2015 AUDI Q7 oil

M N
0 ..J
'SI: ,...., \!) ..,.,
,...., ..,., ,....,
Adding engine oil~
Fig. 2 45 Eng ine co mpa rtment : cove r on the e ngin e o il
filler neck
Before you c heck anything in the engine com­
partment,
a lw ays r ead and h eed all WARN ­
ING S
9 A in Working in the engine compart­
ment on page 256 .
"' Shut the engine off.
"' Unsc rew the cap~ to the engine oil fill ing
hole
9 fig . 245, 9page 258, fig. 242 .
"'Carefu lly top off with 0.5 q uarts (0.5 liters)
of the appropriate oi l
9page 258.
"'Check the oil leve l again after two minutes
9 page 260, Checking the engine oil level.
"' Top off the oil again, if necessary.
"' Screw the cap back on the filling hole and
slide the oil d ipst ick in as far as it will go .
A WARNING
Stop! Before working in the engine com­
pa rtment, always read and heed all WARN­
INGS
9 .&. in Working in the engine com ­
partment on page 256.
The engine com ­
partment of any motor vehicle is a poten­
tially dangerous area and can cause ser i­
ous personal injury.
A WARNING
Spilled o il is a fire hazard.
- The oil fille r cap must be properly se­
c u red to prevent oil from being sprayed
on the hot engine and exhaust system
when the eng ine is running.
- The oil leve l must not be above range ~
- danger of converter or eng ine damage!
Checkin g and fillin g 261
Contact an authorized deale rship to draw
off oil, if necessary .
-Audi doe s not re commend the u se of oil
additives. They m ay damage the engine
and ad ve rse ly affe ct you r New Vehicle
War ra nty.
@ For the sake of the environment
- Under no circumstances can the oil come
in contact with the sewage network or
the soi l.
- Observe and follow legal regulations
when disposing of empty oil containers .
· Changing the engine oil
Engine oil must be changed at intervals listed
in the Warranty
& Maintenance booklet.
T he eng ine oi l and oil fi lter m ust be changed
accord ing to the mileage and time intervals
specified in yo ur vehicle's Warranty
& Mainte­
nance booklet. Do not exceed these intervals -
harmful s ludge and deposits from old engine
o il can reduce engine performance and can
lead to expens ive engine repa irs .
Changing oi l at reg ular intervals is so very im­
portant because the lubricat ing properties of
o il decrease gradually during normal vehicle
use. If you are not sure when to have the oil
c h anged, ask your authorized Audi Serv ice Ad­
viso r.
Under some circumstances the engine oil
shou ld eve n be changed more often than
spec ified for normal use. Change o il more of­
ten if you often dr ive short d istances , operate
the ve hicl e in dusty a reas or mostly under
stop- and-go t raffic conditions, or when you
use your veh icle where temperatures stay be ­
l ow freezing point for long periods.
Dete rgent additives in the oil will make fres h
o il look dark after the engine has been ru n­
ning for a sho rt time. This is normal and is not
a reaso n to change the oil more often than
recommended.
ll>-
•
•

