2015.5. PEUGEOT 3008 bulb

.
Direction indicators 123
Hazard warning lamps 1 23
H or n
12

3
ESC system

1
24
Grip control

1
27
Front seat belts

1
29
Airbags
1

32
Safety
Driving recommendations 136
Starting-switching off the engine 1 37
Electric parking brake

1
40
Hill start assist

1
44
Head-up display

1
47
Distance alert

1
49
Speed limiter
1

52
Cruise control

1
55
Manual gearbox
1

58
Electronic gearbox

1
59
Automatic gearbox

1
64
Gear shift indicator

1
68
Stop & Start

1
69
Tyre under-inflation detection

1
72
Parking sensors

1
74
Reversing camera

1
76
Parking space sensors

1
77
Driving
Emergency or assistance 2 52
PEUGEOT Connect Navigation (RT6)
2

55
PEUGEOT Connect Sound (RD5)

3
11
Audio equipment and telematics
Alphabetical index
Fuel tank 1 80
Misfuel prevention (Diesel) 1 83
Running out of fuel (Diesel)

1
84
Opening the bonnet

1
85
Underbonnet - petrol engines

1
86
Underbonnet - Diesel engines

1
87
Checking levels

1
88
Checks
19

1
AdBlue
® additive and SCR system
(BlueHDi Diesel) 1 93
Checks
Tool kit 2 01
Temporary puncture repair kit 2 03
Changing a wheel

2
09
Snow chains

2
14
Changing a bulb
2

15
Changing a fuse
2

21
12 V battery

2
28
Energy economy mode
23

1
Changing a wiper blade
2

32
Towing the vehicle

2
32
Towbar with quickly detachable towball

2
34
Towing a trailer

2
36
Fitting roof bars

2
38
Very cold climate screen

2
39
Accessories
2

40
Practical information
Petrol engines 2 42
Petrol weights 2 43
Diesel engines

2
45
Diesel weights

2
47
Dimensions


250
Identification markings
2

51
Technical data
Contents

4
Exterior
Remote control key 45 - 49
- u nlocking/ locking
-

l
ocating the vehicle
-


battery
Wiper

8
6 -90
Changing a wiper blade

9
0, 232
Demisting-defrosting the rear screen
6

3
Boot, tailgate

5
7-58
-
ope

ning / closing
-
em

ergency release
Temporary puncture repair kit
2

03-208
Changing a wheel

2
09 -213
-
tools
-
removing
Parking sensors

1
74-175
Reversing camera

1
76
Parking space sensors

1
77-178
Quickly detachable towball

2
34-235
Towbar
23

6-237
Towing


232-233
Changing bulbs
2

18-220
-
r

ear lamps
-

3
rd brake lamp
-

n
umber plate lamps
-


foglamps Fuel tank
18

0 -182
Misfuel prevention
1

83
Accessories
2

40-241
Roof bars

2
38
Panoramic sunroof
1

01-102Door mirrors

7
4
Exterior welcome lighting
8

3
Door mirror spotlamps

9
2
Exterior lighting (automatic, directional)
7

7-85
Headlamp beam height adjustment

8
4
Changing front bulbs

2
15 -217
-

f
ront lamps
-


foglamps
-
d

irection indicator repeaters
Very cold climate screen

2
39
Doors

5
4-56
-
ope

ning / closing
-

c
entral locking
-
em

ergency control
Alarm


50-51
Electric windows

5
2-53
ESC: ABS, EBFD, EBA, ASR, CDS
12

4 -126
Grip control

1
27-128
Tyre under-inflation d ete c t i o n
17

2-173
Tyre pressures

1
72, 208, 251
Snow chains

2
14
Over view

11
Maintenance - Technical data
AdBlue® and SCR system 193 -200
Running out of fuel, Diesel 1 84
Checking levels

1
88 -190
-

oil
-

b

rake fluid
-

p

ower steering fluid
-


coolant
-
s

creenwash/headlamp wash fluid
Changing bulbs
2

15-220
-

front
-

rear
Checking components

1
91-192
-

a

ir filter
-
p

assenger compartment filter
-

o

il filter
-

b

rake pads / discs Opening the bonnet

1
85
Under the bonnet, petrol

1
86
Under the bonnet, Diesel

1
87
Petrol engines

2
42
Diesel engines

2
45 -246Identification markings
2

51
Dimensions
2

50
12 V battery

2
28 -230
Load reduction, economy mode
23
1
Engine compartment fuses 2 21, 225 -227Petrol weights

