2015 AUDI R8 SPYDER door lock

.... N
l'­
N "1: .... I.O
"' N
"' ....
lid as well as the vehicle doors closed when
not in use.
(D Note
Make sure no objects are p rotruding above
the edge of the luggage compartment. Other­
w ise, the front lid could be damaged .
@ Tips
If the front lid is open or not properly locked
when the ignit ion is t urned on, the door and
front lid warning appears in the instrument duster display.
Emergency release for front lid
If the front lid cannot be opened , on emergency
release is provided.
Fi g. 29 Section: Emergency release
.. Reach under the closed glove compartment.
T he re is a red plast ic co rd u nder the glove com­
partment .
.. Pull the red plast ic co rd towa rds you.
Open ing and clo sing
Anti-theft alarm system
The anti-theft alarm triggers an alarm if anyone
attempts to break into the vehicle.
Fig. 30 Diode position in the i nst ru m ent pa nel
T he anti-theft alarm system tr iggers an audib le
alarm a nd turns on the emergency flasher if an
u nau thori zed interfe ren ce wi th t he veh icle is
sensed by the system.
0) 0 u, 0 ,:. .. m
How i s the anti -theft alarm system switched
on?
T he anti-theft alarm system is switched on when
yo u lock the driver's door manually using the
fold-out key, or when you use the remote cont ro l.
The system is activated approximately 30 sec ­
onds after the vehicle is locked. The indicator
li ght¢
fig. 30 starts flashing rap idly for 2 sec­
onds and then blinks slowly.
How i s the anti-theft alarm sy stem swit ched
off?
The anti-theft alarm system is switched off only
whe n you unlock your vehicle. If you do not open
a door within 30 seconds after you have un locked
with the remo te control, the veh icle wi ll lock it­
self again automat ica lly.
When will the anti theft alarm system be
triggered?
When the vehicle is locked, the a la rm system
monito rs and prote cts the fo llowing pa rts of the
vehicle:
- eng ine compartment
- luggage compartment
- doors
- ign ition
33

Opening and closing
W hen the system is activated, the ala rm w ill be
triggered if one of the doors, the engine com­
partment lid or the front lid are opened.
The ant i-theft a larm system will a lso go off when
the battery is disconnected.
You ca n also tr igger the alarm by p ressing the
PAN IC b utton o n your remote-c on trol key . Thi s
will alert o ther people in case of emergency.
Press the
PANIC button again to t urn off the
alarm.
How is the anti-theft alarm switched off
when trigg ered?
The ala rm sys tem is switc hed off when you un ­
lock the vehicle using the remote-contro l key or
when the ignit ion is switched on. The a larm w ill
a lso switch itself off when it comes to the end of
its cycle .
Emergency flasher
The emergency f las her will blink briefly w hen the
doors, engine compartment lid and front lid are
properly closed.
If the emergency flashers do no t blink , check the
doors, engine compartment lid and front lid to
make sure they are properly closed . If you close a
door, the engine compartment lid or the front lid
with the an ti-theft alarm switc hed on, the emer­
gency flashers will bli nk only after you have
closed the door or lid .
(D Tips
For the anti-theft alarm system to function
properly, make sure all vehicle do ors and w in­
dows are closed befo re leavi ng the veh icle .
34
Power windows
Controls
The driver can operate all windows .
Fig. 3 1 Driver 's doo r: powe r w in dow swi tches
The power window swi tc h es h ave a two-positi on
fun ction :
Opening the windows
.,. Press the switch and hold it down unt il the
w indow has reached the desired posi tion.
.,. Press the switch
briefly to open the window a u­
t om atic ally .
.,. By brief ly pressing/p ulling the sw itch again, the
downward travel of the window can be stopped
in any positio n
¢ .&,.
Closing the windows
.,. Pull the sw itch and hold it until t he w indow h as
re ached the desire d position .
.,. Pull the sw itch
briefly to close the window au ­
tomatically .
.,. By briefly pressing/p ulli ng the switch again, the
upward travel of the window can be stopped in
any position
¢ ,& .
A WARNING
-Do not leave ch ild ren unattended in the ve­
hicle, especially with access to vehicle keys .
