2015 AUDI Q3 automatic transmission

M N
M N
0 ::i co ,...., \!) ..,.,
,...., ..,., ,....,
A WARNING 1=
You or your passengers could be injured
while changing a wheel if you do not fol­
low these safety precautions:
- If you have a flat tire, move a safe dis­
tance off the road. Turn off the engine,
turn the emergency flashers on and use
other warning devices to alert other mo­
torists.
- Make sure that passengers wait in a safe
place away from the vehicle and well
away from the road and traffic.
- To help prevent the vehicle from moving
suddenly and possibly slipping off the
jack, always fully set the parking brake
and block the wheel diagonally opposite
the wheel being changed with the fold­
ing chocks or other objects. When one
front wheel is lifted off the ground, plac­ ing the Automatic Transmission in "P"
(Park) will
not prevent the vehicle from
moving .
- Before you change a wheel, be sure the
ground is level and firm. If necessary,
use a sturdy board under the jack.
- Always store the vehicle tool kit, the jack
and the replaced tire in the luggage com­
partment
¢ page 100.
(D Note
If you are changing the wheel on a steep
incline, use the folding chock¢
page 217
to block the opposite wheel to prevent the
vehicle from moving.
(!) Tips
Obey all laws.
Changing a wheel
When you change a wheel, follow the se­
quence described below step-by-step and in
exactly that order .
-
1. Remove the decorative wheel cover* or
the
wheel bolt caps*. For more details see
also
¢ page 220.
2. Loosen the wheel bolts<=:> page 220 .
What do I do now? 219
3.
4.
5.
6.
7.
8.
Locate the proper mounting point for the
jack and align the jack below that point
¢ page 221.
Lift the car with the jack ¢ page 221.
Remove the wheel with the flat tire and
then install the
spare tire <=:>page 222.
Tighten all wheel bolts lightly.
Lower the vehicle with the jack .
Use the wheel bolt wrench and
firmly
tighten all wheel bolts in a crisscross pat­
tern ¢
page 220.
9. Replace the decorative wheel cover* or
the
wheel bolt caps*.
A WARNING
Always read and follow all WARNINGS and information<=:>
A in Raising the vehicle on
page 221
and <=:> page 223.
After changing a wheel
A wheel change is not complete without the
doing the following.
.,. Always store the vehicle tool kit, the jack4
and the replaced tire in the luggage com­
partment
¢ page 100.
.,. Check the tire pressure of the spare tire as
soon as possible .
.,. As soon as possible, have the
tightening
torques
on all wheel bolts checked with a
torque wrench. The correct tightening tor­
que is 105 ft lbs. (140 Nm).
.,. Have the flat tire
replaced as soon as possi­
ble.
(D Tips
- If you notice that the wheel bolts are
corroded and difficult to turn while
changing a tire, they should be replaced
before you check the tightening torque.
- Drive at reduced speed until you have the
tightening torques checked.
•
•

M N
M N
0 ::i co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
No.
13
14
15
16
17
18
19
20
23
26
27
28
Consumer
A ir quality/outside air sen-
sor, heated washer jets,
Electronic Stabilization Con-
trol (button), reversing
light, electromechanical
parking brake, o il level sen-
sor, climate control, seat oc-
cup ied recognit ion system,
seat heating, contro ls in
center console, automatic
dimming mirrors
Eng ine control u nit, auto-
matic transmiss ion, bra ke
l ights, electro-mechanical
power steer ing, gateway
control un it, towing bracket
control unit, ESC contro l
unit, light switch, damping
control un it
H eadlight leveling, park ing
brake contro l unit, inst ru-
men t lighting, headlights,
diagnostic connector, adap-
tive light control unit, heat-
er for crankcase, air mass
meter, relay for electr ical
sockets, DC/DC converter
Parking aid
Reversing camera for park-
i ng a id
TV tuner
Eng ine starter cont ro l unit,
DC/DC converter
ESC control unit, air condi-
tioner controls, interface for
spec ial functions
e lectromechanical parking
b rake switch, switches for
interior lighting (front), di-
agnostic connector, light
switch, rain and light sensor,
humidity sensor
Rear window wiper
Starter control un it
Radio/MM I
Amps
5
7,5 10 5
5
5 5
s
10
15
40
15/7,5
Fu ses and bulb s 225
No. Consumer Amps
29
Supply for reversing camera
15 for park ing aid and TV tuner
30 Infot ainment 5
31
Infotainment 5
32
Instr ument cluster 5
33
Automatic dimming rear-
view m irror
10
E lectrica l socket in front
36 cabin, electrical socket in 20
luggage compartment
37 Electr ica l soc ket i n rear cab-
20 in, ciga rette lighter
38 Automatic transmission 15
44
Rear window hea ting 30
45
Parking brake control unit 20
48
Power-operated rear lid 30
so B lower 40
51
Parking brake control unit 20
52
On board supply control unit 20
53
Seat heating, front 30
54
Panoram ic sun roof 20
55
Sun b lind for panorama sun 20
roof
56
Contro l unit fo r suspension
20 cont rol
Engine compartment fuse assignment
The fuse number is given on the plastic be­
neath or above the correspond ing fuse.
