2015 AUDI R8 SPYDER reset

Instrum ent s a nd w arn ing /indi cator lights
-Never open the engine compartment lid if
you see or hear steam, or if you see engine coolant dripping from the engine compart­
ment. You could burn yourself. Let the en­
gine cool off first until you can no longer see
or hear steam or coo lant escaping .
CD Note
- Mount ing additional lights or accessories in
front of the a ir inlets reduces the cooling ef­
fect of the rad iator. At h igh outside temper­
atures or high engine load, the engine could
ove rheat.
- The front spo ile r has been designed to prop­
erly distribute the cooling air when the veh i­
cle is mov ing. If the spo iler is damaged, this
could reduce the cooling effect and the en­
gine could then overheat. Ask your author­
ized Audi dealer for assistance.
Fuel gauge
The fuel gauge works only when the ignition is
on. When the needle reaches the red area, the
warning light in the instrument cluster will illu­
minate
c:> page 17 Ill Time to ref uel!
CD Note
Never run the tank completely dry! An irregu­
lar supply of fuel can cause engine m isfiring
and fuel could enter into the exhaust system .
The catalytic converter cou ld then overheat
and be damaged.
10
Speedometer with odometer
The speedometer shows you the vehicle speed,
and the odometer shows you how many miles
(kilometers) you have driven.
Fig. 5 Speedo meter close-up: odometer disp lay
The distance driven is shown in mi les (USA mod­
els) or in kilometers (Canada models).
Lower odomet er
The lower odometer shows the tota l number of
miles ( kilometers) driven .
Upper odometer (trip odometer )
The upper odometer shows the total number of miles (k ilometers) driven since you last reset the
odome ter back to zero. You can use this odome­
te r when you want to keep track of how many
miles (k ilomete rs) you have driven for a sing le
trip or errand. The last digit ind icates 1/10 of a
mile (100 meters). You can set the trip odometer
back to zero by pressing the reset button
c:> fig . 5 .
With the ig nition off, push ing of the Set/Check
button
c:> page 8, fig. 3 field lighting for a few seconds .
Malfunction messag e
If there is a malfunction somewhere in the in­
strument cluster,
dEF wi ll appea r in the tripod­
ometer and wi ll stay on. Contact your authorized
Audi dealer to have the problem corrected.
Immobilizer
When the ignition is sw itched on, the data on the
i gnition key are s canned automatically.
If an unauthor ized key was used,
S AF E is dis­
played continuously in the odometer d isplay

.... N
l'­
N "1: .... I.O
"' N
"' ....
Trip computer
Introduction
The trip computer gives you information on cur­
rent and average fuel mileage, average speed ,
fuel range and driving time.
Fig. 8 T ri p comp uter 1 ,....
0
;;i ID
The following
information is continuously evalu­
ated by the trip computer and can be displayed
sequentially in the instrument cluster display:
Fuel range
The estimated cruising range in m iles (km) ap­
pears in the disp lay. The display changes in incre­
ments of 5 miles (10 km) .
Average fuel mileage
The average fuel economy in MPG (l/100 km)
since you last cleared the memory appears in this
d isplay.
Current fuel mileage
The instantaneous fuel consumption in miles per
gallon (l/100 km) is shown in this display . When
the vehicle is stationary , the most recent fuel
consumption is displayed.
Average speed
The average speed in mph (km/h) since the last
time the display was reset appears in the display .
Elapsed time
The length of time that you have been driving
since you last reset the memory appears in this
disp lay. The maximum time period that can be re­
corded is 999 hours and 59 minutes .
Driver information system
Distance
The elapsed distance since the last time the
memory was cleared appears in the disp lay. The
maximum distance that can be recorded is
9,999 .9 mi les (9,999.9 kilometers).
(D Tips
- Fuel consumptions (average and current),
range and speed are displayed in metric
units on Canadian models .
- All stored values will be lost if the vehicle battery is disconnected.
Memories
The trip computer is equipped with two fully au­
tomatic memories.
Fig. 9 Trip computer d is play: memo ry level 1
You can switch between the trip computer 1 and
2 by pressing the
! R ESET I button @ ~page 22,
fig. 10.
You can tell which memory level is currently ac­
t ive by the number or the sign in the display
Q fig . 9. The data from the single-trip memory
(memory level 1) is being displayed if a
1 appears
in the disp lay.
If a 2 is shown, then the data from
the total-tr ip memory is being displayed (memo­
ry level 2).
Single -trip memory (Trip computer 1)
T he single-trip memory stores the tr ip informa­
tion from the time the ignition is turned on until
it is turned off. If the trip is continued
within 2
hours from the time the ignition was turned off,
the new data will be included in the calculation of.,.
21

