268 What do I do no w?
-Pull the reversible blade from the screw
driver before you use the hexagonal
socket in the handle to t urn the whee l
bo lts.
- When mounting tires with
unid ire ctional
t re ad design
make s ure the tread pat
tern is pointed the right way
¢ page 268.
-The wheel bolts should be clean and easy
to turn. Check for d irt and corrosion on
the mat ing su rfaces of both the whee l
and the hub. Remove all dirt from these
surfaces before remount ing the wheel.
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction.
Using a spare tire with a tread pattern
int ended fo r use in a specific dir ection
When us ing a spare tire w ith a tread pattern
i ntended for use in a specific direction, please
note t he following:
- The direction of rotation is marked by an ar
row on the side of the tire .
-If the spare t ire has to be installed in the in
correct direction, use the spare tire only
temporarily since the t ire will not be able to
achieve its optimum perfo rma nce character
ist ics with rega rd to aquaplaning, noise and
wea r.
- We recommend that you pay particular at
tent ion to this fact du ring wet weat her and
that you adjust your speed to match road
condit ions .
- Replace the fla t tire w ith a new one and
have it ins talled on your veh icle as soon as
possible to restore the handling advantages
of a unidirectiona l tire .
Notes on wheel changing
Please read the information ¢ page 248, New
tires and replacing tires and wheels
i f you are
go ing to use a spare t ire which is d ifferent
from the tires on your veh icle . After you change a tire:
-
Ch eck the tire pr essure on th e spar e imm e
diatel y after in stallation .
- Hav e th e whe el bolt tight ening torque
c h ec ked with a torque wr ench as soon as
po ssible by your author ized Audi de aler or
a qu alified servic e sta tion.
- With ste el and alloy wheel r im s, the wheel
bolt s ar e c orre ctl y tightened at a torque of
9 0 ft lb (120 Nm ).
- If you notice th at the wheel b olt s ar e co r
rod ed and diffi cult to turn w hile changing
a tire , the y should be repl aced before you
check the t ightening to rque.
- Repl ace the flat tire with a new o ne and
ha ve it in stalled on your vehicle as soon a s
possible. Remount the wheel cov er.
Until then , dri ve with extra care and at re
duc ed sp eed s.
A WARNING
-
- If you are going to equip your vehicle
with tires or rims which differ from those
which were factory installed, then be sure to read the information
¢ page 248,
New tires and replacing tires and
wheels.
- Always make sure the damaged wheel or
even a flat tire and the jack and tool kit
are properly secured in the luggage com
pa rtment and are not loose in the pas
senger compartment.
- In an accident or sudden maneuver they
could fly forwa rd, injuring anyone in the
veh icle.
- Always sto re damaged wheel , jack and
too ls se curely in the luggage compart
men t. Otherwise, in an accident or s ud
den maneuve r they could f ly forwa rd,
causing injury to passengers in the vehi
cle.
