2015 Citroen C4 tow

160
C4-2_en_Chap08_securite_ed01-2015
C4-2_en_Chap08_securite_ed01-2015
Lateral airbags
Deployment
A lateral airbag is deployed unilaterally in the event   of   a   serious   side   impact   applied   to   all   or p

art   of   the   side   impact   zone B, perpendicular
to
  the   longitudinal   centreline   of   the   vehicle   on   a
 h

orizontal   plane   and   directed   from   the   outside
 t

owards   the   inside   of   the   vehicle.
The
  lateral   airbag   inflates   between   the   hip   and  
s

houlder of the front occupant of the vehicle
and
  the   corresponding   door   trim   panel.
Impact detection zones
A. Front  impact   zone.
B. S ide   impact   zone.
Curtain airbags
System which contributes towards improving the   protection   of   the   driver   and   passengers  
(

with   the   exception   of   the   rear   centre  
p

assenger)   in   the   event   of   a   serious   side  
i

mpact   in   order   to   limit   the   risk   of   injury   to   the  
s

ide   of   the   head.
Each
  curtain   airbag   is   built   into   the   pillars   and  
t

he   upper   passenger   compartment   area.
Deployment
The curtain airbag is deployed at the same time   as   the   corresponding   lateral   airbag   in   the  
e

vent   of   a   serious   side   impact   applied   to   all   or  
p

art   of   the   side   impact   zone   B, perpendicular
to
  the   longitudinal   centreline   of   the   vehicle   on   a  
h

orizontal   plane   and   directed   from   the   outside  
t

owards   the   inside   of   the   vehicle.
The
  curtain   airbag   inflates   between   the   front   or  
r

ear   occupant   of   the   vehicle   and   the   windows.
System
 
which
 
protects
 
the
 
driver
 
and
 
front
 p
assenger
 
in
 
the
 
event
 
of
 
a
 
serious
 
side
 
impact
 i
n
 
order
 
to
 
limit
 
the
 
risk
 
of
 
injury
 
to
 
the
 
chest,
 
b

etween
 
the
 
hip
 
and
 
the
 
shoulder.
Each
 
lateral
 
airbag
 
is
 
fitted
 
in
 
the
 
seat
 
backrest
 
f

rame,
 
door
 
side.
Safety

170
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Electric parking brake
The electric parking brake has two operating modes:
-

A
utomatic Application/Release
 A

pplication   is   automatic   when   the   engine  
s

tops,   release   is   automatic   on   use   of   the  
a

ccelerator   (activated   by   default),
-

M
anual Application/Release
 T

he   parking   brake   can   be   applied   /  
r

eleased   manually   by   pulling   control  
l

ever

A.
If
  this   warning   lamp   comes   on   in  
t

he   instrument   panel,   the   automatic  
m

ode   is   deactivated.Programming the mode
Depending on  t he  c ountry  o f  s ale  o f  t he  v ehicle,  t
he   automatic   application   when   the   engine   is  
s

witched   off   and   the   automatic   release   when  
y

ou   press   the   accelerator   can   be   deactivated.
Activation
  /   deactivation   is   done  
u

sing   the   vehicle   configuration  
m

enu;   refer   to   the   section   covering  
t

he   configuration   of   your   vehicle's  
s

ystems.
The
  parking   brake   is   then   applied   and   released  
m

anually.   When   the   driver's   door   is   opened,  
t

here   is   an   audible   signal   and   a   message   is  
d

isplayed   if   the   brake   is   not   applied. It
  is   recommended   that   you   do   not  a
pply   the   parking   brake   in   very   cold  c
onditions   (ice)   and   during   towing  
(

breakdown,   caravan...).   Deactivate   the  
a

utomatic   functions   and   release   the  
par

king
 b
rake
 m
anually.
Do
  not   place   any   object   (packet   of  
c

igarettes,   telephone...)   between   the  
g

ear   lever   and   the   electric   parking  
b

rake   control   lever.
driving

171
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
With the vehicle stationary, to apply the parking brake   whether   the   engine   is   running   or   off,   pull
control lever A .
The
  application   of   the   parking   brake   is  
c

onfirmed   by:
-
 i

llumination
 o
f
 t
he
 b
raking
 w
arning
 l

amp   and   of   the   P
 
warning   lamp   in
 t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
When
  the   driver’s   door   is   opened   with   the  
e