Unsupervised use of the keys can re sult in
s tarti ng of the engine and use of vehi cle sy s­
t ems su ch as power wi ndow s, e tc. whic h
co uld res ult in se rious i njury.
- Remembe r -you ca n still ope n or close the
power windows fo r abo ut ten minutes after

.... N
l'­
N "1: .... I.O
"' N
"' ....
the ignition is switched off. Only when ei­
ther of the front doors are opened are the power windows switched off.
- Be careful when closing the windows. Check
to see that no one is in the way, or serious injury could result!
- Always remove the ignition key whenever
you leave your vehicle .
- If you lock your vehicle from the outside, no
one, especially children, should remain in
the vehicle.
- Do not stick anything on the windows or the windshield that may interfere with the driv­
er's field of vision.
(D Tips
- When the doors are opened, the windows
are automatically lowered 0.4 in (10 mm).
Reactivating the system after battery
disconnection
If the vehicle bat tery is disconnected and then
reconnected, the automati c closing and opening
function will not work until it is reactivated .
... Pull and hold the power window switch until
the window is completely closed .
.,. Release the switch and pull it again for one sec­
ond .
Garage door opener
(Homelink)
Description
Fig. 32 Garage door opene r: exa mples of using wit h diffe r­
ent sy stems
Opening and closing
You can activate various systems such as garage
doors, security systems and home lighting from
inside your vehicle using the garage door opener
(Homelink) . There are three buttons for this in
the vehicle headliner that can be in used in place of up to three hand -held transmitters .
To operate systems using the garage door open­ er, the th ree buttons in the headliner must be
programmed first.
A WARNING
=
Make sure no people or objects are in the im-
mediate vicinity of the equipment when using
or programming the garage door opener. Peo­
ple can be injured and objects can be dam­
aged if they are caught in the equipment.
@ Tips
-For security reasons, we recommend that
you clear the programmed buttons before
selling the vehicle.
- For additional information about Homelink ,
visit www .homelink.com.
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
Qpage 218.
35

Clear vision
Clear vision Lights
Switching the headlights on/off
F ig. 55 Inst rument pane l: ligh t switch (automatic head ­
and taill ig ht control)
Switching on the side marker lights
"'T urn the light switch to :oo:.
Switching on the headlights and high beam
"'Turn the light switch to io.
"'Push the high beam lever forward towards the
instrument panel~
page 47.
Switching off the lights
"'Turn the light switch to 0.
Switching on automatic head- and taillight
control
"'Turn the light switch to AUTO ~ fig. 55.
The headlights and taillights will come on auto­
matica lly when the ignition is switched on and
the light switch is in the position AUTO (on ly in
nighttime conditions). When switching
off the ig­
nition, the headlights will go
off and only the
side marker lights will remain lit.
Daytime running lights
USA models: The daytime running lights will
come on automatica lly when the ign ition is
sw itched on and the light switch is in the position
AUTO (only in daylight conditions).
Canada models: The daytime running lights will
come on automatica lly when the ign ition is
sw itched on and the light switch is in the position
0, AUTO (only in daylight condit ions) or :oo;.
46
Automatic head- and taillight control
In the switch position AUTO the automatic head­
and taillight contro l is activated . Light sensors
are located in the ins ide mirror housing and con­
stantly check the light conditions surrounding
the vehicle. If ambient brightness falls below a
factory set value (e.g. when driving into a tun­
nel), the head- and taill ights including the li­
cense plate illumination are automatically turned
on . When ambient brightness increases again,
the externa l lights are turned
off again~,& . In
the switch position
AUTO , the low beams are
turned
off when the ignition is switched off. The
remaining lights are turned
off when the key is
taken o ut of the ignition lock .
With automatic head-and taillight control, the
high-beam function is also available, but with
one restriction: If you have not switched the high
beams back to low beams during automatic
headlight operation (for example, after driving
through a tunne l), only the low beams come on
the next time automatic headlights are switched
on . To use the high beams, you first have to pull
the h igh beam lever back and then push the lever
forward again.
The side marker lights and headlights can be
switched on manually by turn ing the light sw itch
to the des ired pos it ion .
Light sensor malfunction
If there is a light sensor ma lfunction, the symbol
El comes on in the display. For safety reasons,
the low beams are turned on permanently with
the sw itch in
AUTO. H owever, you can continue to
turn the lights on and
off using the light sw itch.
