2015 AUDI A3 CABRIOLET soft top

....,
N
r--. > co
rl I.O
"' rl
"' rl
,&_ WARNING
Read and follow the im po rt an t sa fety p re ­
cautions i n
c::> & in Opening and closing
the power top on page 41 .
Power top storage compartment
Fig. 2 9 Luggage compar tm en t: powe r to p sto rage
co mpa rt ment lowe red
F ig. 30 Luggage compart men t: power top storage
compartme nt ra ised
The power top storage compa rtment must b e
l owe red to open the power top . To avo id dam­
a ge, make sure that a re no sensi tive o bje cts in
the s tor age compartmen t's range of mo tion .
Raising the power top storage
compartment
"P ress the trim on the hand le in the d irect io n
of the arrow to raise t he power top s torage
compartment
c::> fig. 2 9.
Lowering the power top storage
compartment
" Press the trim on the handle in the direct io n
of the arrow to lower the power top s torage
compartment
c::> fig. 30 .
The power top storage comp artmen t can be
ra ised when the
power top i s closed . This pro-
Power top 43
vides more cargo space in the luggage com ­
partment.
T he
open power top is sto red and pr otec ted in
t he power top s torage compar tment . The
power top storage compa rtment cannot be
raised when the power top is open. Because of
th is, the cargo area in the luggage compart ­
ment is smaller when the powe r top is open
than when it is closed.
Messages
Soft top: pl ease close trunk lid
This message appears in the instrument cl us­
ter display if the luggage compartment is not closed w hen the power top is operated . Close
the luggage compart ment lid.
Soft top : please lower soft top compartment
T his mess age ap pears if the power top stor ­
age compartment is not lowered when ope n­
ing t he power top. Lower the power top stor­
age compartment ¢
page 43.
Soft top: operation not pos sible
T h is message appears w hen t here is a mal­
func tion. T he powe r top can be o pe ra ted man­
u ally
c::> page 4 5 .
Soft top: operation not pos sible at pres ent
If the power top is operated continually for a
long period of time, the overload protect ion
activates for app rox imately 15 to 30 mi nutes .
You can o pen or close the powe r top aga in af­
te r that.
Soft top: operation not possible at present .
Engine must be running
The power top is a utomat ica lly deactivated if
the battery vo ltage is low. Yo u can open or
close t he power top again after start ing the
engine.
Soft top : operation not possible at present .
Outside temperature too low
The powe r top w ill not open when the tem per-
atu re is be low - 15
°C. ~

44 Power top
Soft top: operation not p ossible. Sp eed t oo
h igh
I f you go above 30 mp h (SO km/h), the power
top cannot be operated due to safety reasons. Reduce the vehicle speed to close or open the
power top.
S oft top: not at limit po siti on. s peed too
high
This m essage appears if you go above 30 mph
(50 km/h) when operati ng the power top. Re­
d uce the vehicle speed and opera te the power
top again .
Soft top s ystem malfunction! You can con­
tinue dri ving
This message appears if there is a malfunction
in the system . T ry to open or close the power
top again . If the message still appears, have
the ma lf u nction corrected by an aut horized
Aud i dealer o r aut ho rized Aud i Service Fac ility.
Soft top sys tem malfunction! You can con­
tinue driving
This message appears if there is a malfunction
in the system . Try to open or close the power
top again.
If the message still appears, then
have an author ized Audi dealer or authorized
Aud i Service Fac ility co rrect the ma lfun ction.
D o not drive more t han 30 mph (50 km/h) u n­
til it is corrected.
8_ WARNING
Never drive when the power top is not
locked correctly . The w ind from dr iv ing
co uld cause the power top to open. Th is
can result in injuries and damage to the
vehicle.
-
Wind deflector
App lies to veh icles: w ith wind deflecto r
The wind deflector reduces turbulence in the
passenger compartment and makes driving
more comfortable.
