
M N
" > co ,...., \!) 1.1"1 ,...., 1.1"1 ,....,
-Have the airbag system inspected by
your authorized Audi dealer immediate
ly.
(D Tips
The child seats listed in categories A to C have been statically tested by Audi only for
the Advanced Airbag function.
Important safety instructions for using
child safety seats
Correc t use of child safety sea ts substantially
reduces the risk of injury in an accident!
As the driver, you are responsible for the safe
ty of everybody in the vehicle, especially chil
dren:
.. Always use the right child safety seat for
each child and always use it properly
¢ page 175.
.,. Always carefully follow the child safety seat
manufacturer's instructions on how to route
the safety belt properly through the child
safety seat.
.. When using the vehicle safety belt to install
a child safety seat, you must first activate
the convertible locking retractor on the
safety belt to prevent the child safety seat
from moving
¢ page 180.
.,. Push the child safety seat down with your
full weight to get the safety belt really tight so that the seat cannot move forward or
sideways more than one inch (2.5 cm) .
.. Secure unused safety belts on the rear seat
¢page 175.
Always remember: Even though your vehicle is
equipped with an Advanced Airbag system, all
children, especially those 12 years and young
er, should always ride in the back seat proper
ly restrained for their age and size.
_& WARNING
Not using a child safety seat, using the
wrong child safety seat or improperly in stalling a child restraint increases the risk
of serious personal injury and death.
-
Child Safety 173
- All vehicle occupants and especially chil
dren must be restrained properly when
ever riding in a vehicle . An unrestrained
or improperly restrained child could be
injured by striking the interior or by be
ing ejected from the vehicle during a
sudden maneuver or impact. An unre
strained or improperly restrained child is
also at greater risk of injury or death
through contact with an inflating airbag.
- Commercially available child safety seats
are required to comply with U.S. Federal
Motor Vehicle Safety Standard (FMVSS)
213 (in Canada CMVSS 213).
- When buying a child restraint, select
one that fits your child and the vehicle.
- Only use child restraint systems that fully contact the flat portion of the
seat cushion . The child restraint must
not tip or lean to either side. Audi does
not recommend using child safety
seats that rest on legs or tube-like
frames. They do not provide adequate
contact with the seat.
- Always heed all legal requirements per
taining to the installation and use of
child safety seats and carefully follow
the instructions provided by the manu
facturer of the seat you are using.
- Never allow children under 57 inches
(1.45 meters) to wear a normal safety
belt. They must always be restrained by a
proper child restraint system. Otherwise,
they could sustain injuries to the abdo
men and neck areas during sudden brak
ing maneuvers or accidents.
- Never let more than one child occupy a
child safety seat.
- Never let babies or older children ride in
a vehicle while sitting on the lap of an
other passenger .
- Holding a child in your arms is never a
substitute for a child restraint system .
- The strongest person could not hold
the child with the forces that exist in
an accident. The child will strike the in
terior of the vehicle and can also be
struck by the passenger .
•
•
•

....,
N
" > co
rl I.O
"' rl
"' rl
Secure unused safety belts on the rear
seat
F ig. 148 Schematic overview: keep un used safety belts
away from chi ld re n in c hild saf ety seats .@ - outer rear
safety belt
If a child safety seat is used o n the rear bench,
espec ially with LATCH universal lower ancho
rages, the unused safety belts
mu st be se
cured so that the ch ild in the ch ild restra int
cannot reach them
¢ ,&. .
- Gu ide the safety belt webbing @behind the
head restraint of the seat where the child re
stra int is ins ta ll ed
¢ fig. 148. When do ing
so , do not engage the switchable locking re
tractor! You should not hear a "clicking"
sound when wind ing up the safety be lt.
- Let the belt re tractor wind up the safety be lt
webbing .
_& WARNING
A child in a child safety seat installed with
the LATCH lower anchorages or with the
standard safety belt or a child in a booster
seat on the rear seat could play with u n used rear seat safety belts and become en
tangled . This could cause the child serious
pe rsonal in jury and even deat h.
-Always secure u nused rear seat safety
belts out of reach of ch ildren in ch ild
sea ts such as by properly routing them
around the head res traint of the sea t
whe re the child restraint is installed.
- Never act ivate the convertib le loc king re
tra ctor when rout ing the safety belts
around the head res traints .
Child S afety 175
Child safety seats
Infant seats
Babies and infants up to about one year old
and 20 lbs. or 9 kg need special rearward-fac
ing child restraints that support the back,
neck and head in a crash .