26 2 Ch eck ing and filling
8_ WARNING
Stop! Before working in the engine com­
partment, always read and heed all WARN ­
INGS
~ .&. in Working in the engine com­
partment on page
256 . The engine com­
partment of any motor veh icle is a poten­
tially dangerous area and can cause ser i­
ous personal injury.
8_ WARNING ,,,__
If you must change the engine oil in your
vehicle:
- Always wea r eye protection .
- T o reduce the ris k of burns from hot en-
gine oil let the engine cool down to the
touch.
- Whe n removing the oil drain plug with
yo ur fingers, stay as far away as poss ible.
Always keep your forearm paralle l to the
ground to he lp prevent hot oil from run­
ning down your arm.
- Drain the oi l into a container designed
for this pu rpose, one large enough to
hold at least the total amount of oil in
your engine.
- To reduce the risk of poisoning, never use
empty food or beverage containers that
might m islead someone into dr ink ing
from them.
- Engine oil is poisonous. Keep it well out
of the reach of children.
- Cont inuous contact with used engine oil
is harmful to your skin. Always protect
your sk in by washing thoroughly with
soap and water .
(D Note
Never mix oil additives with your engine
oil. These additives can damage your en­
gine and adverse ly affect your Audi Limit­
ed New Vehicle Warranty.
@i For the sake of the environment
- Before changing the oil, first make sure
you know where you can properly dispose of the old oil.
-
.
- Always dispose of used oil p roperly. Nev ­
er dump it on garden soil, in wooded
areas, into st reams or down sewage
dra ins.
- Recycle used oi l by taking it to a used en­
gine oil collection facility in your area, or
contact a service station.
- We strongly recommend that yo u have
your oil changed by an authorized Audi
dealer or a qualified workshop with the
special tools and expert ise required, and
proper means of disposal.
Engine cooling system
Coolant
The engine coolant performs two functions: it
keeps the engine from overheating and it pro­
tects the engine from freezing in the winter.
T he cooling sys tem is sealed and genera lly re­
quires little attention.
The cooling system has been fi lled at the fac­
tory with a permanent coolant which does not need to be changed. The coo lant cons ists of a
mixtu re of specially conditioned water and the
manufacturer's g lycol -basedcoo la nt add
i-
tive G l3 antifreeze with anticorrosion addi ­
tives (SO% for USA mode ls; 60% for Canadian
models). This mixture both assures the neces­
sary frost protection and protects metal com­
ponents in the eng ine's cooling system from
corros ion and scaling.
It also ra ises the bo il­
i ng po int of the coolant .
Do not reduce the concentration of the cool­
ant in the summer by adding p lain wate r. Th e
proportion of coo lant additiv e mu st be at
l e as t 50 °/4 but not m ore than 60°/4
to main­
ta in ant ifreeze protect io n and cooling eff ic ien­
c y.
If the coo lant fros t protection is too low,
the coolant could freeze and damage the vehi­
cle heating and engine cooling system.
For year- round driving, antifreeze is added at
t h e factory fo r temperatures down to:
- -31°F(-35°C)USA
- - 40 °F ( - 40 °C) Canada.

264 Check ing and filling
Coolant lo ss
Coolant loss may indicate a l ea k in t he cooling
system. In the event of coolant loss, the cool ­
ing system should be inspected immediately
by your authorized Audi dealer. It is not
enough merely to add coolant.
I n a
se ale d system, losses can occur only if
the boiling point of the coolant is exceeded as
a result of overheating.
A WARNING
The cooling system is under pressure and
can get very hot. Reduce the risk of scald­
ing from hot coolant by following these
steps.
- Turn off the engine and allow it to cool
down.
- Protect your face, hands and arms from
escaping fluid and steam by covering the
cap with a large, thick rag .
- Turn the cap slowly and very carefully in
a counter-clockwise direction wh ile ap­
plying light, downward pressure on the
top of the cap .
- To avoid being burned, do not spill ant i­
freeze or coolant on the exhaust system
or hot eng ine parts. Under certain condi­
t io ns, the ethy lene g lycol in engine cool­
an t ca n ca tch f ire.
0 Note
Do not add any type of radiator leak seal­
ant to your vehicle's eng ine coolant. Add­
ing radiato r repair fluid may adve rsely af­
fect the function and performance of your
cooling system and could res ult in damage
not covered by your New Vehicle Limited
Warranty .
Adding coolant
Be very careful when adding engine coolant.
Before you check anything i n the engine com­
pa rtmen t,
a lwa ys read and heed all WARN ­
INGS c:::> A in Working in the engine compart ­
ment on page 256.
.. Tu rn off the engine .
.. Let the engine cool down.
.. Place a thick rag over the coo lant expansion
tank
c> page 263 , fig. 246 and carefully
twist the cap counter-clockwise c> ,&. .
.. Add coo lant m ixed in the correct rat io
c:::> page 262, Coolant.
.. Twist the cap o n again tightly.
Rep lacement engine coo lant must conform to
exact spec ificat ions
c> page 262, Coolant.
We recommend using only coo lant add it ive
G12 ++, G13 or in an emergency G12 +. Do
not
use a different add itive. In an emergency use
plain water until you can get the correct addi­
t ive and can restore the correct ratio . This
shou ld be done as soon as poss ib le.
If you have lost a considerab le amount of
coolant, the n you should add cold ant ifreeze
and co ld water on ly when the eng ine is cold .
Always use
new engine coolant when refilling.
Do not fi ll coo lant above the "MAX" mark. Ex­
cess coolant will be forced o ut through the
pressure relief valve in the cap when the en­
gine becomes hot.
A WARNING
- The cooling system is under pressure and
can get very hot. Reduce the risk of
scalding from hot coolant by following
these steps.
- Turn off the engine and allow it to coo l
down.
- Protect your face, hands and arms from
escaping fluid and steam by covering
the cap with a large, th ick rag.
- Turn the cap s low ly and very carefully
in a counter-clockwise direction while
applying light, downward pressure on
the top of the cap.
- To avoid being burned, do not spill an­
tifreeze or coolant on the exhaust sys­
tem or hot engi ne parts. Under certain
cond it ions, the ethylene g lycol in e n­
gine coolant can catch fire .