Fig . 31 Rear of t he veh icle: inse rt in g the wind de flec·
tor
(1)
F ig . 32 Rear of t he veh icle: insert ing the wind def lec ­
to r (2)
The w ind deflector is located in the l uggage
compartm ent in a sto rage bag*.
Inserting and positioning the wind
deflector
"" Open the rear window on the passenger's
side .
~ 0 > a,
"'
.. Remove the wind def lector from the l ug­
gage compa rtment and fo ld i t a part once.
The wind deflector is insta lled in the cor re ct
position when the long side is toward the
front and the wind deflector frame is at the
top .
.. Insert both p ins on the wind def lector
(D
r::;, fig. 31 into the mounts in the side trim on
the dr ive r's side.
" Fold the handle @upward and lift the cen­
t er of the wind d eflector s light ly @
¢ fig. 32 .
.,_ Now guide the wind deflector into the
mounts on the passenger's side@ and

54 Lig ht s a nd Vis io n
A WARNING
-The rain sensor is only intended to assist
the driver. The driver is still responsible
for manually switching the w ipers on ac­
cording to the v is ibility conditions.
- The windshield may not be treated w ith
water-repe lling windshie ld coat ing
agents. Unfavorable conditions, such as
wetness, darkness or low sun, can result in increased glare. W iper blade chatter is
also possible.
- Properly functioning windshie ld w iper
blades are required for a clear view and
sa fe driving
¢ page 54, Replacing
front windshield wiper blades.
0 Note
- In case of frost, make sure the wind­ shield wiper blades are not frozen to the
windshield. Sw itching on the windshield
wipers when the blades are frozen to the
windshield can damage the wiper blades.
- Prior to using a car wash, the windshield
wiper system must be switched off (lever
in position 0). This prevents unintention­
al sw itching on and damage to the wind­
shield wiper system.
- Do not use the wipers to remove ice from
the windows. Using windshield wipers as
ice scrapers destroys the wiper blades.
{D Tips
- The windshield wipers switch off when
the ignition is turned off. You can acti­
vate the w indshield wipe rs after the igni­
tion is switched back on by moving the
windsh ield wiper leve r to any pos ition.
- Worn or dirty windsh ield wiper blades
result in streaking. Th is can affect the
rain sensor function. Check your w ind­
s h ield wiper blades regularly.
- The washer fluid nozzles in the w ind­
shield washer system are heated* at low
temperatures when the ignit ion is on.
- When stopping temporarily, such as at a
traff ic light, the speed of the windsh ield wipers automatically reduces by one
lev­
el.
- In vehicles with an MMI, you can switch
the rain sensor or off in the
Driver a ssi s­
t a nce
menu.
Cleaning windshield wiper blades
Clean the wiper blades when you see wiper
streaks . Use a soft cloth and a glass cleaner .
.,. Place the windshie ld wiper arms in the serv­
ice pos it ion
¢ page 54.
.,. Fold the windshield wiper arms away from
the windshield.
A WARNING
Dirty windsh ield wiper blades can impair
v is ion, wh ich increases the r isk of an acci­
dent.
(D Note
If you see streaks again after clean ing the
wiper blades, the blades must be replaced
¢ page 54.
Replacing front windshield wiper blades
Fig. SO Re mov ing windshie ld wiper blades
W ipe r se rv ic e po sit ion /bl ad e re pl ace ment
pos ition
.,. To bring the w ipers into the service position,
turn the ignition off and move the wind ­
shield w iper lever into position @
¢ page 53, fig. 49.
.,. To bring the w ipers into the starting posi ­
tion, turn the ign ition on and move t he
windshield wiper lever into position@
¢ page 53, fig. 49 .

....,
N
r--. > co
rl I.O
"' rl
"' rl
belt above the latch tongue and pull it
evenly across the chest so that it sits as
low as possible on the pelvis and there is
no pressure on the abdomen. The belt
should always fit snugly
r=:> fig. 137 . Pull
on the belt to tighten if necessary.