Have the light sensor checked as soon as possible
at an authorized Audi dealer .
Coming home/leaving home function
The function is sw itched on when the sw itch is in
the
AUTO pos ition and the function is shown as
active in the driver information system.
The
coming home function illuminates the area
around t he vehicle when the igni tion is switched
off and the driver's door is opened. The length of
time the lights rema in on can be set in the menu
display
( Lights > Exterior lights > coming home ). IJJ,,

.... N
l'­
N "1: .... I.O
"' N
"' ....
The leavin g home function i lluminates the area
around the vehicle when un locking it .
A WARNING
-Never use daytime running lights to see
where you are going. They are not bright enough and w ill not let you see far enough
ahead for safety, especially at dusk or when it is dark . Be aware of changes in outside
light cond itions when you are dr iv ing and re·
spond by switching on your low beams.
- Automatic head· and taillight control is only
intended to assist the d river. This feature
does not relieve the driver of his responsibi l­
ity to check t he headlights a nd to turn t hem
on manually according to the cur rent lig ht
and visibility conditions. For example, fog
and rain cannot be detected by the light
sensors. Consequent ly, always switch the
headlights on under these weather cond i·
tions and when dr iv ing in the da rk.
- Crashes can happen when yo u cannot see
the road ahead and when you cannot be
seen by other motorists.
- Always turn on the headlights so that you
can see ahead and so that others can see
your car from the back.
- Please observe lega l regulations when using
the light ing systems described .
@ Tips
-Always observe the specific local regulations
for your area when to use your lights.
- Turn on low beams as evening app roaches
or in conditions of poor visib ility.
- Do not attach stickers to the windshie ld in
front of the sensors as this can disab le the
automat ic head- and taill ight control and
the automatic glare-dimming of the rear·
v iew mirror(s) *.
- If you remove the ignit ion from the ign it ion
lock while the headlights are still on, a buz­
zer w ill sound as long as the dr iver's door is
open to remind you to t urn off the lights .
- In the AUTO mode, the low beams are
turned off when the ignition is t urned off.
The remaining lights ar e turned off when
t h e key is taken ou t of the ignition.
Cle ar vi sion
-In cool or damp weather conditions the
head lights may fog
over temporarily on the
inside .
- The c ritical factor is the temperature dif­
ference between the inter io r and the exte·
rior of the hea dlight lens .
- W ith the mai n beams switched on, the
lig ht-em itting area w ill be free of conden­
sation after a short time, however the
e d ges of the glass may still be fogged.
- This physical phenomeno n has no effect
on the life of your veh icle's lighti ng sys ­
tem .
Turn signals and high beam lever
The lever on the left side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher.
t
t
Fig . 56 Turn signal and high bea m leve r
The turn signa l and high beam lever has the fo l­
lowing functions :
Turn signal s¢¢ ©@
.,. Push the lever up as far as it can go to t urn on
the right turn signa l or down to turn on the left
turn signal
q fig. 56.
.,. Move the lever br iefly u ntil you meet res istance
and re lease it to flash three times.
.,. Move the lever (up or down) until you meet re­
sistance and hold it there to determine the
flash ing time fo r the turn signa ls .
High beam ~D @
.,. Push the lever forward to sw itch on the h igh
beam.
.,. Pull the lever back towards yo u to switch off
the high beam.
47

.... N
l'­
N "1: .... I.O
"' N
"' ....
With the door contact circuit, the interior lights
turn on as soon as you unlock the veh icl e or open
the doors . The interior lights are also turned on
when the ignition key is removed . The lights turn
off about 30 seconds afte r the doors are closed .
When the veh icle is locked or when the ignition is
turned o n, the inter ior lights are turned off .
When a door is open , the interior lights are
turned off after about 10 m inutes to preven t bat­
tery draining .
T he brightness of the lights is controlled a uto­
mat ica lly by a d immer when they a re sw itched
on/off.
Instrument panel illumination
T he illumination of the instruments, displays
and the center console can be adjusted .
Fig . 59 In strument pa nel ill uminatio n
You regulate the brightnes s of the ins truments
with the left th umbwhee l
C:1 i::;,fig. 59.
