2015 Citroen C4 service

24
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator lampis on Cause Action/Observations
+
+ SCR emissions
control system

(BlueHDi Diesel) fixed,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust   emissions  
r

eturn   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage   indicating   the  
r

emaining
 d
riving
 r
ange.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   without delay, to avoid a breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated  
w

ith the SERVICE and
engine
  diagnostic   warning  
l

amps,   accompanied   by  
a

n   audible   signal   and   a  
m

essage.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call on a
CITROËN
  dealer   or   a   qualified   workshop.
Monitoring

30
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Service indicator
System that informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vice
 s
chedule.
The point at which the service is due is
calculated
  from   the   last   service   indicator   zero  
r

eset,   according   to   the   distance   covered   and  
t

he   time   elapsed   since   the   last   service.
For
b
l
ueH
di
d
i
esel versions, the level of
deterioration
  of   the   engine   oil   may   also   be  
t

aken   into   account,   depending   on   the   country  
o

f   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service information appears   in   the   instrument   panel   central   screen.
Between 600 miles (1 000 km)
and 1800 miles (3 000 km) remain
before the next service is due
For a few seconds after the ignition is switched on,   the   spanner   symbolising   the   service o

perations   comes   on.   The   distance   recorder
 d

isplay   line   or   a   specific   message   in   the
 i

nstrument   panel   central   screen   indicates   the
 d

istance
 r
emaining
 b
efore
 t
he
 n
ext
 ser
vice
 i
s
 d
ue.
For example:
 

1   700   miles   (2   800   km)   remain
 b

efore   the   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched
 o

n,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched  
o

n,   the   screen   indicates:
A
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 
t

he spanner goes off ;
 
the
 
distance
 
recorder
 
r

esumes
 
its
 
normal
 
operation.
 
The
 
screen
 
then
 
i

ndicates
 
the
 
total
 
and
 
trip
 
distances. A
  few   seconds   after   the   ignition   is   switched  
o

n,   the   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
Monitoring

31
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Service overdue
For a few seconds after the ignition is switched on, the spanner flashes to indicate that the service
must
  be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles
 
(

300   km).
For
  a   few   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
A
  few   seconds   after   the   ignition   is   switched  
o

n,   the   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on .
For
b
l
ueH
di
d
i
esel versions, this alert is also
accompanied
  by   the   fixed   illumination   of   the  
S

ervice   warning   lamp   when   the   ignition   is  
s

witched   on. The
  spanner   comes   on   if   you   have  
e

xceeded   the   specified   time   interval  
s

ince the last service, as indicated in
the
 ma

nufacturer's
 ser
vice
 s
chedule.
For
b
l
ueH
di
d
i
esel versions, the
spanner
  may   also   come   on   before   the  
n

ormal   service   point,   according   to   the  
l

evel   of   deterioration   of   the   engine   oil,  
w

hich
 d
epends
 o
n
 t
he
 d
riving
 c
onditions
 i

n   which   the   vehicle   is   used.
1
Monitoring

32
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If you have carried out the service on your
vehicle
 y

ourself:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the ".../000" trip distance
recorder zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the screen indicates "=/0" and the
spanner
  disappears,   release   the   button.Following
  this   operation,   if   you   wish   to  d
isconnect   the   battery,   lock   the   vehicle  a
nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   registered.
Monitoring

44
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Touch screen tablet
General operation
Principles
Press the virtual buttons in the touch screen
tablet.
Each  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
For reasons of safety, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some
 