Fig. 14 9 Schem atic ove rv ie w : re arward-fac ing in fant
se at, p rope rly insta lled on t he re ar seat
.. When using the vehicle safety belt to install
a child safety seat, you must first activate
the convertib le locking retractor on the
safety belt to prevent the child safety seat
from mov ing
¢ page 180 or install the seat
using the LATCH attachments .
.. Push the chi ld safety seat down w ith your
full weight to get the safety be lt really tight
so that the seat cannot move forward or
sideways more than one inch (2.5 cm).
.. Secure unused safety bel ts on the rear seat
¢ page 175.
Infants up to about one year (20 lbs. or 9 kg)
a re best pro tected in spec ial infant carriers
and child safety seats designed for their age
group . Many experts believe that infants and
small ch ildren shou ld ride on ly in special re
stra in ts in which the child faces the back of
the vehicle. These infa nt sea ts support the ba
by 's back, neck and head i n a crash
¢ fig. 149 .
The airbag on the passenger side makes the
front seat a potentia lly dange rous place for a
ch ild to ride . The front seat is not the safest
place for a child in a fo rward-facing child seat.
It is a very dangerous place for an infant or a
larger child in a rearward-facing seat.
ll>

1 76 Child Safety
& WARNING
Not using a child safety seat, using the
wrong child safety seat or improperly in
stalling a child restraint increases the risk of serious personal injury and death in a
crash .
- Never install rear-facing child safety
seats or infant carriers on the front pas
senger seat - even with an Advanced Air
bag System. A child will be seriously in
jured and can be killed when the inflat
ing airbag hits the child safety seat or in
fant carrier with great force and smashes
the child safety seat and child against
the backrest, door or roof¢
page 148,
Child restraints on the front seat -some
important things to know.
- Always install rear-facing child safety
seats or infant carriers on the rear seat.
- Never install a rear-facing child restraint
in the forward-facing direction . Such re
straints are designed for the special
needs of infants and very small children
and cannot protect them properly if the
seat is forward-facing.
- If you must install a rearward facing
child safety seat on the front passenger
seat because of exceptional circumstan
ces and the
PASSENGER AIR BAG OFF
light does not come on and stay on, im
mediately install the rear-facing child
safety seat in a rear seating position and
have the airbag system inspected by your
Audi dealer.
- Never place or use any electrical device
(such as a laptop, CO player, electronic
games device, power inverter or seat
heater for child seats) on the front pas
senger seat if the device is connected to
the 12-volt socket or the cigarette light
er socket.
- If a seat heater has been retrofitted or
otherwise added to the front passenger
seat, never install any child restraint sys
tem on this seat.
- Make sure that there are no wet objects
(such as a wet towel) and no water or other liquids on the front passenger seat
cushion.
- Never place objects on the seat (such as
a laptop, CO player, electronic games de
vice, power inverter or seat heater for
child seats). These may influence the
electrical capacitance measured by the
capacitive passenger detection system
and can also fly around in an accident
and cause serious personal injury.
- Always read and heed all WARNINGS
whenever using a child restrained in ave
hicle is being used
~page 138, Safety
belts,
~ page 146, Airbag system and
¢ page 169, Important things to know.
Convertible child safety seats
Properly used convertible child safety seats
can help protect toddlers and children over
age one who weigh between 20 and 40 lbs. (9
and 18 kg) in a crash.
Fig . 150 Sc hema tic overview: installat ion of the at
tachments applicab le to a LATCH seat
Fig. 151 Schemat ic overv iew: inst allation of the seat
u sing the vehicl e's safety belt system
.. When using the vehicle safety belt to install
a child safety seat, you must first activate
the convertib le locking retractor on the
safety belt to prevent the child safety seat ..,_

1 78 Child Safety
- Always move the front passenger seat in
to the rearmost position of the passen
ger seat's fore and aft adjustment range,
and as far away from the airbag as possi
ble before installing the child restraint .
- Always make sure that nothing prevents
the front passenger's seat from being
moved to the rearmost position in its
fore and aft adjustment range.
- Always make sure the backrest is in an
upright position .
- Never place or use any electrical device
(such as a laptop, CD player, electronic
games device, power inverter or seat
heater for child seats) on the front pas
senger seat if the device is connected to
the 12-volt socket or the cigarette light
er socket.
- If a seat heater has been retrofitted or
otherwise added to the front passenger
seat, never install any child restraint sys
tem on this seat.