- The lap belt port ion of the safety belt
must be positioned as low as possible
across pelvis and never over the abdo­
men. Make sure the belt lies flat and
snug
c:> fig . 137. Pull on the belt to tight­
en if necessary.
- A loo se-fitting safety belt can cause seri­
ous injuries by sh ifting its position on
your body from the strong bones to more
vulnerable, soft tissue and cause serious
injury.
- Always read and heed all WARNINGS and
other important information
r::;, page 141.
Pregnant women must also be correctly
restrained
The best way to protect the fetus is to make
sure that expectant mothers always wear
safety belts correctly -throughout the preg­
nancy.
Fig. 138 Safety belt pos itio n during pregnancy
To provide maximum protection, safety belts
must always be positioned correctly on the
wearer's body
c:> page 142 .
.. Adjust the front seat and adjustable head
restraint* correctly
c:> page 60, Front seats .
.. Hold the belt by the tongue and pull it even ­
ly across the chest and pelvis
r:!> fig. 138,
QA .
Safety belts 143
.. Insert the tongue into the correct buckle of
your seat until you hear it latch securely
<=:>page 141, fig. 136.
.. Pull on the belt to make sure that it is se­
curely latched in the buckle.
A WARNING
Improperly positioned safety belts can
cause ser ious personal injury in an acc i­
dent.
- Expectant mothers must always wear the
lap portion of the safety belt as low as
possible across the pelvis and below the
round ing of the abdomen.
- Always read and heed all WARNINGS and
other important information
c:> & in Fas­
tening safety belts on page 142.
Unfastening safety belts
Unbuckle the safety belt with the red release
button only a~er the vehicle has stopped.
.. J_
Fig. 139 Releas ing the tongue fro m the buck le
.. Push the red release button on the buckle
r=:> fig. 139. The belt tongue will spring out
of the buckle
r::;, ,&. .
.. Let the belt wind up on the retractor as you
guide the belt tongue to its stowed position .
A WARNING
--Never unfasten safety belt while the vehi­
cle is moving . Doing so will increase your
risk of being injured or kill ed.

204 Care and cleaning
Care and cleaning
General information
Regular, prope r care helps to maintain your
vehicle's val ue . It can also be a requirement
when submitting warranty claims for corro­ sion damage and paint defects on the body.
The necessary care products can be obtained
from your authorized Audi dea ler . Read and
follow the instructions for use on the packag ­
ing.
A WARNING
- Us ing clean ing and care products incor­
rect ly can be dangerous to your hea lth.
- Always store cleaning and care products
out of reach of children to reduce the r isk
of po ison ing.
-
@ For the sake of the environment
- Preferably use environmentally-friendly
products when buying cleaning agents.
- Do not d ispose o f leftover cleaning and
care p rod ucts with household trash.
Car washes
The longer that deposits such as insects, bird
droppings, tree sap or road salt rema in on the
ve hicle, the more the surface can be dam­
aged . High temperatures such as those
caused by sunlight inc rease the damag ing ef­
fect .
Before washing, rinse
off heavy depos its with
p lenty of water .
Stubborn deposits s uch as bird droppings or
tree sap are best removed with plenty of wa­
ter and a m icrofiber cloth.
A lso, was h the underside of your vehicle once
road salt stops be ing used for the season.
Pressure washers
When w ash ing your ve hicl es w ith a pressure
washer, always follow the oper ating instr uc­
tions provided with the pressure washer. This is especially important in rega rd to the p res- sure and sp
raying distance. Do not di rect the
stream of water directly onto seals for the
s ide windows, doors, luggage compartment
li d or hood or onto the tires, rubber hoses, in­
su lating materia l, the power top, sensors* or
camera lenses*. Keep a d istance of at least 16
i nches (40 cm) .
Do not remove snow and ice with a pressure
washer.