No. Electrical equipment
amps
1 Power supply for automatic 5 transmission
2
E lectronic Stabilizat ion Con-
30 t ro l (E SC)
3 Horn 15
4
DC/DC converter 40
5
Onboard supply control unit 5
6
BCM (righ t-side) 30
7
Washer pump 20
8
BCM ( left -side) 30
•
•

M N M N
0 :::i co
rl I.O
"' rl
"' rl
@ Tips
- The discharged battery must be properly
connected to the vehicle's electrical sys­
tem. When jump start ing or charging the
battery, never connect the negative
ground cable to the battery negative post because the battery manager sys­
tem must be able to detect the battery's
state of cha rge . A lways connect the neg­
ative g round cab le to the negative
gro und post o f the battery manage r con­
trol uni t.
Use of jumper cables
Make sure to connect the jumper cobl e
clomps in exactly the order describ ed b elow!
F ig. 171 Engine co mpartmen t: Con ne ctors fo r jum per
c ables a nd char ger
Fi g. 172 Jump s tart in g w ith t he ba ttery of a not her ve ­
hi cle :@ disch arged vehicle battery ,@ booster bat tery
The procedure described below for connecting
jumper cables is intended to provide a jump
start for your veh icle .
V ehicle with discharged batter y:
.. Tu rn off lights and accessories, move lever
of automatic transmission to N (Neutral) or P (Park) and set parking brake .
Emergency situ ation s 229
Connect POSITIVE(+ ) to POSITIVE (+ )
(red )
.. To access the positive terminal, remove the
battery cover
c::> fig. 1 71.
1. Connect one end of the red positive cable
on the
jump sta rt bolt (D c::> fig . 172 (Bolt
under cover = "positive") of the vehicle to
be started @.
2 . Connect th e other end to the pos itive ter-
mina l@ of the booster battery @.
Connect NEGATIVE( -) to NEGATIVE(-)
( black )
3. Connect one end of the black negative ca­ ble to the negat ive termina l@ of the
booster battery @.
4 . Connect the othe r end to the
jump start
bolt @
(Bolt with hex head = "negative")
of the vehicle to be started @.
Starting the engine .,. Sta rt the engine of the veh icle w ith the
booste r ba tte ry @ . Ru n the engine at a
moderate speed .
.. Start engine w it h discharged vehicle battery
@ in the usual manner .
.. If the eng ine fails to start: do not keep the
starter c ranking for longer than 10 seconds.
Wait for about 30 seconds and the n try
aga in .
.. With eng ine runni ng, remove jumpe r cab les
from both vehicles in the exact
reverse o r­
de r .
.,. Fit the cover b ack o nto the battery.
T he battery is vented to th e outside to p revent
gases from enter ing the veh icle inter io r. Ma ke
s u re that the j umper clamps are well connec t­
ed with their
metal parts in full contact with
the battery term inals.
,8. WARNING
To avoid serious personal injury and dam­
age to the veh icle, heed all warnings and
instructions of the jumper cable man ufac­
turer. If in doubt, call for road service .
- J umper cables m ust be long enough so
that the veh icles do not touch.
-

252 Index
Steering wheel
Adjusting steering co lumn ... ... ... ..