Tires and wheels
Tires
General notes
Tires may be the least appreci­
ated and most abused parts of
a motor vehicle .
Tires may be the least appreci­
ated and most abused parts of
a motor vehicle. Tires are, how­
ever, one of the most important
parts of a vehicle, particularly
considering the comparatively
small patch of rubber on each
tire that assures that all-impor­
tant contact between you, your
vehicle and the road.
Maintaining the correct tire
pressure, making sure that your
vehicle and its tires do not have
to carry more weight than they can safely handle, avoiding
damage from road hazards and
regularly inspecting tires for
damage including cuts, slashes
irregular wear and overall con­
dition are the most important
things that you can do to help avoid sudden tire failure includ­
ing tread separation and blow-
~ outs.
0 ...J
'SI: ,...., \!) 1.1'1 ,....,
"' ,....,
Tires and wheels 2 71
Avoiding damage
If you have to drive over a curb
or similar obstacle , drive very
slowly and as close as possible
at a right angle to the curb.
Always keep chemicals includ­ ing grease, oil, gasoline and
brake fluid off the tires.
Inspect the t ires regularly for
damage (cuts, cracks or blis­
ters, etc.). Remove any foreign bodies embedded in the treads.
Storing tires
Mark tires when you remove
them to indicate the direction
of rotation. This ensures you to be able to mount them correct­
ly when you reinstall them.
When removed, the wheels or
tires should be stored in a cool, dry and preferably dark place.
Store tires in a vertical position if they are not mounted on
rims, in a horizontal position if
they are mounted on rims.
New tires
New tires have to be broken in
¢ _&. .
The tread depth of new tires
may vary , according to the type .,.
•
•
'

274 Tir es a nd whee ls
Bead Extra load tire
means the part of the tire that means a tire design to operate
is made of steel wires, wrapped at higher loads and at higher
or reinforced by p ly cords and inflation pressures than the
that is shaped to fit the rim . corresponding standard tire .
Bead separation Extra load tires may be identi-
fied as "XL", "xl", " EXTRA
means a breakdown of the bond LOAD", or "RF" on the sidewall.
between components in the
bead .
Gross A xle Weight Rating
(" GAWR ")
Cord
means the load-carrying capaci-
means the strands forming the ty of a single axle system,
p lies in the tire .
measured at the tire-ground in-
Cold tire inflation pressure terfaces.
means the tire pressure recom-
Gross Vehicle Weight Rating
mended by the vehicle manu-( "GVWR ")
facturer for a t ire of a designat-
means the maximum total
ed size that has not been driven loaded weight of the vehicle.
for more than a couple of miles
Groove
(kilometers) at low speeds in
the three hour period before means the space between two
the tire pressure is measured or adjacent tread ribs.
adjusted.
Load rating (code )
Curb weight
means the max imum load that
means the weight of a motor a tire
is rated to carry for a giv-
vehicle with standard equip -en inflation pressure
. You may
ment including the maximum not find th
is information on all
capacity of fuel, oil, and cool- tires because it is not required
ant, air condit ioning and addi- by law.
...
tional weight of optional equip-
ment.

286 Tires and wheels
build-up, sudden tire failure
and loss of control.
-If the tire pressure is too low or too high, the tires
will wear prematurely and
the vehicle will not handle
well.
-If the tire is not flat and you
do not have to change a
wheel immediately, drive at reduced speed to the near­
est service station to check
the tire pressure and add air
as required.
(D Note
Driving without valve stem
caps can cause damage to
the tire valves. To prevent
this, always make sure that
factory installed valve stem caps on all wheels are secure­
ly mounted on the valve .
@ For the sake of the environment
Underinflated tires will also
increase the fuel consump­
tion .
Tires and vehicle load limits
There are limits to the amount
of load or weight that any vehi­
cle and any tire can carry. Ave­
hicle that is overloaded will not handle well and is more diffi­
cult to stop. Overloading can not only lead to loss of vehicle
control, but can also damage important parts of the vehicle
and can lead to sudden tire fail­
ure, including a blowout and
sudden deflation that can cause
the vehicle to crash .
Your safety and that of your passengers also depends on
making sure that load limits are
not exceeded. Vehicle load in­
cludes everybody and every­
thing in and on the vehicle.
These load limits are technical­
ly referred to as the vehicle's
Gross Vehicle Weight Rating
("GVWR") .
The "GVWR " includes the
weight of the basic vehicle, all
factory installed accessories, a
full tank of fuel, oil, coolant
and other fluids plus maximum load. The maximum load in­
cludes the number of passen­
gers that the vehicle is intend ­
ed to carry ("seating capacity")
with an assumed weight of 150 lbs (68 kg) for each pas­
senger at a designated seating
position and the total weight of
any luggage in the vehicle. If ""