Never use rotary nozzles or high pressure noz­
zles .
T he wate r temperature m ust not be above
140
° F (60 °().
Automat ic car washes
Sp ray off the veh icle befo re washing.
Make sure that the w indows and power top
are closed and the winds hield wipers are
off.
Follow instructions from the ca r wash opera­
tor, especially if the re a re accessories attach­
ed to yo ur vehicle.
If possible, use car washes that do not have
brushes .
Washing by hand
Clean the veh icle starting from the top and
working down using a soft sponge or cleaning
brush. Use solvent-free clean ing products .
Washing vehicle s with matte fini sh paint
by hand
To avoid damaging the paint when washing,
first remove dust and large particles from
your vehicle. Insects, grease spots and fi nger ­
pri nts are best removed with a special cleane r
fo r matte finish paint .
Apply the prod uct us ing a microfiber cloth. To
avo id damag ing the pa int surface, do not use
too much pressure .
Rinse the vehicle thoroughly with water. Then
clean using a neutral shampoo and a soft mi­
c rofiber cloth.
Rinse the vehicle thoroughly again and let it
air dry. Remove any water residue using a
shammy.

M N
" > co ,...., \!) ..,.,
,...., ..,., ,....,
Care and cleanin g 205
& WARNING
- Only wash the vehicle when the ignition
is off and follow the instructions from
the car wash operato r to reduce the risk
of accidents.
- To reduce the risk of cuts, protect your­
self from sharp metal components when
wash ing the underbody or the inside of
the whee l housings.
- After washing the vehicle, the braking ef­
fect may be delayed due to mo isture on
the brake rotors or ice in the winter . The
brakes must be dried first with a few
careful brake applicat io ns.
{[) Note
- If you wash th e vehicle in an automatic
ca r wash, yo u m ust fold the exterior m ir­
ro rs in to reduce the r isk of damage to
the mirrors . Power foldi ng exterior m ir­
r o rs* must o nly be folded in and out us­
i ng the power folding function.
- To prevent pa int damage, do not wash
th e veh icle in direc t sun ligh t. -
To reduce the r is k of damage, do no t
wash the powe r top with a pressure
washer.
- To reduce the r is k of damage to the sur­
face, do not use i nsect removing spong­
es, kitchen sponges or similar items.
- Matte finish painted vehicle compo­
nents:
- To reduce the risk of damage to the
surfac e, do not use polishi ng agents or
ha rd wax.
- Neve r use prot ective wax. It can de­
stroy the matte fin is h effect.
- Do not place any stickers o r magnet ic
signs on vehicle parts painted w it h
ma tte fi nish pa in t. The pa int cou ld be
da maged whe n the stickers o r m ag nets
ar e removed.
@ For the sake of the environment
Only wash t he ve hicl e in facili ties spe cially
d es igned for th at p urpose . Th is will re duce
the r is k of d irty wate r contam ina ted with
oil from entering t he sewer system.
Cleaning and care information
When clea ning and caring for individua l vehi­
cle components, refe r to the fo llow ing tab les .
The informa tion contained there is s imp ly rec­
ommendations. Fo r quest ions or for compo -n
ents that are not listed , refer to an author­
i z ed Audi dea ler. Also follow the info rma tion
fo und in ~ &, .
Exterior cleaning
Component Situation Solution
Wind shield wip-
Deposits ¢ page 54, Cleaning windshield wiper blades
er bl ade s
Headlights /
Deposits Soft sponge with a m ild soap solution3>
Tail lights
Sensors /
Deposits Sensors: soft cloth w ith a so lvent-free cleaning product
camera lenses Camera lenses: soft cloth with an alcohol-free cleaning
so lution
Snow/ ice Hand brush/so
lve nt-free de -icing spray
Wheels Road sa lt Water
Brake dust Acid
-free special cleaning so lu tion
E x haust tail Road sa lt Water, cleaning solut ion suitable for stainless steel, if
pipes necessary •
•
•

206 Care and cleaning Component Situation Solution
Powe r top
Deposits Clean water, power top cleaning product,
if necessary.
