2015 Citroen C4 bluetooth

04
309
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's  speakers.
Connect
  the   telephone:   see   the   "Telephone" section, then
"Bluetooth".
Choose the " Audio" or "All"
  profile.
If
  play   does   not   start   automatically,   it   may   be   necessary   to   start   the  
audio

  playback   from   the   telephone.
Control
  is   from   the   peripheral   device   or   by   using   the   audio   system  
buttons.
Once

  connected   in   streaming   mode,   the   telephone   is   considered   to  
be

  a   media   source.
It
  is   recommended   that   you   activate   "Repeat" on the b luetooth
peripheral.
Connecting APPLE® players
Connect the apple® player to one of the USB ports
 
using
 
a
 
suitable   cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The
 
classifications
 
available   are   those   of   the   portable   device  
connected

 
(artists
 
/
  albums   /   genres   /   playlists   /   audiobooks   /  
podcasts).
The

 
default
 
classification   used   is   by   artist.  
T
o   modify   the  
classification

 
used,
  return   to   the   first   level   of   the   menu   then   select  
the

 
desired
 
classification   (playlists   for   example)   and   confirm   to   go  
down

 
through
 
the
 
menu   to   the   desired   track.
Copies
 
of
 
photos
 
and   album   artwork   are   not   compatible   with   the  
audio

 
system.
 
These
  appear   only   with   a   USB   memory   stick.
MUSIC
The version of software in the audio system may not be compatible with  the   generation   of   your  Apple® player.

07
340
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
CONNECTED SERVICES
Level 1Level 2
"Connected services"
Primary page
Driving
  assistance  
applications,

  see   following  
page

  on   "CITROËN  
MUL

TICITY
 
CONNECT"*. Identification
DUN connection settings
Transfer rate
It
  may   be   that   certain   new  
generation

  smartphones  
are

  not   compatible   with   this  
standard.
Secondary page


Internet   navigation   via  
Bluetooth

  telephone   Dial-Up  
Networking

  (DUN).
*
 
Depending   on   country.

08
344
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
TELEPHONE
Level 1Level 2Level 3
Bluetooth (equipment)
Telephone OptionsDevices detected
Telephone connection
"Telephone"
Secondary page

345
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
Telephone
connection
Secondary page Bluetooth
Connection Search
Start the search for another peripheral device to connect.
DisconnectStop the bluetooth connection to the selected peripheral
device.
UpdateImport the contacts from the selected telephone to store them   in   the   audio   system.
DeleteDelete the selected telephone.
ConfirmSave the settings.
Telephone
connection
Secondary page Search for devices Devices detected
Telephone
Start the search for peripheral devices.Audio streaming
Internet
T
elephone
connection
Secondary page Telephone Options Put on hold
Cut the microphone temporarily so that the contact cannot hear
  your   conversation   with   a   passenger.
UpdateImport the contacts from the selected telephone to save then in  the   audio   system.
RingtonesChoose the telephone ringtone and volume.
Memory info.Contact records used and free, percentage of storage space used  by   internal   contacts   and   Bluetooth   contacts.
ConfirmSave the settings.

08
346
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   system   must  
be carried out with the vehicle stationary

.
Select "Bluetooth Connection ".
Press on Telephone
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page. Select Search.
The
  list   of   telephones   detected   is   displayed.
Activate
 
the
 
telephone's
 
Bluetooth
 
function
 
and

 
ensure
 
that
 
it
 
is
 
"visible
 
to
 
all"
 
(telephone
 
configuration). Procedure (short) from the telephone
In

 
the
 
Bluetooth
 
menu
 
of
 
your
 
device,
 
select
 
the
 
system

 
name
 
in
 
the
 
list
 
of
 
devices
 
detected.
Enter
 
a
 
code
 
of
 
at
 
least
 
4
 
figures
 
in
 
the
 
device
 
and

 
confirm.
Enter
 
this
 
same
 
code
 
in
 
the
 
system,
 
select
 
"OK"
and
 
confirm.
Procedure from the system
The
  system   offers   to   connect   the   telephone:
-

in "
Telephone"   (hands-free   kit,   telephone   only),
-

in "
Audio streaming"   (streaming:   wireless   playing   of   audio   files  
from

  the   telephone),
-

in "
Internet"   (internet   browsing,   only   if   your   telephone   is  
compatible

  with   the   "DUN"   Dial-Up   Networking   Bluetooth  
standard).
Select

  one   or   more   profiles   and   Confirm.
Select
  the   name   of   the   desired   peripheral   from  
the list and

Confirm.
BLUETOOTH
If the telephone is not detected, it is recommended that you switch the  Bluetooth   function   on   your   telephone   off   and   then   on   again.
Enter
  a   code   of   at   least   4   figures   for   the  
connection then "Confirm

".
Enter
  this   same   code   in   the   telephone   then  
accept

  the   connection.