Driver information system
the current trip information. If the trip is inter­
rupted for
more than 2 hours the memory is re­
set automat ically.
Total-trip memory (Trip computer 2)
Unlike the sing le-trip memory, the total-trip
memory is not reset automatically. This permits
you to evaluate your driving data for the entire
period between manual resets.
Operation
The trip computer is controlled by two switches
on the windshield wiper lever.
------- ®
Fig. 10 Wiper a rm/wiper leve r: controls for the t rip com ·
puter
Selecting the trip computer
• Tap the I Reset ! button @ unt il the trip comput­
er (memory level 1 or 2) appears in the disp lay
¢ page 21, fig. 8.
Selecting the functions
• Push in the upper ( lower) protrusion on the
function selector switch @~
fig. 10. The func­
tions for the trip computer are displayed in suc­
cession on the respective memory levels.
Resetting the function to zero
• Push the I RESE T I button @ for at least two sec-
onds.
You can reset the follow ing values to zero:
- driving time
- distance
- average fuel mileage
- average speed
22
The trip computer only operates when the igni­
tion is on . When you turn on the ignition, the
funct ion that was in use when you last turned the
ignition off will be displayed.
(D Tips
-You can also set the values for the functions
to zero in the menu display
( Reset )
c':) page 2 2.
-All stored values will be lost if the vehicle
battery is disconnected.
Menu display
Introduction
Fig. 11 D isp lay: Start menu
Some functions in your vehicle can be set, acti ­
vated, and controlled by
Menus (e.g . parking sys­
tem•). With these menus you can also select the
i nformation shown in the Driver Information Sys­
tem, which operates only with the ignition
switched on . Operation is contro lled by the
I RESET ! button and the rocker switch on the wip­
er lever
¢page 23, fig. 12 .
The Start menu shows you the different display
types
~ fig . 11. Each dis play type in the Start
menu contains a submenu with additional op-
tions.
Ill-

.... N
l'­
N "1: rl I.O
"' N
"' ....
Set Clock ¢ page 23
Tire pressure c::> page 196
Computer c::> page 2 3
Speed warning c::> page 70
Language c::>page23
Units (distance, fuel consumption,
temperature)
c::> page 23
Lap timer c::> page 25
Lights c::> page 46
Wiper (service position)
c::>page 53
Doors (unlocking and locking
mode, for example Auto-loc k)
c::> page 29, ¢ page 29
Chec k Service c::> page 24
Chassis number c::>page 212
Keys
Menu off The menu display is hidden and
the lap time r appears.
Navigating the menu
Use the rocker switch on the windshield wiper
lever and the
I RESET ! button to operate the
menu and carry out inquiries and selections.
-----®
Fig. 12 Wiper lever: Cont rols fo r th e menu d isplay
Fi g. 13 Display: Start menu
Dr iver inform atio n sy stem
I Reset I button @ and rocker switch @ c::> fig. 12
functions:
To open the menu
• Press the I Reset I button @ until the menu d is ­
play
c::> fig . 13 appears
Selection s and settings
• Press the rocker switch @ to reach a menu dis­
play . The switc h is operated the same as the
disp lay (up/down).
Entering and confirming
• Press the I RESET ! button@.
Returning to the Start menu
.. Press the I RESET ! button longer than 2 seconds
to return from any menu level to the Start
menu.
U sing the rocke r switch, you can select the menus
in the disp lay or change settings . A c ursor ap­
pears on the left in front of the selected va lues.
By pressing the
! RESET I button, you activa te the
selection yo u made or confirm the values you set .
Selected fu nctions are identified with a check
mark or are car ried out directly.
Selecting settings
The Driver Information System settings are
menu-guided.
Fi g. 14 Display: Me nu Sett ings, computer selected (page
1)
.. Press the I RESET ! button. The Start menu ap­
pears
c::> fig . 14 .
.. Press the rocker switch until Set is displayed.
.. Press the
I RESET ! button. All the menus appear. Ill-
23