Clean with the g rain of the fab ric using a soft br ush and
allow to air dry .
Wind deflector Deposits W
ater, m ild soap so lution, if ne cessa rya>
Decorative Deposits Mild soap solution a) if necessary a clea ning so lution
parts/ s u itable fo r stai nless stee l
trim
Paint
Paint damage Refer t
o the paint number on the vehicle data la bel, re-
pair
wi th touch up pa int c:> page 279
Spilled fuel Rinse with water immed ia tely
Surface rust R ust remove r, then protect wit h hard wax; for ques-
t ions, refer t o an a uthorized Audi dealer.
Cor rosion Have i t removed by an autho riz e d Aud i deal er.
Wate r no longer Protect with hard wax (at least twice per year)
beads on the surface
of clean pa int
N o shi ne even
Treat w ith suitable po lish; then app ly paint protectant if
tho ugh paint has the polish that was used does not contain any protec-
been p rotected/ tant
pa int looks poo r
Deposi ts such as in- D
ampen wi th w ater immed iate ly and remove with a m i-
sects, bird drop -
crofiber clot h
pi ngs , tree sap a nd
road salt
G re ase-base d con- Re
move immedia tely wi th a mild soap so lu tion a) and a
ta minant s su ch as so ft clo th
cosme tics or sun -
bloc k
Carbon parts Deposits clean the same way as pai nted pa rts c:> pag e 204, Car
washes
Decorative dee· Deposits Soft sponge w
ith a m ild so ap solution a>
als
a) Mild soap so lu tio n: max imum tw o tab les poon s neut ral s oap in a lite r of wa te r
Internal cleaning
Component Situation Solution
Windows
Deposits Glass cleaner, then w ipe dry
Decorative Deposits Mild soa
p solutional
parts/
trim
Plastic parts
Deposi ts Damp clo th
Heavier deposits Mild soap solution a>, detergent-free p lastic clea ning
so lution, if necessary

....,
N
r--. > co
rl I.O
"' rl
"' rl
The new battery must have the same capacity,
voltage (12-vo lts), amperage, construction
and p lug sealing .
When insta lli ng the bat tery, make sure the ig­
nition and all e lectr ica l consumers are switch­
ed off .
CD Note
Ma ke sure the vent ilat ion hose on the s ide
of the battery is connected, otherwise
fumes or battery acid can leak out.
@) For the sake of the environment
Because of the problem of proper disposal
of a battery, we recommend your author ­
ized Audi dealer change the battery for
you. Batter ies contain su lfuric ac id and
lead and must always be disposed of prop­
erly in compliance with all environmental
regulations. D isposing of vehicle batteries
improperly is very dangerous to t he envi­
ronment.
Windshield washer container
F ig. 171 Engine co mpa rtment: cover on the windsh ield
an d headligh t* washer fluid reservo ir
The washer flu id containe r is marked with the
symbol~ on its cap ¢
fig. 171, q page 216,
fig. 165 .
.,. Before you check anything in the engine
compartment,
always read and heed all
WARNINGS q page 214 .
.,. Lift the filler cap tongue to add washer flu­
id. You can fill the container to the top.
.,. Press the cap back onto the filler neck after
filling the container.
Che cking and Fillin g 22 7
You can find the reservoir capacity in the table
in ¢
page 280 .
Clean water should be used when filling up. If
poss ible, use soft wa ter to prevent scaling on
washe r jets. Always add a g lass cleaner solu ­
tion (with frost protection in the winter).
CD Note
- Do not mix eng ine coolant antifreeze or
any other additives to fill up the wind­
shield washer reservoir.
- Do not use a glass cleaner that contains
pai nt so lvents, there is a risk of damag­
ing the paint.