- Make sure that there are no wet objects
(such as a wet towel) and no water or
other liquids on the front passenger seat
cushion.
- Never place objects on the seat (such as
a laptop, CD player, electronic games de
vice, power inverter or seat heater for
child seats). These may influence the
electrical capacitance measured by the
capacitive passenger detection system
and can also fly around in an accident
and cause serious personal injury .
- Make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on all the
time whenever the ignition is switched
on.
- If the PASSENGER AIR BAG OFF light
does not come on and stay on, immedi
ately install the forward-facing child seat
at a seating position on the rear seat and
have the airbag system inspected by your
authorized Audi dealer.
- Take the child restraint off the front pas
senger seat and install it properly at one
of the rear seat positions if the
PASSEN- GER AIR BAG OFF
light
does not stay on
whenever the ignition is switched on.
Booster seats and safety belts
Properly used booster seats can help protect
children weighing between about 40 lbs. and
80 lbs. (18 kg and 36 kg) who are less than 4
ft. 9 in. tall. 9 in. (57 inches/1.45 meters)
tall.
Fig. 1S2 Rear seat : child properly restrained in a boos·
te r seat
The vehicle 's safety belts alone will not fit
most children until they are at least 4 ft. 9 in.
(57 inches/1.45 meters) tall and weigh about
80 lbs .
(36 kg). Booster seats raise these chil
dren up so that the safety belt will pass prop
erly over the stronger parts of their bodies
and the safety belt can help protect them in a
crash.
" Do not use the convertible locking retractor
when using the vehicle's safety belt to re
strain a child on a booster seat.
"The shoulder belt must lie as close to the
center of the child's collar bone as possible
and must lie flat and snug on the upper
body. It must never lie across the throat or
neck . The lap belt must lie across the pelvis
and never across the stomach or abdomen.
Make sure the belt lies flat and snug . Pull on
the belt to tighten if necessary .
"Secure unused safety belts on the rear seat
~page 175.
Children up to at least 8 years old (over 40 lbs
or 18 kg) are best protected in child safety
seats designed for their age and weight . Ex
perts say that the skeletal structure, particu
larly the pelvis, of these children is not fully ...

180 Child Safety
-Always remember that a child leaning
forward, sitting sideways or out of posi
tion in any way during an accident can be
struck by a deploying airbag . This will re
sult in serious personal injury or death .
- If you must install a booster seat on the
front passenger seat because of excep
tional circumstances the
PASSENGER
AIR BAG OFF
light must come on and
stay on, whenever the ignition is switch
ed on.
- If the
PASSENGER AIR BAG OFF light
does not come on and stay on, perform
the checks described¢
page 158, Moni
toring the Advanced Airbag System.
- Take the child restraint off the front pas
senger seat and install it properly at one
of the rear seat positions if the
PASSEN
GER AIR BAG OFF
light does not stay on
whenever the ignition is switched on.
- Always read and heed all WARNINGS
whenever using a child restrained in
ave
hicle is being used¢ page 138, Safety
belts,¢ page 146, Airbag system
and
¢page 169, Important things to know .
Installing a child safety
seat
Securing a child safety seat using a
safety belt
Safety belts for the rear seats and the front
passenger can be locked with the convertible
locking retractor to properly secure child
safety seats.
The safety belts emergency locking retractors
for the rear seats safe ty belts and for the
front passenger's seat safety belt have a con
vertible locking retractor for child restraints.
The safety belt must be locked so that belt
webbing cannot unreel. The retractor can be
activated to lock the safety belt and prevent
the safety belt webbing from loosening up
during normal driving. A child safety seat can
only be properly installed when the safety belt
is locked so that the child and child safety
seat will stay in place. Always
remember: Even though your vehicle is
equipped with an Advanced Airbag system, all
children, especially those 12 years and young
er , should always ride in the back seat proper
ly restrained for their age and si ze.
A WARNING
=
Improperly installed child safety seats in -
crease the risk of serious personal injury
and death in a collision .
- Always make sure that the safety belt re
tractor is locked when installing a child
safety seat. An unlocked safety belt re
tractor cannot hold the child safety seat
in place during normal driving or in a
crash.
- Always buckle the child safety seat firmly
in place even if a child is not sitting in it.
A loose child safety seat can fly around
during a sudden stop or in a collision.
- If the backrest is not securely latched,
the child and the child restraint will be
thrown forward together with the back
rest and will strike parts of the vehicle
interior. The child can be seriously in
jured or killed .