Driver information system
• Press the rocker switch until the desired line is
highlighted (cursor)~
fig. 14.
• Press the !R ESE T I button.
• If necessary, scroll by se lecting and activating
the symbol for "Next page" or "Previous page".
When you have selected the Computer menu and
activated it by p ressing the
! RESET I button, two
computer levels appear (computer 1 and comput­
er 2) . Now you have to select the level you want
using the rocker switch and activate it with the
I RESET I button .
Service interval display
The service interval display reminds you when
your next service is due.
Fig. 15 Sectio n of inst rument cl uster: Serv ice in terva l dis­
pl ay
The schedule for the next oil change or inspec­
tion is calculated automatically and displayed ac­
cording ly. The display works in two stages:
Service reminder
30 days before the next service is due, a serv ice
reminder appears in the display when you turn on
the ignition.
After about 5 seconds the display sw itches back
to normal. The distance and time remaining are
updated each time the ignition is turned on unti l
the date due for serv ice is reached.
Service due
When the due date for service is reached , the
mes sage
Service due! appears in the instrument
cluster immediately after you turn on the igni­
tion . Additionally, a warning tone sounds. After
24
about 5 seconds the display switches back to nor­
mal.
Calling up the service schedules
If or when an oil change or inspection is due, can
be shown in the instrument cluster by select ing
the se rvice interval display. Select
Check> Serv­
ice
> Oil change or Service by using the I RESET I
button and the rocker switch ¢ page 23, fig. 12.
Resetting the service interval display
Your authorized Audi dealer will reset the corre­
sponding service schedule after performing the
appropriate service on your vehicle . You also have
the possibility to reset the oil change schedule af­
ter having performed an oi l change according to
Audi specifications.
- Switch the ignition on.
- Pull the knob<>
fig. 15. The message. Service
due!
appears.
- Pull the knob until the display
Oil change in
-----mi (km)---days appears. If the I RESE T I
button is not pulled with in 5 seconds, the dis­
play reset mode closes.
(D Note
-Only reset the oil change display when you
have completed an oil change.
-If you disconnect the battery terminals, no
calculations can be made for the service in­
terval display during this time and no serv­
ice reminder will appear. Remember that
observing the proper service intervals is vi­
tally important to extend ing the life of your
vehicle, particularly the engine, and main­
taining its va lue. Even if the mileage driven
is low, the maximum per iod of one year
from one service to the next must not be ex­
ceeded.
@ Tips
The information in the Service Reminder re­
mains stored even when the vehicle battery is
disconnected .

.... N
l'­
N "1: .... I.O
"' N
"' ....
Lap timer
Introduction
You can record and evaluate lap times with the
lap timer in the display¢
page 25, fig. 17. The
time is measured in minutes, seconds and 1/10
seconds. The hours are also shown when the lap
time exceeds
60 minutes . The maximum individ­
ua l measurement is
99 hours.
A WARNING
Please devote your full attention to driving.
As the driver, you have complete responsib ili­
ty for safety in traffic. Only use the functions
in such a way that you always ma inta in com­
plete control over your vehicle in all traffic sit­
uations.
0) Tips
When the lap t imer stopwatch is running, you
can call up the trip computer information
w ith the
! RESET I button.
Calling up the lap timer and timing
A ppl ies to vehicles: with la p t ime r
'---- ®
Fig. 16 Controls
Fig. 17 D isplay: Lap timer
Driver inform atio n sy stem
Calling up the lap timer
.,. Press the I RESET !¢ fig. 16 @ button until the
lap timer ¢
fig. 17 appears.
Timing laps
"' To start timing, press the upper section of the
w iper sw itch @. The time meas urement is
shown in line(!)¢
fig. 17.
.,. To stop timing, press the upper section of the
wiper switch @again. This a lso starts timing
the next round. The previous time moves one
line up, first to line @and then to line@. Line
@ shows the current lap number, for example
LAP 5.
Di splaying inte rm ed iat e time and pau sing
timing
"' To display an intermediate time, press the low­
er section of the wiper switch@. The inter­
mediate time appears in line(!) and is marked
w ith *.
"' To pause timing, press the lowe r section of the
w iper sw itch @again.
"' To conti nue tim ing, press the uppe r section of
t he wiper swi tch @ .
If timing is paused, you can continue it later even
if you sw itch the igni tion off.
Evaluating times and continuing or
resetting timing
You can evaluate the fastest, slowest and aver ­
age lap times.
LAP 5
+ 45:12 .9
59:08.8
9J 51:10.8
F ig. 18 Display: lap time evaluat ion
"' To evaluate lap times, press and ho ld the
IRESE TI ¢ page 25, fig . 16 @ button for ap-
proximately 2 seconds. The display shows the
Iii>
25