66
Indicator light . ........... ... .... .. 16
Multifunction steering wheel . .. ...... 21
Steer ing whee l w ith tiptronic . .. .. .... .. 84
Steps for determining correct load limit .
204
Stopping the engine . . . . . . . . . . . . . . 67, 69
Storage . .. .... ... .... .... .. .. .. .. .. 54
Cup holder door pockets . . . . . . . . . . . . . . 56
Glove compartment . . . . . . . . . . . . . . . . . 55
Sto rage compartments . . . . . . . . . . . . . . . 56
Sunroof
refer to Panorama sunroof . . . . . . . . . . . 38
Sun shades
Emergency closing (roof) ........... ..
39
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Symbols
refer to Warning/indicato r lights .... .. 11
T
Tachomet er . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tail lights
C leaning . .. .. . .. ..... ..... .. .. .. .
171
Technical Data ................ ... ... 234
Technical modifications ....... .... .. . 240
Tether anchors . ...... ... .. .. .. .. .. . 149
Tether strap ... ...... ..... .. .. .. .. . 149
Textiles
Cleaning ................. ... .... .
173
The first 1,000 miles (1,500 km) and after-
wards . .. .. .... ...... ....... .. .. .. .
161
Tie-down rings ... ..... ...... .. .. .. . 101
Tie-downs . . . . . . . . . . . . . . . . . . . . . . . . . . 60
tiptronic .............. ........ ... .. 81
tiptronic (automatic t ransmission) ...... 84
Tire pressure ....... ... .... .. .. .. .. .
201
Tire pressure monitoring system ....... 213
Loss of air pressure ........ .... .... 214
Malfunction .............. ... .. ... 2 14
Resetting tire p ressures .... .. .. .. .. . 215
Tires .. .. .. .. .... .. ... .. .. .... .. ... 195
Low aspect ratio ti res . . . . . . . . . . . . . . . 212
Service life ...... ........... ... .. . 205
Speed rating letter code ......... ... 207
Tire manufacturing date . .. .. .. .. .. . 207
Tire pressure monitor ing system .. ... 213
r ·f· t · ire spec, 1ca ions ............. .... 207
Tread depth ..... ................. 205
Uniform tire quality grading ......... 209
Winter tires . .. .. ....... ..... .... .
T ires and wheels
Checking tire pressure ............. .
Co ld tire inflation pressure ...... .. . .
o· . 1mens 1ons .... .. ................ .
General notes .. .. ... ... .... ... .. . .
Glossa ry of tire and lo ading terminolo-
gy .......... ... ................ .
210
201
199
206
195
1 96
New tir es and wheels ..... ...... .. .. 206
Replac ing . ...... ................ . 207
Snow chains . .. .. ...... ....... .... 211
T ires and vehicle load limits . .. .. .. .. 203
Wheel bolts ... .. ................. 212
W inter tires ..... ................. 210
Tire service life .. .. ................ . 205
Tool kit .... .. .. .. ...... ....... .... 216
T orn or frayed safety belts
Towing Front eyelet ... .. ....... ...... .. . .
Rear eyelet .. .. .. .. ........ .... .. .
T ow t ruck procedures ............. . .
TPMS 107
231
231
230
Tire pressure monitoring system 2 13, 214
T rai ler towing ..... ................. 166
Ope rating inst ructions .......... .... 1 67
Parking systems .. ... .. .... .... .. .. . 93
Technical requiremen ts . . . . . . . . 166, 167
Tongue load . .. ....... ........... . 16 7
Trailer towing tips ................ . 168
Trailer turn signal assembly
Warning/ indi cator lights . ....... .... .
19
Transmission .. .. .. ... .. .... .... .... . 81
Transmission malfunction (indicator light) 85
Transport Canada .. ................ . 102
Tread Wear Indicator (TWI) ... .... .. .. 205
Trip computer
Fuel consumption . . . . . . . . . . . . . . . . . .
22
Mileage ......... .......... ...... .. 22
Trip odom ete r ... .. ................ .. 23
Trunk
refer to Luggage compartment ... .. .. . 59
Trunk lid
refer to Rear lid . . . . . . . . . . . . . . . . . . . . 34