Ign ition ON , light switch at @
With the ignition switched ON, the glow of in ­
strument needles
can be adjusted to appear
brighter or d immer .
Ignition ON , light switch at :oo~ or tD .
With the lights sw itched on, the brightness of in­
strument cluster (i.e. needles, gauges and dis­
plays) a nd center console il lum ination ca n be ad ­
justed .
(D Note
The instrument cluster and center console il­
lum inat io n (gauges and needles) comes on
when you sw itch on the ig nitio n and the
ve hi-
Cle ar vi sion
cle headlight s are off . Be aware of the fo llow ­
ing difference between models b uilt to US or
Canadian specif ications:
- USA models: ill umination of the i nstr ument
cl uster (gauges and need les) , dash and cen­
ter console around the gearsh ift lever is
controlled by a light sensor located in the
instrument panel. The instrume nt pane l il­
lum ination w ill automatically become
dimme r as the daylight fades away and
eventua lly will go out comp letely when out­
side light is very low . Thi s is to rem ind you,
t he driver, to switch on t he headlights be­
fore it gets too dark .
- Cana da model s: instrument panel illumina­
t ion will s tay bright regar dless o f the inten­
si ty of ambien t light . Always be aware o f
changes in outside lig ht conditions while
you are driving. Respond in t ime to fading
daylight by turning the light sw itch to posi­
tion ~D (or "AUTO" if your car is equipped
w ith this feat ure) to turn on your head­
lights .
Luggage compartment light
The light is located on the right side of the lug­
gage compa rtment .
These lights come on automatically when the
front lid is opened . The lights turn off automati­
c a lly if the lid is left o pen fo r more then 10 mi­
nutes .
Vision
Adjusting the exterior mirrors
Fig. 60 Forward sect io n of driver 's armrest: pow er mirr or
con trol s ...
49

..... N
r-­N "': ..... \!) ..,.,
N ..,., .....
A WARNING
-=
Always release t he parkin g brake completely.
A part ially engaged brake will over heat th e
rear brakes, reduce their effect iveness and
cause excess ive wear. This could lead to brake
fai lure and an accident.
([) Note
Only after the ve hicle has come to complete
stop, sho uld you firmly set the parking brake
and move the gearshift lever into a gear.
Parking
Parking
~ Stop t he vehicle using the brake pedal.
~ Set the parking b ra ke firmly.
~ Swi tch off the engine.
~ Move t he se lecto r lever into the P pos ition ( au­
tomatic t ransmis sion )
or move the gearshift
lever into 1st . gear
(manual transmission )
c:>.&_ .
~ When on incl ines or declines, turn the steering
whee l so that t he vehicle w ill roll into the curb
if it beg ins to move .
A WARNING
This is how yo u can reduce the risk of in jury
w hen leav ing you r vehicle.
-
- Never park the vehicle whe re it ca n come i n
co ntact wi th dry g rass, spilled fuel or a ny
other flammable mater ials.
- Never allow anyone - especially small chi l­
dre n -to remai n in t he vehicle when it is
locked. Locke d doors ma ke i t mo re d iff icult
for rescuers to access the passenger com­
partment in the event of an emergency .
Dange r to life!
- Never leave c hildren unsupervised in the ve ­
hicle. C hildren cou ld re lease the par king
brake or move the gearshift lever out of
gear. The vehicle could sta rt to roll away and
cause an accident .
- No matter what the season is, the tempera­
ture in a parked veh icle can reach dangerous
levels.
On th e road
Starting on hills
Applies to vehicles: wit h hill ho ld assist
Hill ho ld assist makes it eas ier to sta rt on hills.
The system is activated when the brake peda l is
depressed
for a few seconds .
After releasing the brake pedal, the b rake power
is he ld for a
brief moment to prevent the vehicle
from rol ling back when starting . At this time, you
can eas ily beg in to move your vehicle.
A WARNING
- I f you did not begin moving imme diate ly af­
ter re leasi ng the b ra ke peda l, unde r ce rtain
cir cumstan ces, the vehicle w ould beg in to
roll bac kward. Depress t he brake pe dal im­
mediately or engage the hand brake.
- Should t he e ngine sta ll, dep ress the brake
pe dal immed iately or enga ge the hand
b rake.