M
"' 0 ..J
"". rl I.O
"' rl
"' rl
,&_ WARNING
Sudden tire failure can lead
to loss of control, a crash and
serious personal injury!
-Never drive a vehicle when the tread on any tire is worn down to the wear indica­
tors.
-
-Worn tires are a safety haz­
ard, they do not grip well on
wet roads and increase your
risk of "hydroplaning" and
loss of control.
-Always keep chemicals that
can cause tire damage, such
as grease, oil, gasoline and
brake fluid away from tires.
-Tires age even if they are
not being used and can fail
suddenly, especially at high
speeds. Tires that are more
than 6 years old can only be
used in an emergency and
then with special care and
at lower speeds.
-Never mount used tires on
your vehicle if you are not
sure of their "previous histo­
ry." Old used tires may have
been damaged even though
the damage cannot be seen
that can lead to sudden tire
Tires and wheels 291
failure and loss of vehicle
control.
New tires and replacing
tires and wheels
New tires and wheels hove to
be broken in.
Fig. 254 Tire specification codes on
the sidewall of a tire
No. Description
CD Passenger car tire (where
applicable)
0 Nominal width of tire in
millimeters
® Ratio of height to width
(aspect ratio)
© Radial
® Rim diameter code

300 Tires and wheels
securely and that the brake system functions
correctly .
I n certain circumstances, you may not use
wheel bolts from a different vehicle -even if it
is the same model
¢ page 328.
A WARNING
Improperly tightened or maintained wheel
bolts can become loose causing loss of
control, a collision and serious personal in­
jury.
- Always keep the wheel bolts and the
threads in the wheel hubs clean so the
wheel bolts can turn easily and be prop­
erly tightened.
- Never grease or oil the wheel bolts and
the threads in the wheel hubs. They can
become loose while driving if greased or
oiled, even if tightened to the specified
torque.
- Only use wheel bolts that belong to the
rim being installed.
- Never use different wheels bolts on your
vehicle .
-Always maintain the correct tighten ing
torque for the wheel bolts to reduce the
risk of a wheel loss.
If the tightening tor­
que of the wheel bolts is too low, they
can loos en and come out when the vehi­
cle is moving .
If the tightening torque is
too high, the whee l bolts and threads
can be damaged and the wheel can be­
come loose.
{[) Note
The specified torq ue for the wheel bolts is
120 ft lb (160 Nm) with a tolerance of
± 7,4 ft lb(± 10 Nm). Torque whee l bolts
diagonally. After changing a whee l, the
torque must be checked as soon as possi­
ble with a torque wrench -preferably by an
author ized Audi dealer or qualified work­
shop.
Low aspect ratio tires
Your Audi is factory-equipped w ith low aspect
ratio tires. These tires have been thoroughly
tested and been se lected specifically for your
model for their superb performance, road feel
and handling under a variety of driving condi­
t ions . Ask your authorized Audi dealer for
more details.
The low aspect ratio of these tires is indicated
by a numera l of
55 or less in the tire's size
designation. The numera l represents the ratio
of the tire's sidewall height in relation to its
tread width expressed in percentage. Conven­
t iona l tires have a he ight/w idth ratio of 60 or
more .
The performance of low-aspect-ratio tires is
particularly sensitive to improper inflation
pressure. It is therefore important that low
aspect ratio tires are inflated to the specified
pressure and that the inflation pressure is
regularly checked and maintained. Tire pres­
sures should be checked at least once a
month and always before a long trip
¢ page 282, Checking tire pressure .
What you can do to avoid tire and rim
damage
Low aspect ratio tires can be damaged more
easily by impact with potholes, curbs, gullies
or ridges on the road, particularly if the tire is
underinflated .
In order to minimize the occurrence of impact
damage to the tires of your vehicle, we recom­
mend that you observe the following precau­
tions:
- Always maintain recommended inflation
pressures. Check your tire pressure every
2,000 miles (3,000 km) and add air if neces­
sary .
- Drive carefully on roads with potholes, deep
gullies or ridges. The impact from dr iving
through or over such obstacles can damage
your tires. Impact with a curb may also cause damage to your tires .
- After any impact, immed iately inspect your
tires or have them inspected by the nearest
II>