2015 Citroen C4 wheel

239
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
List of operations
F Put  the   wheel   in   place   on   the   hub.
F  S crew   in   the   bolts   by   hand   to   the   stop.
F
 
P
re-tighten   the   security   bolt   using   the
 w

heelbrace 1
 

fitted   with   the   security   socket   4.
F
 
P
re-tighten   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
Fitting a wheel
Fitting a steel or "space-
saver" spare wheel
If your vehicle is fitted with alloy wheels,
when  tightening   the   bolts   on   fitting   it   is  
n

ormal   to   notice   that   the   washers   do  
n

ot   come   into   contact   with   the   steel   or  
"

space-saver"   spare   wheel.   The   wheel  
i

s secured by the conical contact of
each
  bolt.
11
Practical information

240
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
F Tighten  the   security   bolt   using   the  w
heelbrace 1 fitted with the security
socket  4.
F
 
T
ighten   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
F
 
R
efit   the   chromed   bolt   covers   on   each   of  
t

he   bolts   (according   to   equipment).
F
 
S
tore   the   tools   in   the   box.
F
 L
ower
 
the
 
vehicle
 
fully.
F
 F
old
 
the
 
jack
 
2
 
and
 
detach
 
it.
After changing a wheel
To store the punctured wheel in the
boot
  correctly,   first   remove   the   central  
c

ove r.
When
  using   the   "space-saver"   type  
s

pare   wheel,   do   not   exceed   50   mph  
(

80 km/h).
Have
  the   tightening   of   the   bolts   and   the  
p

ressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as
possible.
Practical information

241
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.
Advice on installation
F If   you   have   to   fit   the   chains   during   a  j
ourney,   stop   the   vehicle   on   a   flat   sur face  
o

n   the   side   of   the   road.
F
 
A
pply   the   parking   brake   and   position   any  
w

heel   chocks   to   prevent   movement   of   your  
v

ehicle.
F
 
F
it   the   chains   following   the   instructions  
p

rovided   by   the   manufacturer.
F
 
M
ove   off   gently   and   drive   for   a   few  
m

oments,   without   exceeding   30 mph  
(

50 km/h).
F
 
S
top   your   vehicle   and   check   that   the   snow  
c

hains   are   correctly   tightened.
Use
 
only
 
the
 
chains
 
designed
 
to
 
be
 
fitted
 
to
 
the
 t
ype
 
of
 
wheel
 
fitted
 
to
 
your
 
vehicle:
Original
 
tyre
 
size Maximum
 
link
 
size.
195/65
 
R15 9
 
mm
205/55
 
R16
225/45
 
R17
225/40
 
R18
cannot be fitted with chains
For more information on snow chains, contact a C ITROËN   dealer   or   a   qualified   workshop.
It
  is   strongly   recommended   that   before  
y

ou   leave,   you   practise   fitting   the   snow  
c

hains   on   a   level   and   dry   sur face.
The
 
snow
 
chains
 
must
 
be
 
fitted
 
only
 
t

o
 
the
 
front
 
wheels.
 
They
 
must
 
never
 
b

e fitted to "space-saver" type spare
wheels.
Take  account   of   the   legislation   in   force  
i

n your country on the use of snow
chains
  and   the   maximum   running   speed  
a

uthorised. Avoid
  driving   with   snow   chains   on   roads  
t

hat have been cleared of snow, to
avoid
  damaging   your   vehicle's   tyres   and  
t

he   road   sur face.   If   your   vehicle   is   fitted  
w

ith   alloy   wheels,   check   that   no   part   of  
t

he   chain   or   its   fixings   is   in   contact   with  
t

he   wheel   rim.
11
Practical information

263
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Towing the vehicle
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F

r
aise the floor,
F
 
s
ecure   it   by   hooking   its   cord   on   the   hook  
o

n the rear parcel shelf
s
upport,
F
 
r
emove   the   towing   eye   from   the   holder.
Access to the tools General recommendations
In the following cases, you must always call o
n   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or  
f

ast road,
-
f

our-wheel drive vehicle,
-

w
hen it is not possible to put the
gearbox
  into   neutral,   unlock   the  
 
s

teering,   or   release   the   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the  
g

round,
-
 
w
here   there   is   no   approved   towing   arm  
a

vailable...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another
 
vehicle
 
using
 
a
 
removable
 
towing
 
ey

e.
Observe
 
the
 
legislation
 
in
 
force
 
in
 
your
 c
o unt r y.
Ensure
 
that
 
the
 
weight
 
of
 
the
 
towing
 
vehicle
 
i

s
 
higher
 
than
 
that
 
of
 
the
 
towed
 
vehicle.
The
 
driver
 
must
 
remain
 
at
 
the
 
wheel
 
of
 
the
 
t

owed
 
vehicle
 
and
 
must
 
have
 
a
 
valid
 
driving
 
l

icence.
When
 
towing
 
a
 
vehicle
 
with
 
all
 
four
 
wheels
 
o

n
 
the
 
ground,
 
always
 
use
 
an
 
approved
 
t

owing
 
arm;
 
rope
 
and
 
straps
 
are
 
prohibited.
The
 
towing
 
vehicle
 
must
 
move
 
off
 
gently.
When
 
towing
 
a
 
vehicle
 
with
 
the
 
engine
 
off,
 
t

here
 
is
 
no
 
longer
 
any
 
power
 
assistance
 
for
 
b

raking
 
or
 
steering.
11
Practical information

267
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Towbar with quickly detachable towball
Presentation
This towbar allows the towball to be fitted and
removed  quickly   and   easily   without   the   use  
o

f   tools.   Installed   behind   the   rear   bumper,   the  
t

owbar   is   invisible   after   removing   the   towball  
a

nd   folding   the   trailer   harness   socket   carrier.
1.