ngine   running,   a   message   is   displayed  
a

ccompanied   by   an   audible   signal   if   the   parking  
b

rake   has   not   been   applied,   except   in   the   case  
o

f   an   automatic   gearbox   with   the   gear   lever   in  
p

osition P .
Before
  leaving   the   vehicle,   ensure
 t

hat   parking   brake   warning   lamp   in   the
 i

nstrument   panel   is   on   fixed,   not   flashing.
Manual applicationManual release
The full application of the parking brake is c
onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
If you pull control lever A  without   pressing t
he   brake   pedal,   the   parking   brake   will n

ot   be   released   and   a   warning   lamp   will
 c

ome   on   in   the   instrument   panel.
With the ignition on or the engine running, to release   the   parking   brake,   press on the brake
pedal or the accelerator, pull then release
control A . If
  necessary,   you   can   make   a   maximum
application
 
of   the   parking   brake.   This   is  
o

btained
 by m
eans
 o
f
 a long
pull
on the control
lever A ,   until   you   see   the   message   "Parking  
b

rake   on   maximum"   and   a   beep   is   heard.
In   the   case   of   towing,   a   loaded   vehicle   or  
p

arking   on   a   gradient,   make   a   maximum  
a

pplication   of   the   parking   brake   then   turn   the  
f

ront   wheels   towards   the   pavement   and   engage  
a

  gear   when   you   park.
After
  a   maximum   application,   the   release   time  
w

ill   be   longer.
Maximum application
Maximum application is essential:
- i n   the   case   of   a   vehicle   towing   a   caravan  
o

r   a   trailer,   if   the   automatic   functions   are  
a

ctivated   but   you   are   applying   the   parking  
b

rake
 m
anually,
-
 
w
hen   the   gradient   you   are   parked   on   may  
v

ary   (e.g.   on   a   ferry,   on   a   lorry,   during  
tow

ing).
9
Driving

172
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automatic release
Full release of the parking brake is 
c onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
Automatic application,
engine off
- illumination of t he b raking w arning l
amp   and   of   the   P  warning   lamp   in t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
The
 
application   of   the   parking   brake   is  
c

onfirmed   by:
With
 
the
 
vehicle   stationary,   the   parking   brake  
i

s automatically applied when the engine is
switched off .
Before   leaving   the   vehicle,   ensure  
t

hat   parking   brake   warning   lamp   in  
t

he
  instrument   panel   is   on   fixed   (not  
f

lashing).
ne

ver leave a child alone inside the
vehicle
  with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.
When stationary, with the engine running, do not press the accelerator pedal unnecessarily,
as
  you   may   release   the   parking   brake.
In the case of towing, a loaded vehicle or   parking   on   a   gradient,   turn   the   front  
w

heels   towards   the   pavement   and  
e

ngage   a   gear   when   you   park.The
  electric   parking   brake   releases
automatically and progressively when you
press
  the   accelerator:
F

M
anual gearbox: press down fully on the
clutch
  pedal,   engage   first   gear   or   reverse,  
p

ress   on   the   accelerator   pedal   and   move  
o

f f.
F

E
lectronic gearbox: select position A, M
or R
  then   press   on   the   accelerator   pedal.
F

A
utomatic gearbox: select position D, M
or R
  then   press   the   accelerator   pedal.
Driving

186
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Manual operation
D disappears and the gears engaged   appear   in   succession   in  
t

he   instrument   panel.
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
If the lever is not in position P , when the
driver's  d oor  i s  o pened  o r  a pproximately  
4

5   seconds   after   the   ignition   is   switched  
o

ff,   there   is   an   audible   signal   and   a  
m

essage
 ap
pears.
F

R
eturn the lever to position P ;
 
t

he   audible   signal   stops   and   the  
m

essage
 d
isappears.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 p
ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 t
emporarily
 
in
 
automatic
 
mode.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or
 
too
 
high,
 
the
 
g

ear
 
selected
 
flashes
 
for
 
a
 
few
 
seconds,
 
then
 
t

he
 
actual
 
gear
 
engaged
 
is
 
displayed.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D
(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any
 
time.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
moving
 
v

ery
 
slowly,
 
the
 
gearbox
 
selects
 
gear
 
M1
automatically.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not
 
o

perate
 
in
 
manual
 
mode. Before
  switching   off   the   engine,   you   can  
e

ngage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
 
both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
t

o
 
automatic   mode.
Driving

198
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
F To  deactivate   the   system,   press   this   button  a
gain;   the   warning   lamp   goes   off.
The
  state   of   the   system   remains   in   memory   on  
s

witching   off   the   ignition.
Operating fault
The system is automatically deactivated when   towing   with   a   towbar   approved   by  
CIT

