 
fuel
 
consumption
 
of
 
your
 
vehicle
 
w

ill
 
be
 
higher
 
than
 
the
 
official
 
figures
 
o

btained
 
by
 
CITROËN
 
during
 
the
 
first
 
3

 
000
 
miles
 
(5
 
000
 
km)
 
of
 
the
 
vehicle's
 
l

ife.
This
 
function
 
is
 
only
 
displayed
 
from
 
2

0 mph
 
(30
 
km/h).
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
This indicates the distance which can still be
travelled
 
with
 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
r

elation
 
to
 
the
 
average
 
fuel
 
consumption
 
over
 
t

he
 
last
 
few
 
miles
 
(kilometres)
 
travelled.
This
 
is
 
the
 
average
 
fuel
 
consumption
 
during
 
the
 
l

ast
 
few
 
seconds.
 

 
T

his
 
is
 
the
 
average
 
fuel
 
consumption
 
since
 
the
 
l

ast
 
trip
 
computer
 
zero
 
reset.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
This indicates the distance travelled since the
last
 
trip
 
computer   zero   reset.
This
 
is
 
the   average   speed   calculated   since   the  
l

ast
 
trip
 
computer   zero   reset   (ignition   on).
Multifunction screens

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving

04
294
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
MEDIA
Level 1Level 2
List of FM stations
"Media"
Primary page
Preset