Carrier
2.
 P

rotective   blanking   plug.
3.
 S

ecurity   ring.
4.
 F

olding   trailer   harness   socket.
5.
 D

etachable
 t
owball.
6.
 L

ocking   /   unlocking   wheel.
7.
 S

ecurity   key   lock.
8.
 L

ocking   wheel   protector.
9.
 Ba

ll
 pro
tector.
10.
 St

orage
 b
ag.A. Locked position
The locking wheel is not in contact with the towball   (gap   of   about   5   mm).
The
  green   mark   is   visible.
The
  lock   for   the   locking   wheel   is   facing  
r

earward.
B. Unlocked position
The locking wheel is in contact with the towball.
T hen   green   mark   is   hidden.
The
  lock   for   the   locking   wheel   is   facing   for ward.
Observe
  the   legislation   in   force   in   the  
c

ountry   in   which   you   are   driving.
For
  information   on   the   maximum   trailer  
w

eight   and   the   recommended   nose  
w

eight,   refer   to   the   "Technical   data"  
s

ection.
For
  information   on   safely   towing   a  
t

railer,   refer   to   the   "Towing   a   trailer"  
s

ection.
11
Practical information

268
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Before each use
Check that the towball is correctly fitted by verifying the following points:
-  t he   towball   is   correctly   locked   in   place   (position   A),
-
 
t
he   security   key   lock   is   on   and   the   key   removed;   the   locking   wheel   can   no   longer   be  
ope

rated,
-
 
t
he   towball   must   no   longer   move   at   all   in   its   carrier;   try   to   shake   it   by   hand.
During use
Never unlock the device when a trailer or load carrier is fitted to the towball.
N ever   exceed   the   maximum   authorised   weight   for   the   vehicle   plus   trailer   (Gross   Train  
W

eight   -   GTW).
After use
For journeys made without a trailer or load carrier, the trailer harness socket must be folded away,   the   towball   removed   and    the   blanking   plug   inserted   in   the   carrier.   This   measure  
a

pplies   particularly   if   the   towball   could   hinder   visibility   of   the   number   plate   or   lighting.
Practical information

269
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Fitting the towball
Remove the protective plug from the carrier and   check   the   condition   of   the   fixing   system.  
I

f necessary, clean the carrier with a brush or
clean
  cloth.
Take
  the   towball   from   the   storage   bag.
Remove
  the   protective   cover   from   the   ball   and  
t

he   protective   cap   from   the   locking   wheel.
Stow
  the   plug,   cover   and   cap   in   the   storage  
b

ag.
Check
  that   the   towball   is   unlocked   (position   B).
 
I

f   not,   insert   the   key   in   the   lock   and   turn   the   key  
a

nti-clockwise   to   unlock   the   mechanism.Take
  the   towball   in   both   hands;   insert   the   end  o
f   the   towball   into   the   carrier   by   lifting   it,   then,  
t

o   ensure   that   it   has   correctly   locked   in   place,  
p

ull   firmly   down   on   the   ball   end   of   the   towball.
The
  locking   wheel   automatically   turns   a   quarter  
o

f   a   turn   anti-clockwise,   making   a   perceptible  
c

lick;   take   care   to   keep   your   hands   clear.Check
  that   the   towball   has   correctly   locked   in  p
lace   (position   A).
Turn
  the   key   clockwise   to   lock   the   towball   fixing  
m

echanism.
Always
  remove   the   key   and   keep   it   in   a   safe  
p

lace.If
  the   key   cannot   be   turned   or   removed,  
t

his   means   that   the   towball   is   not   fitted  
c

orrectly;   start   the   procedure   again.
If
  one   of   the   locking   conditions   is   not  
m

et,   start   the   procedure   again.
In
  all   cases,   if   the   marking   remains  
r

ed, do not use the towbar and contact
a
  CITROËN   dealer   or   a   qualified  
w

orkshop.
11
Practical information

271
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Maintenance
Correct operation is only possible if the towball
and  its   carrier   remain   clean.
Before
  cleaning   the   vehicle   with   a   high  
p

ressure   jet   wash,   the   towbar   harness   socket  
c

arrier   must   be   folded   away,   the   towball  
r

emoved   and   the   blanking   plug   inserted   in   the  
c

a r r i e r.
For
  any   work   on   the   towbar,   got   to   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Refit the protective cover for the ball and the
protective
 
cover
 
for
 
the
 
locking
 
wheel.
Stow
 
the
 
towball
 
in
 
its
 
bag.
Refit
 
the
 
protective
 
blanking
 
plug
 
to
 
the
 
carrier.
Grasp
 
the
 
towball
 
firmly
 
with
 
one
 
hand;
 
with
 
t

he
 
other
 
hand,
 
press
 
and
 
turn
 
the
 
locking
 
w

heel clockwise
 
as
 
far
 
as
 
it
 
will
 
go.
Extract
 
the
 
towball
 
downward.
Be
 
ready
 
for
 
the
 
weight
 
of
 
the
 
towball
 
(

around
 
3.5
 
kg).
 
Risk
 
of
 
injury!
11
Practical information