ROËN. The
  system   may   suffer   temporary  
i

nterference in certain weather
conditions(rain,
 h
ail...).
In   particular,   driving   on   a   wet   sur face  
o

r   moving   from   a   dry   area   to   a   wet   area  
c

an   cause   false   alerts   (for   example,   the  
p

resence   of   a   fog   of   water   droplets   in  
t

he   blind   spot   angle   is   interpreted   as   a  
v

ehicle).
In bad or wintry weather, ensure that
the   sensors   are   not   covered   by   mud,   ice  
o

r   snow.
Take   care   not   to   cover   the   warning   zone  
i

n   the   door   mirrors   or   the   detection  
z

ones   on   the   front   and   rear   bumpers  
w

ith   adhesive   labels   or   other   objects;  
t

hey   may   hamper   the   correct   operation  o
f   the   system.
In   the   event   of   a   fault,   the   warning   lamp   in   the  
b

utton   flashes   then   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

204
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Programming
F Turn dial 1 to the "CRUISE" position:  t
he   cruise   control   mode   is   selected   but  
i

s   not   switched   on   (Pause).
F
 
S
et   the   programmed   speed   by  
a

ccelerating   to   the   required   speed,  
t

hen press button 2 or 3   (e.g.:   70 mph  
(

110   km/h));   the   cruise   control   system  
i

s   activated   (ON).
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results   in   flashing   of   this   speed   in   the   screen.
Return
  to   the   programmed   speed,   by   means   of   intentional   or  
u

nintentional   deceleration   of   the   vehicle,   automatically   cancels   the  
f

lashing   of   the   speed.
Exiting cruise control mode
F Turn dial 1 to the "0"  position:   the   cruise   control   mode   is  d
eselected.   It   disappears   from   the   screen.
F
 
S
top   the   cruise   control   system   by   pressing   button   4
:   this   is  
c

onfirmed   in   the   screen   (Pause).
Operating fault
You can then change the programmed speed using buttons 2 and 3
:
-  b y   +   or   -   1   mph   (km/h)   =   short   press,
-
 
i
n   steps   of   +   or   -   5   mph   (km/h)   =   maintained   press.
If
  storing   speeds   is   available   and   activated   on   your   vehicle,   the  
p

rogrammed   speed   will   stop   at   the   closest   stored   speed;   refer   to   the  
c

orresponding
 s
ection.
F
 
S
witch   on   the   cruise   control   again   with   another   press   on   button   4. When the cruise control is switched on,
be
  careful   if   you   maintain   the   pressure  
o

n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
do n

ot use the cruise control on
slippery
  roads   or   in   heavy   traffic.
on a s

teep descent, the cruise control
will not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   positioned  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
In
  the   event   of   a   cruise   control   malfunction,  
t

he   speed   is   cleared   resulting   in   flashing   of   the  
das

hes.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

206
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
In addition to the rear parking sensors, the front parking   sensors   are   triggered   when   an   obstacle i

s detected in front and the speed of the vehicle is
still
  below   6   mph   (10   km/h).
The
  front   parking   sensors   are   interrupted   if   the
 v

ehicle   stops   for   more   than   three   seconds   in
 f

or ward   gear,   if   no   further   obstacles   are   detected
 o

r   when   the   speed   of   the   vehicle   exceeds   6   mph
 (

10   km/h).
Front parking sensors
Deactivation/Activation of the
front and rear parking sensors
The function is deactivated by pressing this button.   The   indicator   lamp   in   the   button  
comes
  on.
Pressing
  this   button   again   reactivates   the  
f

unction.   The   indicator   lamp   in   the   button  
goes
  off.
Operating fault
In the event of a malfunction of the   system,   when   reverse   gear  
i

s   engaged   this   warning   lamp   is  
d

isplayed   in   the   instrument   panel  
a

nd/or   a   message   appears   in   the  
s

creen,   accompanied   by   an   audible  
s

ignal   (short   beep).
Contact a CITR
oËn

dealer or a
qualified
 w

orkshop.
The
 
sound
 
emitted
 
by
 
the
 
speaker
 
(front
 
or
 
r

ear)
 
indicates
 
whether
 
the
 
obstacle
 
is
 
in
 
front
 
o

r
 
behind. The function will be deactivated
automatically
 
if
 
a
 
trailer
 
is
 
being
 
towed
 
o

r
 
a
 
bicycle
 
carrier
 
is
 
fitted
 
(vehicle
 
f

itted with a towbar or bicycle carrier
recommended
 
by
 
CITROËN). In bad weather or in winter, ensure
that the sensors are not covered with
mud,
  ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,
  pneumatic   drill,   etc.)   may   trigger  
t

he
 
audible   signals   of   the   parking  
s

ensor   system.
driving