2
43
Diesel weights
2
47-248
Diesel LCV weights 2 49
.
Over view

84
Manual beam
adjustment of
halogen headlamps
To avoid causing a nuisance to other road
users, the beam height of the halogen
headlamps should be adjusted according to the
load in the vehicle.
0.
1 o
r 2 people in the front seats.
-.
3

people.
1.
5

people.
-.
I

ntermediate setting.
2.
5 p

eople + maximum authorised load.
-.
I

ntermediate setting.
3.
D

river + maximum authorised load.
Automatic beam
adjustment with
xenon headlamps
In order to avoid causing a nuisance to other
road users, this system corrects the height of the
xenon headlamps beam automatically and when
stationary, according to the load in the vehicle. If a fault occurs, this warning lamp is
displayed on the instrument panel,
accompanied by an audible signal
and a message in the multifunction screen.
The system then places your headlamps in the
lowest position.
The initial setting is position "0" .If a fault occurs, do not touch the xenon
bulbs. Contact a PEUGEOT dealer or a
qualified workshop.
Visibility

106
F Raise the boot carpet, hooking the two cords on the hooks, then gain access
to the storage box.
Depending on the configuration, this has areas
for storing:
-

a b
ox of spare bulbs,
-

a f
irst aid kit,
-

a t
yre repair kit,
-

t
wo warning triangles,
-


...
Storage box
F To connect a 12 V accessory (max power: 120 W), remove the cap and connect an
appropriate adaptor.
F

T
urn the key to the ignition on position.
12 V accessory socket Luggage retaining net
Hooked onto the stowing rings on the movable
boot floor, the luggage retaining net available
as an accessory enables you to secure your
luggage.
Observe the loads indicated on the side of the
boot, in accordance with the position of the
movable floor.
For safety reasons in case of sharp braking, we
recommend that heavy objects are placed on
the floor as close as possible to the back of the
rear seats.
Fittings

215
Changing a bulb
Model with halogen headlamps
1. Direction indicators (
light-emitting diodes - LEDs).
2.
M

ain beam headlamps (HB3).
3.
D

ipped beam headlamps (H7).
4.
D

aytime running lamps/sidelamps
(

light-emitting diodes - LEDs).
5.
F

oglamps (PS24W). 1.
D

irection indicators (light-emitting
diodes - LEDs).
2. D ipped / main beam directional
headlamps (D1S).
3.
D

aytime running lamps / sidelamps
(light-emitting diodes - LEDs).
4.
F

oglamps (PS24W).
Model with xenon and directional
headlampsFront lampsThe headlamps are fitted with
polycarbonate glass with a protective
coating:
F
d
o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F

u
se a sponge and soapy water or
a
pH neutral product,
F

w
hen using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
Risk of electrocution
Xenon bulbs (D1S) must be replaced
by a PEUGEOT dealer or a qualified
workshop. Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F

D
o not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
10
Practical information

216
Changing main beam headlamp bulbs
(model with halogen headlamps)Changing dipped beam headlamp
bulbs (models with halogen
headlamps)
F Remove the protective plastic cover by pulling the tab.
F

D
isconnect the bulb connector.
F

E
xtract the bulb by pulling and change it.
To refit, carry out these operations in reverse
o r d e r. F
R emove the protective plastic cover by
pulling the tab.
F

W
ithout disconnecting the connector, turn
the body of the bulb a quarter of a turn to
the left to disengage the assembly.
F

D
isconnect the connector to release the
bulb.
To refit, carry out these operations in reverse
o r d e r.
Changing direction indicators
and daytime running lamps /
sidelamps
For the replacement of these LED (light-
emitting diode) lamps, contact a PEUGEOT
dealer or a qualified workshop.
Practical information

217
Changing foglamp bulbs
Contact a PEUGEOT dealer or a qualified
workshop.
F
I
nsert a screwdriver towards the centre of
the repeater between the repeater and the
base of the mirror.
F

T

ilt the screwdriver to extract the repeater
and remove it.
F

D

isconnect the repeater connector.
Changing integrated direction
indicator side repeaters
Changing dipped beam
and main beam headlamp
bulbs (models with xenon
headlamps)
D1S xenon bulbs must be changed by a
PEUGEOT dealer or a qualified workshop
as there is a risk of electrocution.
It is recommended that all D1S bulbs are
changed at the same time if one of them
fails.
You can also contact a PEUGEOT
dealer or a qualified workshop to have
these lamps changed.
To refit, carry out these operations in reverse
o r d e r.
Contact a PEUGEOT dealer or a qualified
workshop to obtain a new repeater.
10
Practical information