- Never install rear-facing child safety
seats or infant carriers on the front pas
senger seat. A child will be seriously in
jured and can be killed when the passen
ger airbag inflates.
- The inflating airbag will hit the child
safety seat or infant carrier with great
force and will smash the child safety seat and child against the backrest, center
armrest, door or roof.
- Always install rear-facing child safety
seats or infant carriers on the rear seat.
- Forward-facing child safety seats or in
fant carriers installed on the front pas senger's seat may interfere with the de
ployment of the airbag and cause serious
injury to the child.
- It is safer to install a forward-facing
child safety seat on the rear seat.
- Always read and heed all WARNINGS
whenever using a child restrained in ave-
hicle is being used
¢ page 169. Special ..,.

182 Child Safety
Activating the convertible locking retractor
Use the convertible locking retractor to se
cure a child restraint.
Always heed the child safety seat manufactur
er's instructions when installing a child re
straint in your vehicle. To activate the conver
tible locking retractor:
• Place the child restraint on a seat, prefera
bly on the rear seat.
• Slowly pull the belt
all the way out.
• Route it around or through the child re
straint belt path¢.&_ .
• Push the child safety seat down w ith your
full weight to get the safety belt really tight.
• Insert the belt tongue into the buckle for
that seating position.
• Guide the safety belt back into the retractor
until the belt lies flat and snug on the child
safety seat .
• You should hear a "clicking " noise as the
belt winds back into the inertia reel. Test the
convertible locking retractor by pulling on
the belt. You should no longer be able to
pull the belt out of the retractor. The con
vertible locking retractor is now activated.
• Make sure that the red release button is fac
ing away from the child restraint so that it
can be unbuckled quickly .
•Pullon the belt to make sure the safety belt
is properly tight and fastened so that the
seat cannot move forward or sideways more
than one inch (2.5 cm).
.&_ WARNING
Using the wrong child restraint or an im
properly installed child restraint can cause
serious personal injury or death in a crash.
- Always make sure that the safety belt re-
tractor is locked when installing a child
safety seat. An unlocked safety belt re
tractor cannot hold the child safety seat in place during normal driving or in a
crash .
- Always buckle the child safety seat firmly
in place even if a child is not sitting in it.
-
A loose child safety seat can fly around
during a sudden stop or in a crash.
- Always make sure the seat backrest to
which the child restraint is installed is in
an upright position and securely latched
into place and cannot fold forward. Oth
erwise, the seatback with the child safety
seat attached to it could fly forward in
the event of an accident or other emer
gency situation.
- Always read and heed all WARNINGS
whenever using a child restrained in ave
hicle is being used
¢page 169. Special
precautions apply when installing a child
safety seat on the front passenger seat
¢ page 148, Child restraints on the front
seat -some important things to know.
'
Deactivating the convertible locking
retractor
T he convertible locking retractor for child re
strain ts will be deactiva ted automatically
when the bel t is wound all the way back in to
the retractor .
• Press the red button on the safety belt buck
le . The belt tongue will pop out of the buck
le .
• Guide the safety belt all the way back into
its stowed position .
Always let the safety bel t retract completely
into its stowed position . The safety belt can
now be used as an ordinary safety belt with
out the convertible locking retractor for child
restraints.
If the convertible locking retractor should be
activated inadvertently, the safety belt must be unfastened and guided completely back in
to its stowed position to deactivate this fea
ture. If the convertible locking retractor is not
deactivated , the safety belt will gradually be-
come tighter and uncomfortable to wear.
11>-

M N
" > co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
A WARNING 1= •
Improperly installed child safety seats in-
crease the risk of serious personal injury
and death in a collision .
- Never unfasten the safety belt to deacti
vate the convert ible lock ing retractor for
child restraints while the veh icle is mov
ing. You would not be rest rained and
c ou ld be ser iously injured in an ac cident.
- Always read and heed all WARNINGS
whenever using a child rest rained in ave
hicle is being used
~page 169. Special
precautions apply when installing a ch ild
safety sea t on the front passenger seat
~ page 148, Child restraints on the front
seat -some important things to know.
LATCH Lower
anchorages and tethers
for children
Child Restraint System anchors and how
are they related to child safety
To provide a s imp ler and mor e pract icable way
to attach the ch ild restraint on the vehicle
seat, Fede ral regu lations requi re speci al lower
a ncho rages in veh icles and dev ices on new
chi ld res traints to attach to the vehicle ancho
rages .