08
347
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Depending on your telephone, you may be asked to accept automatic  connection   every   time   the   ignition   is   switched   on.
Depending
  on   the   type   of   telephone,   the   system  
will

  ask   you   to   accept   or   not   the   transfer   of   your  
contacts. The
  services   available   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

  and   with   your   network   provider   for   details   of   the   services  
available

  to   you.
On   return   to   the   vehicle,   the   last   telephone   connected   automatically  
reconnects,

  within   around   30   seconds   after   switching   on   the   ignition  
(Bluetooth

  activated).
To
  modify   the   automatic   connection   mode,   select   the   telephone   in  
the

  list   then   select   the   desired   profile.
The
  telephone   is   added   to   the   list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth" to display the list of paired
peripherals.
Select
  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth" to display the list of paired
peripheral
  devices.
Select
  the   peripheral   in   the   list.
Select:
-
"Search" or "Disconnect" to connect or
disconnect the
b luetooth connection with
the
  peripheral   selected.
-
"Delete"   to   remove   the   pairing.
BLUETOOTH
348This function allows the connection or disconnection of a peripheral
device
  as   well   as   the   deletion   of   a   pairing.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
353
q

UESTION
ANSWER SOLUTION
Certain
 
traffic
 
jams
 
along

 
the
 
route
 
are
 
not
 
indicated

 
in
 
real
 
time.
On
 
starting,
 
it
 
is
 
several
 
minutes
 
before
 
the
 
system
 
begins
 
to
 
receive
 
the
 
traffic

 
information.
Wait
 
until
 
the
 
traffic
 
information
 
is
 
being
 
received  
correctly

 
(display
 
of
 
the
 
traffic
 
information
 
icons
 
on  
the

 
map).
The
 
filters
 
are
 
too
 
restrictive.
Modify
 
the
 
"Geographic
 
filter"
 
settings.
In
 
certain
 
countries,
 
only
 
major
 
routes
 
(motorways...)
 
are
 
listed
 
for
 
the
 
traffic

 
information.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is
 
dependent

 
on
 
the
 
traffic
 
information
 
available.
The altitude is not
displayed. On
 
starting,
 
the
 
initialisation
 
of
 
the
 
GPS
 
may
 
take
 
up
 
to
 
3
 
minutes
 
to
 
receive

 
more
 
than
 
4
 
satellites
 
correctly.
Wait
 
until
 
the
 
system
 
has
 
started
 
up
 
completely.
 
Check

 
that
 
there
 
is
 
a
 
GPS
 
coverage
 
of
 
at
 
least
 
4 satellites

 
(long
 
press
 
on
 
the
 
SETUP
 

button,
 
then  
select

 
"GPS
 
coverage").
Depending
 
on
 
the
 
geographical
 
environment
 
(tunnel...)
 
or
 
the
 
weather,
 
the

 
conditions
 
of
 
reception
 
of
 
the
 
GPS
 
signal
 
may
 
vary.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is

 
dependent
 
on
 
the
 
GPS
 
signal
 
reception
 
conditions.
T

elephone, Bluetooth
I
 
cannot
 
connect
 
my
 
Bluetooth

 
telephone.
The
 
telephone's
 
Bluetooth
 
function
 
may
 
be
 
switched
 
off
 
or
 
the
 
telephone
 
may

 
not
 
be
 
visible.
-
 
Check

 
that
 
your
 
telephone's
 
Bluetooth
 
function

 
is
 
switched
 
on.
-
 
Check

 
in
 
the
 
telephone
 
settings
 
that
 
it
 
is
 
"visible

 
to
 
all".
The
 
Bluetooth
 
telephone
 
is
 
not
 
compatible
 
with
 
the
 
system.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone  
at

 
www.citroen.co.uk
 
(services).
The
 
volume
 
of
 
the
 
telephone connected
in

 
Bluetooth
 
mode
 
is
 
inaudible.
The

 
volume
 
depends
 
both
 
on
 
the
 
system
 
and
 
on
 
the
 
telephone.
Increase
 
the
 
volume
 
of
 
the
 
audio
 
system,
 
to
 
maximum

 
if
 
required,
 
and
 
increase
 
the
 
volume
 
of  
the

 
telephone
 
if
 
necessary.
The
 
ambient
 
noise
 
level
 
has
 
an
 
influence
 
on
 
the
 
quality
 
of
 
telephone
 
communication.
Reduce

 
the
 
ambient
 
noise
 
level
 
(close
 
the
 
windows,
 reduce

 
the
 
booster
 
fan
 
speed,
 
slow
 
down, ...).