- I n or der to preven t the vehicle from roll ing
back unintentionally when s tarting in s top ­
and-go traffic, keep the brake pe dal de­
pressed for a few seconds before driving off.
(D Tips
You can find o ut if yo ur vehicle is eq uipped
wi th "Hill hold ass ist" at an autho riz ed Au di
d ealersh ip.
Speed warning system
Speed warning system
The speed warning system helps you to keep your
driving speed below a set speed limit .
The speed warn ing system warns the driver if he
exceeds a previously stored max imum speed. A
warning tone will sound as soon as the veh icle
speed exceeds the set speed by about
3 mph
(3 km/h) . At the same t ime, a warning symbo l
appea rs i n the display .
The speed warn ing system has
two warn ing
thre sholds
tha t function independe ntly of each
othe r and t hat have somewhat d iffe rent pu rpos­
es:
69

..... N
r-­N "': ..... \!) ..,.,
N ..,., .....
mats wi ll prevent them from sliding into posi ­
tions that cou ld interfere wit h the peda ls or im­
pa ir safe operation of your veh icle in other ways .
A WARNING
Pedals that cannot move freely can result in a
loss of vehicle control and increase the r isk of
ser ious personal injury.
- Always make sure that floor mats are prop­
erly secured .
- Never place or insta ll floor mats or other
floor coverings in the veh icle that cannot be
properly secured in place to prevent them
from slipping and interfering w ith the ped­
als or the ability to control the veh icle.
- Never place or install floor mats or other
floor coverings on top of already installed
floo r mats. Add itiona l floo r mats and other
cove rings w ill reduce the si ze of the pedal
area and interfere w ith the ped als.
- Always properly reinstall and se cu re f loor
m ats that have been taken ou t for clean ing .
- Always make sure that objects cannot fall
into the dr iver footwell while the vehicle is
moving. Objects can become tr apped under
the brake pedal and accelerator peda l caus ­
ing a loss of vehicle contro l.
Stowing luggage
Loading the luggage compartment
All luggage and other objects must be properly
stowed and secured in the luggage compart­
ment .
Loose items in the luggage compartment can
shift suddenly, changing vehicle handling charac­
ter istics. Loose items can also increase the risk of
serious personal injury in a sudden veh icle ma ­
neuver or in a coll is ion.
In a collis ion, the laws of p hys ics mean that even
smal ler items that are loose in the vehicle will
become heavy miss iles that can cause ser ious in ­
jury . Items in the vehicle possess energy which
va ry w ith vehicle speed and the we ight of the
item. Vehicle speed is the mos t significant fa ctor.
Dr iving Sa fel y
For example, in a frontal collision at a speed o f
30 mp h (48 km/h) , the forces acting o n a 10-lb
(4 .5 kg) object are about 20 t imes the norma l
weight of the item. This means that the weight of the item would sudden ly be about
200 lbs . (90 kg) . You can imagine the injuries
that a 200 lbs. (90 kg) item flyi ng freely throug h
the passeng er compartment co uld cause in a col­
li sion like this.
A WARNING
Imp roperly store d luggage or other items c an
fly through the vehicle causing serio us pe r­
sonal injury in the event of hard braking or an
accident . To help reduce the risk of ser ious
personal injury:
- Always put o bjects, fo r example, luggage o r
other heavy items in the luggage compart­
ment.
A WARNING
Heavy loads w ill influence the way yo ur vehi­
cle hand les . To help reduce the r isk of a loss
of contro l leading to serious pe rsonal injury:
- Always keep in mind when transporting
heavy objects , that a change in the center of
grav ity can also cause changes in vehicle
handling .
- Never exceed the Gross Axle We ight Rating
or the G ross Vehicle We ight Rating specified
on the safety compliance stic ker on the left
door jamb. Exceeding pe rm issib le weight
s ta nd ards c an cause the veh icle to slide and
h a ndle differently.
- Please observe informa tion on safe dr iving
~page 86.
A WARNING
Always make sure that the doo rs, all windows
and the front lid a re secure ly close d and
l ocke d to reduce the r isk of injury when the
vehicle is not be ing used .
- Afte r closing the front lid, always make sure
that it is proper ly closed and locked .
- Never leave your vehicle una ttended espe­
cially with the f ront lid left open . A child
-
91