functions
 
are
 
not
 
accessible
 
w

hen
 d

riving.
This
 
system
 
gives
 
access
 
to:
-
 
m

enus
 
for
 
adjusting
 
settings
 
for
 
vehicle
 f
unctions
 
and
 
systems,
-
 a
udio
 
and
 
display
 
settings
 
menus,
-
 
a

udio
 
system
 
and
 
telephone
 
controls
 
and
 
t

he
 
display
 
of
 
associated
 
information.
-
 
t

he
 
display
 
of
 
alert
 
messages,
-
 
t

he
 
display
 
of
 
the
 
ambient
 
temperature
 

(a
 
blue
 
snowflake
 
appears
 
if
 
there
 
is
 
a
 
risk
 
o

f
 
ice),
-
 
t

he
 
display
 
of
 
the
 
trip
 
computer.
And,
 
depending
 
on
 
equipment,
 
it
 
also
 
allows:
-
 
t

he
 
display
 
of
 
visual
 
parking
 
sensors
 
i

nformation,
-
 
a

ccess
 
to
 
the
 
controls
 
for
 
the
 
navigation
 
s

ystem
 
and
 
Internet
 
services,
 
and
 
the
 
d

isplay
 
of
 
associated
 
information.
Recommendations
It is necessary to press firmly, particularly for " flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
do n

ot touch the touch screen tablet with wet
hands.
Uses
  a   soft   clean   cloth   to   clean   the   touch  
s

creen
 t
ablet. Use
  this   button   to   go   to   the  
s

econdary
 pag
e.
After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
Use
  this   button   to   return   to   the  
p

rimary
 pag
e.
Use
  this   button   for   access   to  
a

dditional   information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use
  this   button   to   quit.
Multifunction screens

45
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Menus
Press one of the buttons on the control panel
for  direct   access   to   a   particular   menu.
Driving
Gives
  access   to   the   trip   computer   and,
 d

epending   on   version,   allows   settings
 t

o   be   adjusted   for   certain   functions.
See
  the   corresponding   section.
Navigation .
Depending
  on   trim   level   or   country   of
 s

ale,   navigation   can   be   not   available,
 a

n   option   or   standard.
See
 t

he
 "
Audio
 a
nd
 t
elematics"
 se
ction.
Radio Media .
See
  the   "Audio   and   telematics"  
s

ection.
Telephone .
See
  the   "Audio   and   telematics"  
s

ection. Internet.
The connected services are accessible
using
  a   connection   key   and   by
 s

ubscription.
See
 t

he
 "
Audio
 a
nd
 t
elematics"
 se
ction.
Settings .
Allows
  configuration   of   the   display  
a

nd   the   system.1.
 V

olume   /   mute.
See
  the   "Audio   and   telematics"   section.
2
Multifunction screens

64
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from  
w

orking   and   the   remote   control   would   have   to   be   reinitialised.
The
  remote   control   does   not   operate   when   the   key   is   in   the   ignition,   even   when   the   ignition   is   switched   off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s   a   safety   precaution   (with   children   on   board),   remove   the   key   from   the   ignition   or   take   the   electronic   key   when   you   leave   the   vehicle,   even   for  
a

  short   time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic   fields,   ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't   forget   to   turn   the   steering   to   engage   the   steering   lock.
Lost keys, remote control, electronic key
Visit a CITROËN dealer with the vehicle's V5 registration document and your personal identification documents.
T he   CITROËN   dealer   will   be   able   to   retrieve   the   key   code   and   the   transponder   code   required   to   order   a   replacement.
Do
  not   throw   the   remote   control   batteries   away,   they   contain   metals   which   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection   point.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
Access

67
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
* According to country of sale.
Alarm*
- exterior perimeter
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot,   the   bonnet...
- interior volumetric
The system checks for any variation in the volume   in   the   passenger   compartment.
The
  alarm   is   triggered   if   anyone   breaks   a  
w

indow,   enters   the   passenger   compartment   or  
m

oves   inside   the   vehicle.
- tilt
The system checks for any change in the attitude   of   the   vehicle.
The
  alarm   is   triggered   if   the   vehicle   is   lifted,  
m

oved   or   knocked.
Self-protection function
The system checks for the putting out of service   of   its   components.
The
  alarm   is   triggered   if   the   battery,   the   central  
c

ontrol   or   the   siren   wiring   are   put   out   of   service  
o

r   damaged. For
  all   work   on   the   alarm   system,  
c

ontact a CITR
oËn
dealer or a
qualified
 w
orkshop.
System
 
which
 
protects
 
and
 
provides
 
a
 
deterrent
 
against   theft   and   break-ins.   It   provides   the  
f

ollowing
 
types
 
of
 
monitoring:
3
Access