Drive r in formation syste m
fastest lap"+", the slowest lap"-" and the aver­
age lap time "0" .
.. To continue t iming for additional laps, press
the wiper switch @ .
.. To reset the timer to zero, press and hold the
I RESET I button again for approximate ly 2 sec ­
onds .
.,. To sw itch the lap timer off comp letely, press
the
I RES ET I button br iefly.
@ Tips
- Saved lap t imes cannot be ind ividually de­
l eted from the total results.
- The saved lap timer values will not be lost
after turn ing the ignit ion off.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Ind icator Lamp (MIL)
llil is part
of the On-Board Diagnostic (OBD II) system .
The warning light illuminates when there is a malfunct ion in the engine electronic system . A
malfunct ion may have various causes:
- The fuel filler cap may be improperly closed
¢ page 153.
- T here is a leak in the fuel vapor recovery sys­
tem .
- The engine control receives faulty vehicle road-
speed signals.
Contact your nearest authorized Audi dealer for
assistance.
I f the light illuminates , the catalyt ic converte r
could be damaged. Continue dr iving
w ith re­
du ced pow er
(avoiding sustained high speeds
and/or rapid accelerations) and have the condi­
tion corrected.
An improper ly closed fuel filler cap may also
cause the MI L light to illuminate
¢ page 153.
26
On-Board Diagnostics
Fig. 19 Locatio n of Data Li nk Co nnector (DLC)
On-Board D iagnostics monitors the components
of your emission control system. Each monitored component in your engine system has been as­
s igned a code. In case of a malfunct ion, the com­
ponent will be ident ified and the fault stored as a
code in the control module memo ry.
In order to make an accurate diagnosis, the stor­
ed data can only be d isplayed using spec ia l diag­
nostic equipmen t (generic scan tool for OBD) .
In order to connect the special diagnostic equip­ ment, push the plug into the Data Link Connector
(DLC) ¢
fig. 19.
Your authorized Audi dealer or a qualified service
station can interpret the code and perform the
necessary repair .
A WARNING
Do not use the d iagnost ic connector for per­
sona l use. Incorrect usage ca n cause ma lfunc­
tions, which can increase the r isk of a coll i­
sion!
-

.... N
l'­
N "1: .... I.O
"' N
"' ....
on the vehicle to make sure it is properly
l ocked.
- Do not use the remote control if you are in­
side the car, otherwise you may unintention­
ally lock the vehicle, and then you would set
off the ant i-theft a larm when you try to
start the engine or open a door . In case this
happens anyhow, push the unlock button©.
- Use the panic funct ion only if you are in an
emergency situa tion.
Resetting the remote control
The remote control must be reset if the vehicle
does no t unlock .
.. Press the unlock button 0 on the remote con­
trol.
.. Manually unlock the driver's door lock with the
mechan ical key wi thin 30 se cond s.
.. Press e ither the lock-
{fl or the unlock CD button
to comple te the reset sequence .
Operating locks with the key
To lock and unlock the vehicle from the outside ,
turn the key in the lock of the driver's door .
Fig. 24 Key turn s for op ening and closin g
.. To un lock the vehicle, tu rn t he key to the open ­
ing position @¢
fig. 24 .
.. To lock the vehicle , turn the key in the lock of
the driver's door to the lock position @
c:> .&_.
A WARNING
Always read and heed WARNING c> A in Gen­
eral description on page 29 .
Opening and clo sing
Locking and unlocking the vehicle from
inside
The vehicle can be locked or unlocked from the
inside using the power locking swi tch .
Fig . 2 5 Sect ion fro m drive r's door : Powe r loc king switc h
.. Press the upper part of the powe r lock ing
sw itch@ to lock the vehicle ¢,&. .
.,. Press lower part o f the sw itch@ to unlo ck the
veh icle .
If you lock the veh icle using the power locking
switch, p lease no te t he following:
- You cannot open the doors from the
outside
(increased security, for examp le when you are
stopped at a red light) .
- The LED in the switch~ lights up when all the
doors and the front lid a re closed and locked.
- Yo u can un lock and open the doors from the in­
side by pulling on the door hand le .
- You ca nnot lock the ve hicle w it h the central
locking switch when the d river's door is open .
- If you have a crash and the airbag is activated,
the doors a utomatically unlock.
A WARNING
-
- If you use the power loc king switch with the
doors closed, remember that all the veh icle
doors w ill lock.
- Locked doors make it more difficult for
emergency workers to get into the veh icle,
which puts lives at r isk. Do not leave anyone
behind in the vehicle, especially children .
31