The combination of the tether anchorages and
the lower anchorages is now generally called
the
LATCH system for " Lower Anchorages and
T ethers for Children ."
F orward -facing child rest rain ts manuf actured
a ft er Sep tembe r 1, 1999, are require d by U .S .
federal regulations to comply with new child
h ead movement performance requirements .
T hese new performance requirements make a
tether necessary on most new chi ld seats.
Instal ling a child restraint that req uir es a top
tether witho ut one can serio usly impair the
performance of the chi ld restraint and its ab il
ity to protect the ch ild in a co llision . Installing
a child restraint that requires a top tether
Child Sa fet y 183
without the top tether may be a violat ion o f
state law.
Child rest rain t manufacture rs offer LA TCH
lower anchorages on their child seats w ith
hook -on or push -on connectors attached to
adjustable straps.
In add it ion to the LATCH lower anchorages,
these ch ild restraint systems usually requi re
the use o f tether straps to he lp keep the chi ld
restraint firm ly in place.
A WARNING
Improper installation of child restra ints
will increase the r isk of injury and death in
a crash.
-Always follow the instr uctions provided
by the manufacturer of the child re
straint you intend to install in your vehi
cle .
- Never install a child restraint without a
properly attached top tether strap if the
child restraint manufacture r's instruc
tions require the top tether st rap to be
used.
- Improper use of child rest raint LATC H
lowe r ancho rage points can lead to injury
in a collision. The LATC H lowe r anchorage
points are designe d to withstand o nly
those loads impose d by correctly fitted
child restraints .
- Never mo unt two child restra int systems
on one LATCH lower anchorage point.
- Never secure or attach any lugg age or
o ther item to the LAT CH lower anchorag
es.
(D Tips
- I n Canada, the terms "top tether" w ith
" lower universal anchorages" (or "lower
universal anchorage bars") are used to
describe the system.
- In o ther coun tries, the term " ISO FIX" is
used to describe the lower anchorages .
-
•
•
•

....,
N
r--. > co
rl I.O
"' rl
"' rl
Installing a child restraint with LATCH
lower anchorages
Applies to vehicles: with Top Tether
Whenev er you install a child res traint always
follow the child restraint manufacturer's in
structions.
F ig . 156 Lowe r anch ora ges: proper mount ing
Mount ing
.. Make sure th e seatback of the rear seat
bench is in th e upright posit ion and s ecur ely
latched in place .
.. Attach bo th hook-on connectors wi th the
spring c atch release on the child safety seat
onto the LATC H lower anchorage so that the
connectors lock into place~
fig. 156.
.. Pull on the connector attachments to make
su re they are properly attached to the LATCH
lower anchorage .
.. Pull straps tight following the child restra int
manufacturer's instruct ions.
Releasing
.. Loosen the tens ion on the straps following
the chi ld restraint manufacturer's instr uc
t ions .
.. Depress the spring catches to re lease the
anchorage hooks from the lowe r anchorag
es.
Remember: Use tether straps to help keep the
ch ild restraint firmly in p lace.
A WARNING
Improper use of the LATC H system can in
crease the risk of ser ious personal injury
and death in an acc ident.
Child S afety 185
-These anchors were deve loped only for
child safety seats using the "LATCH" sys
tem.
- Never attach other chi ld safety seats,
be lts or other objects to these anchors.
- Always make sure that you hear a click
when latch ing the seat in p lace. If you do
not hear a click the seat is not secure and
could fly forward and hit the interior of
the vehicle, or be e jected from the veh i
cle .
A WARNING
Imp roper installat ion of ch ild rest ra ints
will increase the risk of injury in an acci
dent.
- Always follow the child restraint system
manufac turer's inst ruct io ns for prope r
installation of the c hild restra int system
and p roper use of te ther s traps as well as
the lower anchorages or safety belts in
your vehicle .
- Always read and heed the im portant in
formation and WARNINGS about chi ld
safety and the insta llation of ch ild re
straint systems ~
page 169, Child Safe
ty .
Tether anchors and tether straps
Fig . 1 57 Tether an ch or s: re cess f lap s behi nd the re ar
seatbac ks
T he tether anchors for the rear seating posi
t ions are located in recesses in the rear win
dow shelf ~
fig. 157
A tether is a s tra ight or V- shaped strap that
attaches the top part of a ch ild restraint to
special anchorage po ints in the vehicle .
-